The current crustal horizontal strain field is given in the paper based on the horizontal movement rates obtained from about 400 GPS stations located in Chinese mainland and its surrounding areas. The results show: a)...The current crustal horizontal strain field is given in the paper based on the horizontal movement rates obtained from about 400 GPS stations located in Chinese mainland and its surrounding areas. The results show: a) The horizontal strain in Chinese mainland is strong in the west and weak in the east and the shear strain is larger than the normal strain (absolute magnitude). The general strain magnitude is 10-8/a and in local regions is 10-7/a, but the strain distribution is not homogeneous; b) The regions with the most significant NS-trending strains are the Himalayas belt along the western segment of Chinese southern boundary, the segment of 36N~42N along the western boundary and the northern margin of Qaidam block; c) The EW-trending strain variation along the western margin is the maximum and it is characterized by the alternatively positive and negative variations from the west to the east; d) The regions with larger magnitudes of REN (NE-trending shear strain) and Rmax (maximum shear strain) are Himalayas belt, the segment of 36N~42N along the western boundary, the western part of Qaidam block, Sichuan-Yunnan (Chuan-Dian) rhombic block and the border area of Alxa, Qilian and Tarim blocks; e) The surrounding area of Qinghai-Xizang (Qingzang) block is mainly superfacial contraction and its interior is basically superfacial expansion. The area to its north is mainly superfacial contraction with the maximum magnitude along the western boundary and the minimum magnitude in the eastern part (except Yanshan tectonic zone); f) In the west of the western part, the principal compressive strain is in the SN direction and the principal tensile strain is in the EW direction, while in the eastern margin area of the western part, the principal compressive strain is proximate EW and the principal tensile strain is about SN. The principal strain direction of Chuan-Dian rhombic block has changed greatly. In the northern part, it is compression in the EW and tension in the SN, while in the southern part, it is just the opposite; g) The strain pattern in Chinese mainland might be the integration of block mode and successive deformation mode. In addition, the shear strain might be the small-scale dominant strain. Such a result might be resulted from the collision of Indian plate and the boundaries coupling, and it is also closely related to the motion of deep-seated matters and the physical nature of crustal medium. Therefore, it should be noted that since the GPS stations are not homogenous in spatial distribution, the obtained strain fields and the scales of the strain should be different.展开更多
In this paper,the data of vertical crustal deformations associated with the Xingtai,Haicheng,Tangshan and Datong strong earthquakes in North China Block have been processed,analyzed and studied.The result shows that t...In this paper,the data of vertical crustal deformations associated with the Xingtai,Haicheng,Tangshan and Datong strong earthquakes in North China Block have been processed,analyzed and studied.The result shows that the seismogenic processes of strong earthquakes are accompanied by an evolution of crustal deformation as follows: ① The area of crustal deformation anomaly should be large in radius and extensive in range. ② There are both the 'field' and 'source' of crustal deformation anomaly,with the 'source' existing inside the'field' but differing from the 'field' distinctly. ③ The evolution process includes a number of steps.Firstly, movements in the 'field region transform from the normal state to an anomalous state to start the formation of field precursors.Secondly,movements in the 'source' region become outstandingly remarkable. Thirdly,anomalies in the 'field' region that surrounds the 'source' become increasingly intense.Fourthly,the 'source' region enters a state of immobilized-movement.Finally,an earthquake occurs. ④ There are usually one or more areas where the anomaly field forms a special pattern,mostly a four-quadrant distribution.The area which is'activated' first but becomes 'immobilized' afterwards often coincides with the source area.⑤ The appearance of an obviously immobilized area inside the obviously activated area is a precursory feature which suggests that an earthquake is impending.⑥ The longer the duration of immobilized-movement,the higher the magnitude of earthquake would be.The above might be the basic mode of vertical crustal deformation during the seismogenic process of strong intraplate earthquakes.展开更多
基金State Key Basic Research Development and Programming Project (G1998040703) the Project Physical Basic Study on Short-term Prediction for Strong Earthquakes during the tenth Five-Year Plan from Scientific and Technological Ministry.
文摘The current crustal horizontal strain field is given in the paper based on the horizontal movement rates obtained from about 400 GPS stations located in Chinese mainland and its surrounding areas. The results show: a) The horizontal strain in Chinese mainland is strong in the west and weak in the east and the shear strain is larger than the normal strain (absolute magnitude). The general strain magnitude is 10-8/a and in local regions is 10-7/a, but the strain distribution is not homogeneous; b) The regions with the most significant NS-trending strains are the Himalayas belt along the western segment of Chinese southern boundary, the segment of 36N~42N along the western boundary and the northern margin of Qaidam block; c) The EW-trending strain variation along the western margin is the maximum and it is characterized by the alternatively positive and negative variations from the west to the east; d) The regions with larger magnitudes of REN (NE-trending shear strain) and Rmax (maximum shear strain) are Himalayas belt, the segment of 36N~42N along the western boundary, the western part of Qaidam block, Sichuan-Yunnan (Chuan-Dian) rhombic block and the border area of Alxa, Qilian and Tarim blocks; e) The surrounding area of Qinghai-Xizang (Qingzang) block is mainly superfacial contraction and its interior is basically superfacial expansion. The area to its north is mainly superfacial contraction with the maximum magnitude along the western boundary and the minimum magnitude in the eastern part (except Yanshan tectonic zone); f) In the west of the western part, the principal compressive strain is in the SN direction and the principal tensile strain is in the EW direction, while in the eastern margin area of the western part, the principal compressive strain is proximate EW and the principal tensile strain is about SN. The principal strain direction of Chuan-Dian rhombic block has changed greatly. In the northern part, it is compression in the EW and tension in the SN, while in the southern part, it is just the opposite; g) The strain pattern in Chinese mainland might be the integration of block mode and successive deformation mode. In addition, the shear strain might be the small-scale dominant strain. Such a result might be resulted from the collision of Indian plate and the boundaries coupling, and it is also closely related to the motion of deep-seated matters and the physical nature of crustal medium. Therefore, it should be noted that since the GPS stations are not homogenous in spatial distribution, the obtained strain fields and the scales of the strain should be different.
文摘In this paper,the data of vertical crustal deformations associated with the Xingtai,Haicheng,Tangshan and Datong strong earthquakes in North China Block have been processed,analyzed and studied.The result shows that the seismogenic processes of strong earthquakes are accompanied by an evolution of crustal deformation as follows: ① The area of crustal deformation anomaly should be large in radius and extensive in range. ② There are both the 'field' and 'source' of crustal deformation anomaly,with the 'source' existing inside the'field' but differing from the 'field' distinctly. ③ The evolution process includes a number of steps.Firstly, movements in the 'field region transform from the normal state to an anomalous state to start the formation of field precursors.Secondly,movements in the 'source' region become outstandingly remarkable. Thirdly,anomalies in the 'field' region that surrounds the 'source' become increasingly intense.Fourthly,the 'source' region enters a state of immobilized-movement.Finally,an earthquake occurs. ④ There are usually one or more areas where the anomaly field forms a special pattern,mostly a four-quadrant distribution.The area which is'activated' first but becomes 'immobilized' afterwards often coincides with the source area.⑤ The appearance of an obviously immobilized area inside the obviously activated area is a precursory feature which suggests that an earthquake is impending.⑥ The longer the duration of immobilized-movement,the higher the magnitude of earthquake would be.The above might be the basic mode of vertical crustal deformation during the seismogenic process of strong intraplate earthquakes.
