Nonpolar(11–20) a-plane p-type GaN films were successfully grown on r-plane sapphire substrate with the metal–organic chemical vapor deposition(MOCVD) system. The effects of Mg-doping temperature on the structural a...Nonpolar(11–20) a-plane p-type GaN films were successfully grown on r-plane sapphire substrate with the metal–organic chemical vapor deposition(MOCVD) system. The effects of Mg-doping temperature on the structural and electrical properties of nonpolar p-type GaN films were investigated in detail. It is found that all the surface morphology, crystalline quality, strains, and electrical properties of nonpolar a-plane p-type GaN films are interconnected, and are closely related to the Mg-doping temperature. This means that a proper performance of nonpolar p-type GaN can be expected by optimizing the Mg-doping temperature. In fact, a hole concentration of 1.3×10^(18)cm^(-3), a high Mg activation efficiency of 6.5%,an activation energy of 114 me V for Mg acceptor, and a low anisotropy of 8.3% in crystalline quality were achieved with a growth temperature of 990℃. This approach to optimizing the Mg-doping temperature of the nonpolar a-plane p-type GaN film provides an effective way to fabricate high-efficiency optoelectronic devices in the future.展开更多
Nonpolar(1120)plane In_(x)Ga_(1-x)N epilayers comprising the entire In content(x)range were successfully grown on nanoscale Ga N islands by metal-organic chemical vapor deposition.The structural and optical properties...Nonpolar(1120)plane In_(x)Ga_(1-x)N epilayers comprising the entire In content(x)range were successfully grown on nanoscale Ga N islands by metal-organic chemical vapor deposition.The structural and optical properties were studied intensively.It was found that the surface morphology was gradually smoothed when x increased from 0.06 to 0.33,even though the crystalline quality was gradually declined,which was accompanied by the appearance of phase separation in the In_(x)Ga_(1-x)N layer.Photoluminescence wavelengths of 478 and 674 nm for blue and red light were achieved for x varied from 0.06 to 0.33.Furthermore,the corresponding average lifetime(τ_(1/e))of carriers for the nonpolar In Ga N film was decreased from 406 ps to 267 ps,indicating that a high-speed modulation bandwidth can be expected for nonpolar In Ga N-based light-emitting diodes.Moreover,the bowing coefficient(b)of the(1120)plane In Ga N was determined to be 1.91 e V for the bandgap energy as a function of x.展开更多
AlGaN-based ultraviolet light-emitting diodes(UV-LEDs) have attracted considerable interest due to their wide range of application fields. However, they are still suffering from low light out power and unsatisfactory ...AlGaN-based ultraviolet light-emitting diodes(UV-LEDs) have attracted considerable interest due to their wide range of application fields. However, they are still suffering from low light out power and unsatisfactory quantum efficiency.The utilization of polarization-doped technique by grading the Al content in p-type layer has demonstrated its effectiveness in improving LED performances by providing sufficiently high hole concentration. However, too large degree of grading through monotonously increasing the Al content causes strains in active regions, which constrains application of this technique, especially for short wavelength UV-LEDs. To further improve 340-nm UV-LED performances, segmentally graded Al content p-Al_xGa_(1-x)N has been proposed and investigated in this work. Numerical results show that the internal quantum efficiency and output power of proposed structures are improved due to the enhanced carrier concentrations and radiative recombination rate in multiple quantum wells, compared to those of the conventional UV-LED with a stationary Al content AlGaN electron blocking layer. Moreover, by adopting the segmentally graded p-Al_xGa_(1-x)N, band bending within the last quantum barrier/p-type layer interface is effectively eliminated.展开更多
We investigate the performances of the near-ultraviolet（about 350 nm-360 nm） light-emitting diodes（LEDs） each with specifically designed irregular sawtooth electron blocking layer（EBL） by using the APSYS simulat...We investigate the performances of the near-ultraviolet（about 350 nm-360 nm） light-emitting diodes（LEDs） each with specifically designed irregular sawtooth electron blocking layer（EBL） by using the APSYS simulation program.The internal quantum efficiencies（IQEs）,light output powers,carrier concentrations in the quantum wells,energy-band diagrams,and electrostatic fields are analyzed carefully.The results indicate that the LEDs with composition-graded pAlxGa1-xN irregular sawtooth EBLs have better performances than their counterparts with stationary component p-AlGaN EBLs.The improvements can be attributed to the improved polarization field in EBL and active region as well as the alleviation of band bending in the EBL/p-AlGaN interface,which results in less electron leakage and better hole injection efficiency,thus reducing efficiency droop and enhancing the radiative recombination rate.展开更多
The anomalous hysteresis in a perovskite solar cell induced by an asymmetric field is confirmed by a capacitance–voltage measurement. By applying several cycles of alternating reverse and forward scans, this hysteres...The anomalous hysteresis in a perovskite solar cell induced by an asymmetric field is confirmed by a capacitance–voltage measurement. By applying several cycles of alternating reverse and forward scans, this hysteresis phenomenon is obviously alleviated, resulting in a hysteresis-less state in the perovskite solar cell. Meanwhile, the open-circuit voltage and power conversion efficiency of the perovskite solar cell are enhanced by 55.74% and 61.30%, respectively, while the current density and fill factor keep almost invariable. The operation of alleviating hysteresis is essential for further research and is likely to bring in performance gains.展开更多
A theoretical study of polar and semi/non-polar InGaN/GaN light-emitting diodes（LEDs） with different internal surface polarization charges, which can be grown on Si substrates, is conducted by using APSYS software. ...A theoretical study of polar and semi/non-polar InGaN/GaN light-emitting diodes（LEDs） with different internal surface polarization charges, which can be grown on Si substrates, is conducted by using APSYS software. In comparison with polar structure LEDs, the semi-polar structure exhibits a higher concentration of electrons and holes and radiative recombination rate, and its reduced built-in polarization field weakens the extent of band bending which causes the shift of peak emission wavelength. So the efficiency droop of semi-polar InGaN/GaN LEDs declines obviously and the optical power is significantly improved. In comparison with non-polar structure LEDs, although the concentration of holes and electrons as well as the radiative recombination rate of the semi-polar structure are better in the last two quantum wells（QWs） approaching the p-Ga N side, the uniformity of distribution of carriers and radiative recombination rate for the nonpolar structure is better. So the theoretical analysis indicates that the removal of the internal polarization field in the MQWs active regions for non-polar structure LEDs contributes to the uniform distribution of electrons and holes, and decreases the electron leakage. Thus it enhances the radiative recombination rate, and further improves the IQEs and optical powers, and shows the best photoelectric properties among these three structures.展开更多
基金Project supported by the National Key Research and Development Program of China (Grant Nos.2021YFB3601000 and 2021YFB3601002)the National Natural Science Foundation of China (Grant Nos.62074077,61921005,61974062,62204121,and 61904082)+1 种基金Leading-edge Technology Program of Jiangsu Natural Science Foundation (Grant No.BE2021008-2)the China Postdoctoral Science Foundation (Grant No.2020M671441)。
文摘Nonpolar(11–20) a-plane p-type GaN films were successfully grown on r-plane sapphire substrate with the metal–organic chemical vapor deposition(MOCVD) system. The effects of Mg-doping temperature on the structural and electrical properties of nonpolar p-type GaN films were investigated in detail. It is found that all the surface morphology, crystalline quality, strains, and electrical properties of nonpolar a-plane p-type GaN films are interconnected, and are closely related to the Mg-doping temperature. This means that a proper performance of nonpolar p-type GaN can be expected by optimizing the Mg-doping temperature. In fact, a hole concentration of 1.3×10^(18)cm^(-3), a high Mg activation efficiency of 6.5%,an activation energy of 114 me V for Mg acceptor, and a low anisotropy of 8.3% in crystalline quality were achieved with a growth temperature of 990℃. This approach to optimizing the Mg-doping temperature of the nonpolar a-plane p-type GaN film provides an effective way to fabricate high-efficiency optoelectronic devices in the future.
基金supported by the National Natural Science Foundation of China(Grant Nos.62074077,61921005,61974062,and 61904082)the China Postdoctoral Science Foundation(Grant No.2020M671441)+1 种基金the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(Grant Nos.19KJB510006 and 19KJB510039)the Natural Science Foundation of Jiangsu Province(Grant No.BK20190765)。
文摘Nonpolar(1120)plane In_(x)Ga_(1-x)N epilayers comprising the entire In content(x)range were successfully grown on nanoscale Ga N islands by metal-organic chemical vapor deposition.The structural and optical properties were studied intensively.It was found that the surface morphology was gradually smoothed when x increased from 0.06 to 0.33,even though the crystalline quality was gradually declined,which was accompanied by the appearance of phase separation in the In_(x)Ga_(1-x)N layer.Photoluminescence wavelengths of 478 and 674 nm for blue and red light were achieved for x varied from 0.06 to 0.33.Furthermore,the corresponding average lifetime(τ_(1/e))of carriers for the nonpolar In Ga N film was decreased from 406 ps to 267 ps,indicating that a high-speed modulation bandwidth can be expected for nonpolar In Ga N-based light-emitting diodes.Moreover,the bowing coefficient(b)of the(1120)plane In Ga N was determined to be 1.91 e V for the bandgap energy as a function of x.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61874161 and 11474105)the Science and Technology Program of Guangdong Province,China(Grant Nos.2017B010127001 and 2015B010105011)+4 种基金the Education Department Project of Guangdong Province,China(Grant No.2017KZDXM022)the Science and Technology Project of Guangzhou City,China(Grant No.201607010246)the Program for Changjiang Scholars and Innovative Research Team in Universities of China(Grant No.IRT13064)the Science and Technology Project of Shenzhen City,China(Grant No.GJHZ20180416164721073)the Science and Technology Planning of Guangdong Province,China(Grant No.2015B010112002)
文摘AlGaN-based ultraviolet light-emitting diodes(UV-LEDs) have attracted considerable interest due to their wide range of application fields. However, they are still suffering from low light out power and unsatisfactory quantum efficiency.The utilization of polarization-doped technique by grading the Al content in p-type layer has demonstrated its effectiveness in improving LED performances by providing sufficiently high hole concentration. However, too large degree of grading through monotonously increasing the Al content causes strains in active regions, which constrains application of this technique, especially for short wavelength UV-LEDs. To further improve 340-nm UV-LED performances, segmentally graded Al content p-Al_xGa_(1-x)N has been proposed and investigated in this work. Numerical results show that the internal quantum efficiency and output power of proposed structures are improved due to the enhanced carrier concentrations and radiative recombination rate in multiple quantum wells, compared to those of the conventional UV-LED with a stationary Al content AlGaN electron blocking layer. Moreover, by adopting the segmentally graded p-Al_xGa_(1-x)N, band bending within the last quantum barrier/p-type layer interface is effectively eliminated.
基金supported by the National Natural Science Foundation of China(Grant Nos.11474105 and 51172079)the Science and Technology Program of Guangdong Province,China(Grant Nos.2015B090903078 and 2015B010105011)+2 种基金the Program for Changjiang Scholars and Innovative Research Team in University,China(Grant No.IRT13064)the Science and Technology Project of Guangzhou City,China(Grant No.201607010246)the Science and Technology Planning Project of Guangdong Province,China(Grant No.2015A010105025)
文摘We investigate the performances of the near-ultraviolet（about 350 nm-360 nm） light-emitting diodes（LEDs） each with specifically designed irregular sawtooth electron blocking layer（EBL） by using the APSYS simulation program.The internal quantum efficiencies（IQEs）,light output powers,carrier concentrations in the quantum wells,energy-band diagrams,and electrostatic fields are analyzed carefully.The results indicate that the LEDs with composition-graded pAlxGa1-xN irregular sawtooth EBLs have better performances than their counterparts with stationary component p-AlGaN EBLs.The improvements can be attributed to the improved polarization field in EBL and active region as well as the alleviation of band bending in the EBL/p-AlGaN interface,which results in less electron leakage and better hole injection efficiency,thus reducing efficiency droop and enhancing the radiative recombination rate.
基金supported by the National Natural Science Foundation of China(Grant Nos.11474105 and 51172079)the Science and Technology Program of Guangdong Province,China(Grant Nos.2015B090903078 and 2015B010105011)+1 种基金the Science and Technology Project of Guangzhou City,China(Grant No.201607010246)the Program for Changjiang Scholars and Innovative Research Team in Universities of China(Grant No.IRT13064)
文摘The anomalous hysteresis in a perovskite solar cell induced by an asymmetric field is confirmed by a capacitance–voltage measurement. By applying several cycles of alternating reverse and forward scans, this hysteresis phenomenon is obviously alleviated, resulting in a hysteresis-less state in the perovskite solar cell. Meanwhile, the open-circuit voltage and power conversion efficiency of the perovskite solar cell are enhanced by 55.74% and 61.30%, respectively, while the current density and fill factor keep almost invariable. The operation of alleviating hysteresis is essential for further research and is likely to bring in performance gains.
基金Project supported by the National Natural Science Foundation of China(Grant No.51172079)the Science and Technology Program of Guangdong Province,China(Grant Nos.2010B090400456 and 2010A081002002)+1 种基金the Science and Technology Program of Guangzhou,China(Grant No.2011J4300018)the Program for Changjiang Scholars and Innovative Research Team in Universities of China(Grant No.IRT13064)
文摘A theoretical study of polar and semi/non-polar InGaN/GaN light-emitting diodes（LEDs） with different internal surface polarization charges, which can be grown on Si substrates, is conducted by using APSYS software. In comparison with polar structure LEDs, the semi-polar structure exhibits a higher concentration of electrons and holes and radiative recombination rate, and its reduced built-in polarization field weakens the extent of band bending which causes the shift of peak emission wavelength. So the efficiency droop of semi-polar InGaN/GaN LEDs declines obviously and the optical power is significantly improved. In comparison with non-polar structure LEDs, although the concentration of holes and electrons as well as the radiative recombination rate of the semi-polar structure are better in the last two quantum wells（QWs） approaching the p-Ga N side, the uniformity of distribution of carriers and radiative recombination rate for the nonpolar structure is better. So the theoretical analysis indicates that the removal of the internal polarization field in the MQWs active regions for non-polar structure LEDs contributes to the uniform distribution of electrons and holes, and decreases the electron leakage. Thus it enhances the radiative recombination rate, and further improves the IQEs and optical powers, and shows the best photoelectric properties among these three structures.
