烟颗粒粒径分布和浓度变化是探测香烟阴燃火灾初期的重要参数,研究香烟阴燃过程烟颗粒粒谱分布对火灾探测具有指导意义。实验通过在室内有风条件下展开,研究风速、位置、时间、烟源等因素对烟颗粒的粒径分布和形成规律的影响。结果表明:...烟颗粒粒径分布和浓度变化是探测香烟阴燃火灾初期的重要参数,研究香烟阴燃过程烟颗粒粒谱分布对火灾探测具有指导意义。实验通过在室内有风条件下展开,研究风速、位置、时间、烟源等因素对烟颗粒的粒径分布和形成规律的影响。结果表明:1随着时间的推移,GMD(Geometric Mean Diameter,几何平均直径)变大,烟颗粒数量浓度增加,但粒谱分布逐渐趋于稳定。2风速对颗粒粒谱形成的影响较为复杂,随着风速的增加,气流扰动加剧,烟颗粒浓度增加,GMD有减小的变化趋势。3在不同的位置,有风条件下烟颗粒随着气流迁移,最终在壁面处进行积累,离烟源越远位置,沿着风速方向浓度和GMD均变大。4烟颗粒的初始浓度也影响烟颗粒粒谱分布和运动特征,烟源数量越多,初始浓度越大,形成的烟颗粒浓度和GMD越大。展开更多
Selecting the remanufacturing system as object of the study, the buffer capacity is served as control variable, and design of experiment(DOE) and simulation are used to analyze the effect that uncertain quality of ret...Selecting the remanufacturing system as object of the study, the buffer capacity is served as control variable, and design of experiment(DOE) and simulation are used to analyze the effect that uncertain quality of returns acts on system performance. The remanufacturing time and the recovery rate in each station are used to represent the quality level of the returns, and the variance of remanufacturing time is used to denote the variability of returns’ quality. Three factors(the variability, the proportion and the recovery rate) of different quality levels in returns are considered. By analyzing the variance and the range of the simulation results, some important conclusions are obtained: recovery rate affects the remanufacturing cost by far, and the variability has the minimum influence;furthermore, for the returns, the more obvious of the dispersion degree, the higher proportion of the high-level quality, and the higher of the recovery rate, the lower the cost of remanufacturing will be.展开更多
文摘烟颗粒粒径分布和浓度变化是探测香烟阴燃火灾初期的重要参数,研究香烟阴燃过程烟颗粒粒谱分布对火灾探测具有指导意义。实验通过在室内有风条件下展开,研究风速、位置、时间、烟源等因素对烟颗粒的粒径分布和形成规律的影响。结果表明:1随着时间的推移,GMD(Geometric Mean Diameter,几何平均直径)变大,烟颗粒数量浓度增加,但粒谱分布逐渐趋于稳定。2风速对颗粒粒谱形成的影响较为复杂,随着风速的增加,气流扰动加剧,烟颗粒浓度增加,GMD有减小的变化趋势。3在不同的位置,有风条件下烟颗粒随着气流迁移,最终在壁面处进行积累,离烟源越远位置,沿着风速方向浓度和GMD均变大。4烟颗粒的初始浓度也影响烟颗粒粒谱分布和运动特征,烟源数量越多,初始浓度越大,形成的烟颗粒浓度和GMD越大。
基金the National Natural Science Foundation of China(No.51565028)the Innovation and Entrepreneurship Talents Training Project of Lanzhou City(No.2018-RC-25)
文摘Selecting the remanufacturing system as object of the study, the buffer capacity is served as control variable, and design of experiment(DOE) and simulation are used to analyze the effect that uncertain quality of returns acts on system performance. The remanufacturing time and the recovery rate in each station are used to represent the quality level of the returns, and the variance of remanufacturing time is used to denote the variability of returns’ quality. Three factors(the variability, the proportion and the recovery rate) of different quality levels in returns are considered. By analyzing the variance and the range of the simulation results, some important conclusions are obtained: recovery rate affects the remanufacturing cost by far, and the variability has the minimum influence;furthermore, for the returns, the more obvious of the dispersion degree, the higher proportion of the high-level quality, and the higher of the recovery rate, the lower the cost of remanufacturing will be.
