A method of fast data processing has been developed to rapidly obtain evolution of the electron density profile for a multichannel polarimeter-interferometer system（POLARIS）on J-TEXT. Compared with the Abel inversio...A method of fast data processing has been developed to rapidly obtain evolution of the electron density profile for a multichannel polarimeter-interferometer system（POLARIS）on J-TEXT. Compared with the Abel inversion method, evolution of the density profile analyzed by this method can quickly offer important information. This method has the advantage of fast calculation speed with the order of ten milliseconds per normal shot and it is capable of processing up to 1 MHz sampled data, which is helpful for studying density sawtooth instability and the disruption between shots. In the duration of a flat-top plasma current of usual ohmic discharges on J-TEXT, shape factor u is ranged from 4 to 5. When the disruption of discharge happens, the density profile becomes peaked and the shape factor u typically decreases to 1.展开更多
The extraordinary mode(X-mode)lower cut-off frequency is proposed for use in the reflectometry diagnostic on ITER for the electron density profile measurement,which is a trade-off between extreme plasma parameters and...The extraordinary mode(X-mode)lower cut-off frequency is proposed for use in the reflectometry diagnostic on ITER for the electron density profile measurement,which is a trade-off between extreme plasma parameters and the accessible probing frequency.In contemporary experiments,the lower cutoff frequency can be identified at the probing frequency below the electron cyclotron frequency(f_(ce)) under certain plasma conditions.We provide here,for the first time,the experimental validation of the use of the lower cut-off frequency for the density profiles via the reflectometry measurement on EAST.The corresponding group delay of the lower cut-off frequency evolves continuously with the upper one,revealing a reasonable radial coverage extension of reflectometry measurement toward the plasma core.It is concluded that the lower cut-off frequency can be used as a supplement to the upper one in the density profile inversion process,which is of particular interest in the high magnetic field and/or density discharge to extend the radial coverage of reflectometry measurement.展开更多
A visible laser-based vibration compensation interferometer has recently been designed for the EAST tokamak and the bench test has been finished.The system was optimized for its installation on EAST.The value of the f...A visible laser-based vibration compensation interferometer has recently been designed for the EAST tokamak and the bench test has been finished.The system was optimized for its installation on EAST.The value of the final optical power before the detectors without plasma has been calculated from the component bench test result,which is quite close to the measured value.A nanometer level displacement（of the order of the laser＇s wavelength） has been clearly measured by a modulation of piezoelectric ceramic unit,proving the system＇s capability.展开更多
基金supported by the National Magnetic Confinement Fusion Science Program of China(Nos.2014GB106000,2014GB106002,and2014GB106003)National Natural Science Foundation of China(Nos.11275234,11375237 and 11505238)Scientific Research Grant of Hefei Science Center of CAS(No.2015SRG-HSC010)
文摘A method of fast data processing has been developed to rapidly obtain evolution of the electron density profile for a multichannel polarimeter-interferometer system（POLARIS）on J-TEXT. Compared with the Abel inversion method, evolution of the density profile analyzed by this method can quickly offer important information. This method has the advantage of fast calculation speed with the order of ten milliseconds per normal shot and it is capable of processing up to 1 MHz sampled data, which is helpful for studying density sawtooth instability and the disruption between shots. In the duration of a flat-top plasma current of usual ohmic discharges on J-TEXT, shape factor u is ranged from 4 to 5. When the disruption of discharge happens, the density profile becomes peaked and the shape factor u typically decreases to 1.
基金supported by the National Key R&D Program of China(Nos.2017YFE0301205 and 2019YFE03040002)National Natural Science Foundation of China(Nos.11875289,11975271,11805136,12075284,and 12175277)China Postdoctoral Science Foundation(No.2021M703256)。
文摘The extraordinary mode(X-mode)lower cut-off frequency is proposed for use in the reflectometry diagnostic on ITER for the electron density profile measurement,which is a trade-off between extreme plasma parameters and the accessible probing frequency.In contemporary experiments,the lower cutoff frequency can be identified at the probing frequency below the electron cyclotron frequency(f_(ce)) under certain plasma conditions.We provide here,for the first time,the experimental validation of the use of the lower cut-off frequency for the density profiles via the reflectometry measurement on EAST.The corresponding group delay of the lower cut-off frequency evolves continuously with the upper one,revealing a reasonable radial coverage extension of reflectometry measurement toward the plasma core.It is concluded that the lower cut-off frequency can be used as a supplement to the upper one in the density profile inversion process,which is of particular interest in the high magnetic field and/or density discharge to extend the radial coverage of reflectometry measurement.
基金supported by the National Magnetic Confinement Fusion Program of China(Nos.2014GB106002,2014GB106003,2014GB106004)National Natural Science Foundation of China(Nos.11105184,11375237,11505238)
文摘A visible laser-based vibration compensation interferometer has recently been designed for the EAST tokamak and the bench test has been finished.The system was optimized for its installation on EAST.The value of the final optical power before the detectors without plasma has been calculated from the component bench test result,which is quite close to the measured value.A nanometer level displacement（of the order of the laser＇s wavelength） has been clearly measured by a modulation of piezoelectric ceramic unit,proving the system＇s capability.
