As a traditional n-type semiconductor, TiO_(2)has good UV absorption ability and stable physical and chemical properties. However, its wide band gap and low oxygen evolution reaction(OER) activity limit its applicatio...As a traditional n-type semiconductor, TiO_(2)has good UV absorption ability and stable physical and chemical properties. However, its wide band gap and low oxygen evolution reaction(OER) activity limit its application in the field of photoelectrochemical(PEC) water splitting. In this work, a type-Ⅱ TiO2/CuNi2S4heterojunction photoanode is successfully constructed, which expanded the light absorption range to visible and enhanced the OER activity. Firstly, TiO2nanotubes(NTs) thin films are prepared on Ti substrates by two-step anodization, and then the bi-functional electrocatalytic material CuNi2S4is grown on TiO2NTs in the shape of nanosheets(NSs) in situ by solvothermal method. As a bi-functional electrocatalytic material, CuNi2S4has good visible light absorption property as well as OER catalytic activity. Compared with TiO_(2), the IPCE value of TiO_(2)/CuNi_(2)S_(4)is 2.59% at 635 nm, and that of TiO2is a mere 0.002%.The separation efficiency and injection efficiency increase from 2.49% and 31.52% to 3.61% and 87.77%, respectively. At 1.23 V vs. RHE, the maximum photocurrent density is 0.26 m A/cm^(2), which is 2.6 times than that of TiO2(0.11 m A/cm^(2)),and can be maintained at 0.25 m A/cm^(2)for at least 2 h under light illumination. Moreover, a hydrogen production rate of 4.21 μmol·cm^(-2)·h^(-1)is achieved within 2 h. This work provides a new idea for the application of TiO_(2)in the field of PEC water splitting and the construction of efficient and stable photoelectronic devices.展开更多
The up-conversion luminescence composite NaYF4：Er3＋/TiO2 is prepared using the sol-gel method. The specimen has good crystallinity and two shapes, i.e., viereck and round, while the sizes of viereck and round partic...The up-conversion luminescence composite NaYF4：Er3＋/TiO2 is prepared using the sol-gel method. The specimen has good crystallinity and two shapes, i.e., viereck and round, while the sizes of viereck and round particles are both micron-sized. The TiO2 has an anatase structure, while the NaYF4 has a hexagonal phase, which can be hardly obtained through the common sol-gel method. Due to the big particle size and the high crystallinity of pure NaYF4： Er3＋, the composite has a small specific surface area that is less than Degussa P25 TiO2. The NaYF4：Er3＋/TiO2 composite shows several emission peaks at 211, 237, and 251 nm under the excitation of 388 nm, at 395 nm and 411 nm under the excitation of 500 nm, and at 467, 481,492, and 508 nm under the excitation of 570 nm.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 11974276 and 11804274)the Natural Science Foundation of Shaanxi Province of China (Grant No. 2023-JC-YB-139)+1 种基金the Open Research Fund of State Key Laboratory of Transient Optics and Photonicsthe Chinese Academy of Sciences (Grant No. SKLST202211)。
文摘As a traditional n-type semiconductor, TiO_(2)has good UV absorption ability and stable physical and chemical properties. However, its wide band gap and low oxygen evolution reaction(OER) activity limit its application in the field of photoelectrochemical(PEC) water splitting. In this work, a type-Ⅱ TiO2/CuNi2S4heterojunction photoanode is successfully constructed, which expanded the light absorption range to visible and enhanced the OER activity. Firstly, TiO2nanotubes(NTs) thin films are prepared on Ti substrates by two-step anodization, and then the bi-functional electrocatalytic material CuNi2S4is grown on TiO2NTs in the shape of nanosheets(NSs) in situ by solvothermal method. As a bi-functional electrocatalytic material, CuNi2S4has good visible light absorption property as well as OER catalytic activity. Compared with TiO_(2), the IPCE value of TiO_(2)/CuNi_(2)S_(4)is 2.59% at 635 nm, and that of TiO2is a mere 0.002%.The separation efficiency and injection efficiency increase from 2.49% and 31.52% to 3.61% and 87.77%, respectively. At 1.23 V vs. RHE, the maximum photocurrent density is 0.26 m A/cm^(2), which is 2.6 times than that of TiO2(0.11 m A/cm^(2)),and can be maintained at 0.25 m A/cm^(2)for at least 2 h under light illumination. Moreover, a hydrogen production rate of 4.21 μmol·cm^(-2)·h^(-1)is achieved within 2 h. This work provides a new idea for the application of TiO_(2)in the field of PEC water splitting and the construction of efficient and stable photoelectronic devices.
基金Project supported by the National Natural Science Foundation of China (Grant No. 20876125)the Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20096101110013)the Northwest University Graduate Cross-Discipline Funds (Grant Nos. 09YJC27,09YJC24,and 201031)
文摘The up-conversion luminescence composite NaYF4：Er3＋/TiO2 is prepared using the sol-gel method. The specimen has good crystallinity and two shapes, i.e., viereck and round, while the sizes of viereck and round particles are both micron-sized. The TiO2 has an anatase structure, while the NaYF4 has a hexagonal phase, which can be hardly obtained through the common sol-gel method. Due to the big particle size and the high crystallinity of pure NaYF4： Er3＋, the composite has a small specific surface area that is less than Degussa P25 TiO2. The NaYF4：Er3＋/TiO2 composite shows several emission peaks at 211, 237, and 251 nm under the excitation of 388 nm, at 395 nm and 411 nm under the excitation of 500 nm, and at 467, 481,492, and 508 nm under the excitation of 570 nm.
