Tritium self-sufficiency in future deuterium–tritium fusion reactors is a crucial challenge.As an engineering test reactor,the China Fusion Engineering Test Reactor requires a burning fraction of 3%for the goal to te...Tritium self-sufficiency in future deuterium–tritium fusion reactors is a crucial challenge.As an engineering test reactor,the China Fusion Engineering Test Reactor requires a burning fraction of 3%for the goal to test the accessibility to the future fusion plant.To self-consistently simulate burning plasmas with profile changes in pellet injection scenarios and to estimate the corresponding burning fraction,a one-dimensional multi-species radial transport model is developed in the BOUT++framework.Several pellet-fueling scenarios are then tested in the model.The results show that the increased fueling depth improves the burning fraction by particle confinement improvement and fusion power increase.Nevertheless,by increasing the depth,the pellet cooling-down may significantly lower the temperature in the core region.Taking the density perturbation into consideration,the reasonable parameters of the fueling scenario in these simulations are estimated as pellet radius r_(p)=3 mm,injection rate=4 Hz,and pellet injection velocity=1000–2000 m s^(-1) without drift or 450 m s^(-1) with high-field-side drift.展开更多
基金supported by National Natural Science Foundation of China(Nos.11975087 and 41674165)the National Key Research and Development Program of China(Nos.2017YFE0300501 and 2018YFE030310)。
文摘Tritium self-sufficiency in future deuterium–tritium fusion reactors is a crucial challenge.As an engineering test reactor,the China Fusion Engineering Test Reactor requires a burning fraction of 3%for the goal to test the accessibility to the future fusion plant.To self-consistently simulate burning plasmas with profile changes in pellet injection scenarios and to estimate the corresponding burning fraction,a one-dimensional multi-species radial transport model is developed in the BOUT++framework.Several pellet-fueling scenarios are then tested in the model.The results show that the increased fueling depth improves the burning fraction by particle confinement improvement and fusion power increase.Nevertheless,by increasing the depth,the pellet cooling-down may significantly lower the temperature in the core region.Taking the density perturbation into consideration,the reasonable parameters of the fueling scenario in these simulations are estimated as pellet radius r_(p)=3 mm,injection rate=4 Hz,and pellet injection velocity=1000–2000 m s^(-1) without drift or 450 m s^(-1) with high-field-side drift.