A series of Si-containing polyester-polyether multiblock copolymers were synthesizedby transesterification and melt copolycondensation of organosilicon monomers [1, 1, 3, 3-tetramethyl-1, 3-bis (p-carbomethoxyphenyl...A series of Si-containing polyester-polyether multiblock copolymers were synthesizedby transesterification and melt copolycondensation of organosilicon monomers [1, 1, 3, 3-tetramethyl-1, 3-bis (p-carbomethoxyphenyl) disiloxane] (I ) or dimethyl bis (p-carbometh-oxyphenyl) silane] (II) and dimethyl terephthalate (DMT), with 1, 4-butanediol, poly-tetramethylene glycol (PTMG) respectively. The organosilicon monomers were preparedby Grinard reaction, oxidation and esterification. The structures of the above monomers(I), (II) and the copolymers were characterized by MS anal. and;H-NMR.展开更多
Some physical properties of the polyester-polyeher multiblock copolymers with Si-containing hard segment were further examined by a series of physical methods. Thehydrophobicity of the copolymers was improved with the...Some physical properties of the polyester-polyeher multiblock copolymers with Si-containing hard segment were further examined by a series of physical methods. Thehydrophobicity of the copolymers was improved with the incorporation of increasing amountof organosilicone, XPS test proved that silicon element was enriched at the surface of theSi-containing polyeser-polyether copolymers. It was also found that their heat resistanceand gas permeability for O_2 and N_2 were greatly improved. The study on semipermeabilityof films made of the Si-containing copolymers was also followed with interest.展开更多
Poly(butylene terephthalate)-b-poly(tetramethylene glycol) (PBT-b-PTMG) was used as rheology modifier for the epoxy resin. The segmental copolymer formed spherulites in the epoxy medium. This copolymer was very effect...Poly(butylene terephthalate)-b-poly(tetramethylene glycol) (PBT-b-PTMG) was used as rheology modifier for the epoxy resin. The segmental copolymer formed spherulites in the epoxy medium. This copolymer was very effective in endowing yield stresses to the liquid resin. The PTMG segment brought in a lowering of the dissolution temperature of the spherulites in the epoxy gel. The cured resin with PBT-b-PTMG as modifier was two-phase materials. The rheology modifier improved the mechanical properties of the cured resin as well. The flexible PTMG segments, however, were not in favour of the toughening effect of the modifier. This was attributed to the large domain size of the dispersed phase.展开更多
文摘A series of Si-containing polyester-polyether multiblock copolymers were synthesizedby transesterification and melt copolycondensation of organosilicon monomers [1, 1, 3, 3-tetramethyl-1, 3-bis (p-carbomethoxyphenyl) disiloxane] (I ) or dimethyl bis (p-carbometh-oxyphenyl) silane] (II) and dimethyl terephthalate (DMT), with 1, 4-butanediol, poly-tetramethylene glycol (PTMG) respectively. The organosilicon monomers were preparedby Grinard reaction, oxidation and esterification. The structures of the above monomers(I), (II) and the copolymers were characterized by MS anal. and;H-NMR.
文摘Some physical properties of the polyester-polyeher multiblock copolymers with Si-containing hard segment were further examined by a series of physical methods. Thehydrophobicity of the copolymers was improved with the incorporation of increasing amountof organosilicone, XPS test proved that silicon element was enriched at the surface of theSi-containing polyeser-polyether copolymers. It was also found that their heat resistanceand gas permeability for O_2 and N_2 were greatly improved. The study on semipermeabilityof films made of the Si-containing copolymers was also followed with interest.
基金The project is supported by Ford-China Research and Development Fund.
文摘Poly(butylene terephthalate)-b-poly(tetramethylene glycol) (PBT-b-PTMG) was used as rheology modifier for the epoxy resin. The segmental copolymer formed spherulites in the epoxy medium. This copolymer was very effective in endowing yield stresses to the liquid resin. The PTMG segment brought in a lowering of the dissolution temperature of the spherulites in the epoxy gel. The cured resin with PBT-b-PTMG as modifier was two-phase materials. The rheology modifier improved the mechanical properties of the cured resin as well. The flexible PTMG segments, however, were not in favour of the toughening effect of the modifier. This was attributed to the large domain size of the dispersed phase.