期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
汽油机铝合金缸孔等离子喷涂摩擦学性能研究 被引量:2
1
作者 戴基卉 姜钰 尹琪 《汽车与新动力》 2022年第1期75-78,共4页
在汽油机铝合金缸体内孔表面,采用大气等离子喷涂(APS)方法制备了1层厚度为150μm左右的铁基涂层来替代传统的铸铁缸套。对缸孔的涂层进行表征,并对缸孔-活塞环摩擦副进行了摩擦试验。试验表明,在铝合金缸孔喷涂等离子铁基涂层,可提高... 在汽油机铝合金缸体内孔表面,采用大气等离子喷涂(APS)方法制备了1层厚度为150μm左右的铁基涂层来替代传统的铸铁缸套。对缸孔的涂层进行表征,并对缸孔-活塞环摩擦副进行了摩擦试验。试验表明,在铝合金缸孔喷涂等离子铁基涂层,可提高缸孔的硬度,并提高发动机的耐久性和抗拉缸性,使发动机实现轻量化目标。涂层表面精度接近镜面级别,且涂层内含有孔隙,可降低缸孔-活塞组的摩擦系数及摩擦损失,提高发动机燃油经济性。 展开更多
关键词 汽油机缸体 铝合金缸孔 大气等离子喷涂 等离子铁基涂层
下载PDF
Dry Sliding Wear Behavior of Silver Containing Ni-Based Composite-Steel Tribo-Pair
2
作者 RAJNESH Tyagi 熊党生 +1 位作者 李建亮 戴基卉 《Journal of Shanghai Jiaotong university(Science)》 EI 2012年第4期470-474,共5页
Ni-based self lubricating composites containing four different amounts of silver were prepared by powder metallurgy(PM) route.The room temperature friction and wear behavior was investigated by carrying out dry slidin... Ni-based self lubricating composites containing four different amounts of silver were prepared by powder metallurgy(PM) route.The room temperature friction and wear behavior was investigated by carrying out dry sliding experiments against bearing steel using a ring-on-disk configuration.Tests were conducted at a constant load of 100 N and different sliding speeds of 0.5,1.0 and 1.5 m/s to analyze the effect of both the speed and the silver content on the wear behavior of the tribo-pair.The friction coefficient and the wear rate of the composites were found to decrease with increasing both the sliding speed and the silver content.The wear rate of the counterface was observed to be a little higher when it was siding against the composite having silver in comparison to that without any silver.However,the overall wear rate of the tribo-pair was found to decrease with increasing sliding speed and silver content. 展开更多
关键词 Ni-based composites solid lubricants silver lubrication sliding wear self lubrication non-ferrous materials
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部