期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
重庆工学院2校区水质检测报告 被引量:3
1
作者 张晓凤 刘鉴锋 +4 位作者 刘建平 王国连 李汉超 潜美丽 钟福华 《重庆工学院学报(自然科学版)》 2008年第1期168-172,共5页
对重庆工学院两校区饮用水及其水体中心水质主要指标(化学耗氧量CODcr、硬度、总盐量、pH值、固含量、总碱度)进行了测定.结果表明:老校区饮用水各项指标均符合饮用水标准,新校区饮用水除CODcr稍超标外,其它指标均符合饮用水标准;根据《... 对重庆工学院两校区饮用水及其水体中心水质主要指标(化学耗氧量CODcr、硬度、总盐量、pH值、固含量、总碱度)进行了测定.结果表明:老校区饮用水各项指标均符合饮用水标准,新校区饮用水除CODcr稍超标外,其它指标均符合饮用水标准;根据《GB3838-2002地表水环境质量标准》,新校区水体中心水质属于Ⅲ类水. 展开更多
关键词 饮用水 地表水 卫生标准
下载PDF
80t EBT+120t LF+VD生产车轮轮坯的研究及应用 被引量:1
2
作者 李秋兰 陈培红 +1 位作者 潜美丽 许益华 《大型铸锻件》 2016年第1期47-48,共2页
采取专用冶炼浇注工艺及特殊浇注方式,实现用80 t EBT+120 t LF+VD流程生产车轮轮坯,使用夹杂物包裹技术,使得轮坯质量优良,满足了国内外车轮轮坯的生产要求,为企业的转型发展奠定了基础。
关键词 EBT 夹杂物 车轮轮坯
下载PDF
新型钢锭模研究与运用 被引量:3
3
作者 陈培红 潜美丽 +4 位作者 靳鹏 许益华 王纪元 姚国平 张应山 《铸造设备与工艺》 2013年第4期37-39,57,共4页
根据钢锭模的设计理念,针对现有钢锭模生产的钢锭在生产34CrMolA时废品率高的问题,重新设计了下注三孔底盘钢锭模(三孔锭模)。运用计算机数值模拟软件,对新设计的三孔锭模进行了充型过程模拟,模拟结果显示三孔底盘钢锭模结构合理,在实... 根据钢锭模的设计理念,针对现有钢锭模生产的钢锭在生产34CrMolA时废品率高的问题,重新设计了下注三孔底盘钢锭模(三孔锭模)。运用计算机数值模拟软件,对新设计的三孔锭模进行了充型过程模拟,模拟结果显示三孔底盘钢锭模结构合理,在实际生产中三孔底盘的钢锭使34CrMo1A转子的废品率明显降低。 展开更多
关键词 三孔底盘 钢锭模 注速 计算机数值模拟
下载PDF
某车轮轮毂条状缺陷的原位统计分布分析
4
作者 刘强 楚雪峰 潜美丽 《山西冶金》 CAS 2022年第5期9-12,17,共5页
基于原位统计分布分析技术,利用金属原位分析仪对某车轮轮毂条状缺陷进行分析,并与火花直读光谱仪测得的结果进行比较;根据实验结果,研究缺陷所在区域的偏析和致密情况,并结合凝固理论分析缺陷产生的原因,为日后同类型的缺陷分析提供了... 基于原位统计分布分析技术,利用金属原位分析仪对某车轮轮毂条状缺陷进行分析,并与火花直读光谱仪测得的结果进行比较;根据实验结果,研究缺陷所在区域的偏析和致密情况,并结合凝固理论分析缺陷产生的原因,为日后同类型的缺陷分析提供了参考。 展开更多
关键词 原位统计分布分析 金属原位分析仪 偏析 致密 缺陷分析
下载PDF
Formation mechanism of micro emulsion on aluminum and lanthanum extraction in P507-HCl system 被引量:5
5
作者 吴文远 李冬 +5 位作者 赵志华 陈建立 张丰云 尹少华 潜美丽 边雪 《Journal of Rare Earths》 SCIE EI CAS CSCD 2010年第S1期174-178,共5页
P507 solvent extraction is the main method to separate and purify the rare earth products.The emulsification may be caused by the impurities in process of extracting rare earths,and these result in huge economic loss ... P507 solvent extraction is the main method to separate and purify the rare earth products.The emulsification may be caused by the impurities in process of extracting rare earths,and these result in huge economic loss and decrease the quality of rare earth products.In recent researches,the extractant was prone to emulsification,and aluminum content of rare earth products also increased,while aluminum concentration of feed was higher.Pointing to this problem,the structural change of saponification P507 extracting aluminum and lanthanum was investigated by infrared spectroscopy,and the results showed that Al ions exchanged with H of P-O-H to become P-O-Al.Because aluminum held the characteristic of hydrophilic after extracted in the form of hydroxyl polymer ions and this provided conditions for the formation of micro emulsion.The organic phase and aqueous phase were investigated by polarizing microscope after aluminum was extracted.The results showed that the organic phase was clear when the extraction capacity of Al was less than 5 g/L.If the extraction capacity of Al exceeded 5 g/L,it formed W/O of ME(micro emulsion),leading to form emulsion of the organic phase.When Al concentration of feed was less than 1 g/L,the aqueous phase would form O/W of ME.If aluminum was extracted by saponification P507 firstly,then the the organic phase loading aluminum extracted rare earth continually,the organic and aqueous phase formed emulsification easily. 展开更多
关键词 saponification P507 aluminum and rare earth extraction emulsification mechanis rare earths
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部