We design an effective light trapping scheme through engineering metallic gratings and one-dimensional dielectric photonic crystals(PhCs)to increase the optical path length of light within the solar cells.This incorpo...We design an effective light trapping scheme through engineering metallic gratings and one-dimensional dielectric photonic crystals(PhCs)to increase the optical path length of light within the solar cells.This incorporation can result in broadband optical absorption enhancement not only for transverse magnetic polarized light but also for transverse-electric polarization.Even when no plasmonic mode can be excited,due to the high reflection of the PhCs,the absorption in the active region can still be enhanced.Rigorous coupled wave analysis results demonstrate that such a hybrid structure boosts the overall cell performance by increasing the light trapping capabilities and is especially effective at the silicon band edge.This kind of design can be used to increase the optical absorption over a wide spectral range and is relatively independent of the angle of incidence.展开更多
To increase the absorption in a thin layer of absorbing material （amorphous silicon, a-Si）, a light trapping design is presented. The designed structure incorporates periodic metal-insulator-metal waveguides to enha...To increase the absorption in a thin layer of absorbing material （amorphous silicon, a-Si）, a light trapping design is presented. The designed structure incorporates periodic metal-insulator-metal waveguides to enhance the optical path length of light within the solar cells. The new design can result in broadband optical absorption enhancement not only for transverse magnetic （TM）-polarized light, but also for transverse electric （TE）-polarized light. No plasmonic modes can be excited in TE-polarization, but because of the coupling into the a-Si planar waveguide guiding modes and the diffraction of light by the bottom periodic structures into higher diffraction orders, the total absorption in the active region is also increased. The results from rigorous coupled wave analysis show that the overall optical absorption in the active layer can be greatly enhanced by up to 40%. The designed structures presented in this paper can be integrated with back contact technology to potentially produce high-efficiency thin-film solar cell devices.展开更多
A tunable perfect absorber composed of hexagonal-arranged aluminum nano-disk array embedded in the vanadium dioxide(VO_2) film is proposed. The aim is to achieve the tunability of resonance absorption peak in the visi...A tunable perfect absorber composed of hexagonal-arranged aluminum nano-disk array embedded in the vanadium dioxide(VO_2) film is proposed. The aim is to achieve the tunability of resonance absorption peak in the visible and near-infrared regimes. Numerical results reveal that the absorption peak achieves a large tunability of 76.6% while VO_2 undergoes a structural transition from insulator phase to metallic phase. By optimizing the structural parameters, an average absorption of 95% is achieved from 1242 to 1815 nm at the metallic phase state. In addition, the near unity absorption can be fulfilled in a wide range of incident angle(0°–60°) and under all polarization conditions. The method and results presented here would be beneficial for the design of active optoelectronic devices.展开更多
Modulation instabilities in the randomly birefringent two-mode optical fibers （RB-TMFs） are analyzed in detail by accounting the effects of the differential mode group delay （DMGD） and group velocity dispersion （...Modulation instabilities in the randomly birefringent two-mode optical fibers （RB-TMFs） are analyzed in detail by accounting the effects of the differential mode group delay （DMGD） and group velocity dispersion （GVD） ratio between the two modes, both of which are absent in the randomly birefringent single-mode optical fibers （RB-SMFs）. New MI characteristics are found in both normal and anomalous dispersion regimes. For the normal dispersion, without DMGD, no MI exists. With DMGD, a completely new MI band is generated as long as the total power is smaller than a critical total power value, named by Per, which increases significantly with the increment of DMGD, and reduces dramatically as GVD ratio and power ratio between the two modes increases. For the anomalous dispersion, there is one MI band without DMGD. In the presence of DMGD, the MI gain is reduced generally. On the other hand, there also exists a critical total power （Per）, which increases （decreases） distinctly with the increment of DMGD （GVD ratio of the two modes） but varies complicatedly with the power ratio between the two modes. Two MI bands are present for total power smaller than Per, and the dominant band can be switched between the low and high frequency bands by adjusting the power ratio between the two modes. The M1 analysis in this paper is verified by numerical simulation.展开更多
Narrow band mid-infrared(MIR)absorption is highly desired in thermal emitter and sensing applications.We theoretically demonstrate that the perfect absorption at infrared frequencies can be achieved and controlled aro...Narrow band mid-infrared(MIR)absorption is highly desired in thermal emitter and sensing applications.We theoretically demonstrate that the perfect absorption at infrared frequencies can be achieved and controlled around the surface phonon resonance frequency of silicon carbide(SiC).The photonic heterostructure is composed of a distributed Bragg reflector(DBR)/germanium(Ge)cavity/SiC on top of a Ge substrate.Full-wave simulation results illustrate that the Tamm phonon-polaritons electric field can locally concentrate between the Ge cavity and the SiC film,contributed to the improved light-phonon interactions with an enhancement of light absorption.The structure has planar geometry and does not require nano-patterning to achieve perfect absorption of both polarizations of the incident light in a wide range of incident angles.Their absorption lines are tunable via engineering of the photon band-structure of the dielectric photonic nanostructures to achieve reversal of the geometrical phase across the interface with the plasmonic absorber.展开更多
基金Supported by the Postgraduate Innovation Foundation of Jiangsu Province(CX09B_090Z)Postgraduate Planting Plan of NUST and China Scholarship Council(CSC).
文摘We design an effective light trapping scheme through engineering metallic gratings and one-dimensional dielectric photonic crystals(PhCs)to increase the optical path length of light within the solar cells.This incorporation can result in broadband optical absorption enhancement not only for transverse magnetic polarized light but also for transverse-electric polarization.Even when no plasmonic mode can be excited,due to the high reflection of the PhCs,the absorption in the active region can still be enhanced.Rigorous coupled wave analysis results demonstrate that such a hybrid structure boosts the overall cell performance by increasing the light trapping capabilities and is especially effective at the silicon band edge.This kind of design can be used to increase the optical absorption over a wide spectral range and is relatively independent of the angle of incidence.
基金Project supported by the Postgraduate Innovation Foundation of Jiangsu Province,China (Grant No.CX09B 090Z)the Key Postgraduate Plan of Nanjing University of Science and Technology,China
文摘To increase the absorption in a thin layer of absorbing material （amorphous silicon, a-Si）, a light trapping design is presented. The designed structure incorporates periodic metal-insulator-metal waveguides to enhance the optical path length of light within the solar cells. The new design can result in broadband optical absorption enhancement not only for transverse magnetic （TM）-polarized light, but also for transverse electric （TE）-polarized light. No plasmonic modes can be excited in TE-polarization, but because of the coupling into the a-Si planar waveguide guiding modes and the diffraction of light by the bottom periodic structures into higher diffraction orders, the total absorption in the active region is also increased. The results from rigorous coupled wave analysis show that the overall optical absorption in the active layer can be greatly enhanced by up to 40%. The designed structures presented in this paper can be integrated with back contact technology to potentially produce high-efficiency thin-film solar cell devices.
基金Supported by the National Natural Science Foundation of China under Grant No 41675154the Six Major Talent Peak Expert of Jiangsu Province under Grant Nos 2015-XXRJ-014 and R2016L01+1 种基金the Jiangsu 333 High-Level Talent Cultivation Program under Grant No BRA2016425the Research Innovation Program for College Graduates of Jiangsu Province under Grant No KYCX18_1022
文摘A tunable perfect absorber composed of hexagonal-arranged aluminum nano-disk array embedded in the vanadium dioxide(VO_2) film is proposed. The aim is to achieve the tunability of resonance absorption peak in the visible and near-infrared regimes. Numerical results reveal that the absorption peak achieves a large tunability of 76.6% while VO_2 undergoes a structural transition from insulator phase to metallic phase. By optimizing the structural parameters, an average absorption of 95% is achieved from 1242 to 1815 nm at the metallic phase state. In addition, the near unity absorption can be fulfilled in a wide range of incident angle(0°–60°) and under all polarization conditions. The method and results presented here would be beneficial for the design of active optoelectronic devices.
基金Project supported by the Natural Science Foundation of Jiangsu Provincial Universities(Grant No.14KJB140009)the National Natural Science Foundation of China(Grant No.11447113)the Startup Foundation for Introducing Talent of NUIST(Grant No.2241131301064)
文摘Modulation instabilities in the randomly birefringent two-mode optical fibers （RB-TMFs） are analyzed in detail by accounting the effects of the differential mode group delay （DMGD） and group velocity dispersion （GVD） ratio between the two modes, both of which are absent in the randomly birefringent single-mode optical fibers （RB-SMFs）. New MI characteristics are found in both normal and anomalous dispersion regimes. For the normal dispersion, without DMGD, no MI exists. With DMGD, a completely new MI band is generated as long as the total power is smaller than a critical total power value, named by Per, which increases significantly with the increment of DMGD, and reduces dramatically as GVD ratio and power ratio between the two modes increases. For the anomalous dispersion, there is one MI band without DMGD. In the presence of DMGD, the MI gain is reduced generally. On the other hand, there also exists a critical total power （Per）, which increases （decreases） distinctly with the increment of DMGD （GVD ratio of the two modes） but varies complicatedly with the power ratio between the two modes. Two MI bands are present for total power smaller than Per, and the dominant band can be switched between the low and high frequency bands by adjusting the power ratio between the two modes. The M1 analysis in this paper is verified by numerical simulation.
基金Project supported by the National Natural Science Foundation of Jiangsu Province,China(Grant Nos.BK20191396,BK20180784).
文摘Narrow band mid-infrared(MIR)absorption is highly desired in thermal emitter and sensing applications.We theoretically demonstrate that the perfect absorption at infrared frequencies can be achieved and controlled around the surface phonon resonance frequency of silicon carbide(SiC).The photonic heterostructure is composed of a distributed Bragg reflector(DBR)/germanium(Ge)cavity/SiC on top of a Ge substrate.Full-wave simulation results illustrate that the Tamm phonon-polaritons electric field can locally concentrate between the Ge cavity and the SiC film,contributed to the improved light-phonon interactions with an enhancement of light absorption.The structure has planar geometry and does not require nano-patterning to achieve perfect absorption of both polarizations of the incident light in a wide range of incident angles.Their absorption lines are tunable via engineering of the photon band-structure of the dielectric photonic nanostructures to achieve reversal of the geometrical phase across the interface with the plasmonic absorber.
