采用同轴静电纺丝技术制备聚乳酸(PLA)-聚己内酯(PCL)核-壳结构复合纤维.利用扫描电子显微镜(SEM)观察纺丝电压、收集距离和核层-壳层溶液推进速度对PLA-PCL核-壳结构复合纤维形貌的影响.通过透射扫描电子显微镜(TEM)分析核层-壳层溶液...采用同轴静电纺丝技术制备聚乳酸(PLA)-聚己内酯(PCL)核-壳结构复合纤维.利用扫描电子显微镜(SEM)观察纺丝电压、收集距离和核层-壳层溶液推进速度对PLA-PCL核-壳结构复合纤维形貌的影响.通过透射扫描电子显微镜(TEM)分析核层-壳层溶液推进速度对PLA-PCL核-壳结构形成的影响.研究结果表明:当核-壳溶液推进速度为0.1-0.2和0.1-0.3 m L/h时形成了清晰的核-壳结构;随着壳层溶液推进速度加快,PLA-PCL复合纤维核层含量降低,增加纺丝电压能够有效地降低复合纤维平均直径,而增大收集距离使复合纤维平均直径先降低后增加.展开更多
The in vitro degradation rate of polyanhydride （poly（sebacic acid）, diacetoxy terminated）, also known as PSADT, was investigated. PSADT tablets with a circular cross-section were formed using a compression molding...The in vitro degradation rate of polyanhydride （poly（sebacic acid）, diacetoxy terminated）, also known as PSADT, was investigated. PSADT tablets with a circular cross-section were formed using a compression molding device, and then immersed into phosphate buffer saline （PBS） for in vitro degradation experiments. The mechanisms of degradation and the degradation rate were characterized by the change in molecular weight and reduction in specimen mass. In addition, the effects of processing temperature and the geometry of the formed PSADT tablets on the rate of degradation were studied. The surface morphology at different degradation times was observed by scanning electron microscopy （SEM）. The experimental results showed that PSADT exhibited sur^hce erosion due to the fact that near zero-order degradation kinetics was observed during its degradation process. Moreover, it is found that the geometry of tablets played an important role on the rate of degradation, while the processing temperature had no significant effect on the PSADT degradation rate.展开更多
In the micro-molding of component with a micro-sized channel, the ability for polymer melt to flowing into the micro-channel in a macro-sized part is a big challenge. The multidimensional flow behaviors are included i...In the micro-molding of component with a micro-sized channel, the ability for polymer melt to flowing into the micro-channel in a macro-sized part is a big challenge. The multidimensional flow behaviors are included in the injection molding the macro-component with a micro-channel. In this case, a simplified model is used to analyze the flow behaviors of the macro-sized part within a micro-channel. The flow behaviors in the macro-cavity are estimated by using the finite element and finite difference methods. The influence of the injection rate, micro-channel size, heat transfer coefficient, and mold temperature on the flowing distance is investigated based on the non-isothermal analytic method. The results show that an increase in the radius of the micro-channel and mold temperature can improve effectively the flowing distance in the micro-channel.展开更多
文摘采用同轴静电纺丝技术制备聚乳酸(PLA)-聚己内酯(PCL)核-壳结构复合纤维.利用扫描电子显微镜(SEM)观察纺丝电压、收集距离和核层-壳层溶液推进速度对PLA-PCL核-壳结构复合纤维形貌的影响.通过透射扫描电子显微镜(TEM)分析核层-壳层溶液推进速度对PLA-PCL核-壳结构形成的影响.研究结果表明:当核-壳溶液推进速度为0.1-0.2和0.1-0.3 m L/h时形成了清晰的核-壳结构;随着壳层溶液推进速度加快,PLA-PCL复合纤维核层含量降低,增加纺丝电压能够有效地降低复合纤维平均直径,而增大收集距离使复合纤维平均直径先降低后增加.
基金Funded by the China Scholarship Council and Wisconsin Institute for Discovery(WID)the Scientific Research Staring Foundation,Fujian University of Technology,China(No.GY-Z13028)+1 种基金the Programfor New Century Excellent Talents in Fujian Province University(NCETFJ-2010)the Research Fund for Fujian Provincial University(JK-2010038)
文摘The in vitro degradation rate of polyanhydride （poly（sebacic acid）, diacetoxy terminated）, also known as PSADT, was investigated. PSADT tablets with a circular cross-section were formed using a compression molding device, and then immersed into phosphate buffer saline （PBS） for in vitro degradation experiments. The mechanisms of degradation and the degradation rate were characterized by the change in molecular weight and reduction in specimen mass. In addition, the effects of processing temperature and the geometry of the formed PSADT tablets on the rate of degradation were studied. The surface morphology at different degradation times was observed by scanning electron microscopy （SEM）. The experimental results showed that PSADT exhibited sur^hce erosion due to the fact that near zero-order degradation kinetics was observed during its degradation process. Moreover, it is found that the geometry of tablets played an important role on the rate of degradation, while the processing temperature had no significant effect on the PSADT degradation rate.
基金Project supported by the National Natural Science Foundation of China(Nos.51303027 and 11172271)the Scientific Research Staring Foundation,Fujian University of Technology of China(No.GY-Z13028)+1 种基金the Research Fund of Fujian Education Department(No.JA11189)the Research Fund for Enterprise Technology Innovation(No.2011-702-04)
文摘In the micro-molding of component with a micro-sized channel, the ability for polymer melt to flowing into the micro-channel in a macro-sized part is a big challenge. The multidimensional flow behaviors are included in the injection molding the macro-component with a micro-channel. In this case, a simplified model is used to analyze the flow behaviors of the macro-sized part within a micro-channel. The flow behaviors in the macro-cavity are estimated by using the finite element and finite difference methods. The influence of the injection rate, micro-channel size, heat transfer coefficient, and mold temperature on the flowing distance is investigated based on the non-isothermal analytic method. The results show that an increase in the radius of the micro-channel and mold temperature can improve effectively the flowing distance in the micro-channel.
