CO2 pyrolysis by thermal plasma was investigated,and a high conversion rate of 33% and energy efficiency of 17% were obtained.The high performance benefited from a novel quenching method,which synergizes the convergin...CO2 pyrolysis by thermal plasma was investigated,and a high conversion rate of 33% and energy efficiency of 17% were obtained.The high performance benefited from a novel quenching method,which synergizes the converging nozzle and cooling tube.To understand the synergy effect,a computational fluid dynamics simulation was carried out.A quick quenching rate of 10~7Ks（-1） could be expected when the pyrolysis gas temperature decreased from more than 3000 to 1000 K.According to the simulation results,the quenching mechanism was discussed as follows： first,the compressible fluid was adiabatically expanded in the converging nozzle and accelerated to sonic speed,and parts of the heat energy converted to convective kinetic energy; second,the sonic fluid jet into the cooling tube formed a strong eddy,which greatly enhanced the heat transfer between the inverse-flowing fluid and cooling tube.These two mechanisms ensure a quick quenching to prevent the reverse reaction of CO2 pyrolysis gas when it flows out from the thermal plasma reactor.展开更多
Experiments of CO_2 splitting by dielectric barrier discharge（DBD） plasma were carried out, and the influence of CO_2 flow rate, plasma power, discharge voltage, discharge frequency on CO_2 conversion and process en...Experiments of CO_2 splitting by dielectric barrier discharge（DBD） plasma were carried out, and the influence of CO_2 flow rate, plasma power, discharge voltage, discharge frequency on CO_2 conversion and process energy efficiency were investigated. It was shown that the absolute quantity of CO_2 decomposed was only proportional to the amount of conductive electrons across the discharge gap,and the electron amount was proportional to the discharge power; the energy efficiency of CO_2 conversion was almost a constant at a lower level, which was limited by CO_2 inherent discharge character that determined a constant gap electric field strength. This was the main reason why CO_2 conversion rate decreased as the CO_2 flow rate increase and process energy efficiency was decreased a little as applied frequency increased. Therefore, one can improve the CO_2 conversion by less feed flow rate or larger discharge power in DBD plasma, but the energy efficiency is difficult to improve.展开更多
基金the funding of National Natural Science Foundation of China (Grant No.11775155)
文摘CO2 pyrolysis by thermal plasma was investigated,and a high conversion rate of 33% and energy efficiency of 17% were obtained.The high performance benefited from a novel quenching method,which synergizes the converging nozzle and cooling tube.To understand the synergy effect,a computational fluid dynamics simulation was carried out.A quick quenching rate of 10~7Ks（-1） could be expected when the pyrolysis gas temperature decreased from more than 3000 to 1000 K.According to the simulation results,the quenching mechanism was discussed as follows： first,the compressible fluid was adiabatically expanded in the converging nozzle and accelerated to sonic speed,and parts of the heat energy converted to convective kinetic energy; second,the sonic fluid jet into the cooling tube formed a strong eddy,which greatly enhanced the heat transfer between the inverse-flowing fluid and cooling tube.These two mechanisms ensure a quick quenching to prevent the reverse reaction of CO2 pyrolysis gas when it flows out from the thermal plasma reactor.
基金the support of National Natural Science Foundation of China(No.11375123)
文摘Experiments of CO_2 splitting by dielectric barrier discharge（DBD） plasma were carried out, and the influence of CO_2 flow rate, plasma power, discharge voltage, discharge frequency on CO_2 conversion and process energy efficiency were investigated. It was shown that the absolute quantity of CO_2 decomposed was only proportional to the amount of conductive electrons across the discharge gap,and the electron amount was proportional to the discharge power; the energy efficiency of CO_2 conversion was almost a constant at a lower level, which was limited by CO_2 inherent discharge character that determined a constant gap electric field strength. This was the main reason why CO_2 conversion rate decreased as the CO_2 flow rate increase and process energy efficiency was decreased a little as applied frequency increased. Therefore, one can improve the CO_2 conversion by less feed flow rate or larger discharge power in DBD plasma, but the energy efficiency is difficult to improve.
