期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
桥梁钢管疲劳试验
1
作者 徐兆雄 《理化检验(物理分册)》 CAS 2001年第10期434-434,437,共2页
介绍了对专用一级公路上的桥梁钢管进行疲劳试验 。
关键词 疲劳试验 喷铝层 探伤 桥梁 钢管 安全性 可靠性
下载PDF
Ramberg-Osgood形幂硬化材料的硬化系数及硬化指数的确定 被引量:13
2
作者 谢奇 吕运冰 徐兆雄 《武汉交通科技大学学报》 1996年第3期319-322,共4页
应用显微测量技术及对数应变的计算方法,测出了16Mn钢的硬化系数及硬化指数,为该材料裂纹尖端附近应力、应变场的理论计算提供必要的参数.
关键词 力学性质 硬化系数 硬化指数 幂硬化材料
下载PDF
水泥球磨机筒体疲劳强度探讨
3
作者 董国兴 李远善 +2 位作者 吕运冰 徐兆雄 李永信 《武汉交通科技大学学报》 1998年第4期391-395,共5页
对球磨机筒体的4种情况的焊件进行残余应力测试,并对进行热处理和未进行热处理的试件做疲劳试验及疲劳裂纹扩展测试.试验结果表明:经过热处理的试件,残余应力降低,疲劳强度提高,裂纹扩展速率降低,结构抗疲劳性能增强.不过从工... 对球磨机筒体的4种情况的焊件进行残余应力测试,并对进行热处理和未进行热处理的试件做疲劳试验及疲劳裂纹扩展测试.试验结果表明:经过热处理的试件,残余应力降低,疲劳强度提高,裂纹扩展速率降低,结构抗疲劳性能增强.不过从工程应用角度看,对于板厚为20~25mm的球磨机筒体而言,不进行焊后热处理也能保证足够的疲劳强度. 展开更多
关键词 残余应力 裂纹扩展 水泥 疲劳强度 球磨机 筒体
下载PDF
JQ130架桥机机臂火焰矫形后的残余应力分析 被引量:1
4
作者 董国兴 黄豪 +1 位作者 徐兆雄 李永信 《武汉交通科技大学学报》 1994年第3期264-268,共5页
通过对JQ130架桥机机臂火焰矫形后的残余应力的测试及分析,归纳出其残余应力的有关规律,并分析了残余应力对机臂强度的影响,为架桥机的性能论证提供了有效的借鉴.
关键词 残余应力 箱形梁 架桥机 火焰矫形
下载PDF
BIOMECHANICAL STUDY ON UNILATERAL SINGLE-PLANE EXTERNAL FIXER 被引量:1
5
作者 刘国平 杜靖远 徐兆雄 《Chinese Medical Sciences Journal》 CAS CSCD 1995年第4期226-228,共3页
Six tibias removed from 30-40 years old males, who died in an accident for in less than 12 hours, were osteotomized at one-third supra-medium segment. They were fixed by an unilateral adjustable external fixer (UAEF),... Six tibias removed from 30-40 years old males, who died in an accident for in less than 12 hours, were osteotomized at one-third supra-medium segment. They were fixed by an unilateral adjustable external fixer (UAEF), to be used as a model of external fixation of tibial fracture (MEFTF). The compression. tension, torsion, antero-posterior and lateral bending strength, and the strength for vertically extracting the pins from the tibia were determined in the MEFTF. Within a certain range of load, the correlation of strain to stress was basically a linear relationship. These data provide a theoretical basis of biomechanics for the improvement of UAEF and for early exercises of fracture patients, such as extend-bending of the joint.raising the limb and walking with a walking stick. 展开更多
关键词 TIBIA external fixator BIOMECHANICS
下载PDF
Biomechanical Study on Osteotomized Tibias Fixed with Unilateral Adjustable External Fixator
6
作者 刘国平 杜靖远 +2 位作者 王洪 陈汝轻 徐兆雄 《Journal of Huazhong University of Science and Technology(Medical Sciences)》 SCIE CAS 1995年第4期242-245,248,共5页
Five fresh tibias removed from 30-40 years old dead males were osteotomized at one-third supra-medium segment and then fixed by an unilateral adjustable external fixator (UAEF) to be used as a model of external fixati... Five fresh tibias removed from 30-40 years old dead males were osteotomized at one-third supra-medium segment and then fixed by an unilateral adjustable external fixator (UAEF) to be used as a model of external fixation of tibial fracture. For each loading test under different configurations of UAEF, the ratio of the force-displacement was used to determine its stiffness value. The weakest mode of the UAEF device is in AP bending. Under each mode of compression,distraction , anteroposterial and lateral bending and torsion loading , increasing the pin number or pin diameter or pin separation, and/or reduction of pin group separation can significantly increase the stiffness values of UAEF (P<0.01). These data revealed that UAEF is suitable for the external fixation of tibial fracture. 展开更多
关键词 TIBIA external fixator BIOMECHANICS
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部