期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
空间参数对毫秒–纳秒组合激光烧蚀铝合金的影响
1
作者 蔡源成 苑博识 张珑宝 《应用物理》 2024年第4期230-242,共13页
烧蚀形貌反映了激光加工的质量。因此,研究组合激光在加工时的温度及形貌十分重要。本文主要研究了空间参数(光斑大小及组合方式)对铝合金烧蚀形貌及温度的影响。实验结果表明,在毫秒激光作用后,铝合金表面温度逐渐升高到1800 K左右出... 烧蚀形貌反映了激光加工的质量。因此,研究组合激光在加工时的温度及形貌十分重要。本文主要研究了空间参数(光斑大小及组合方式)对铝合金烧蚀形貌及温度的影响。实验结果表明,在毫秒激光作用后,铝合金表面温度逐渐升高到1800 K左右出现平台期。在纳秒激光作用后,铝合金表面温度瞬间升高到3200 K左右并快速下降,纳秒激光的作用有助于熔融物的迁移。当纳秒光斑大时,烧蚀形貌呈碗状,深径比较小,边缘基本没有喷溅物。当纳秒光斑较小时,烧蚀形貌接近于孔状,深径比较大,边缘喷溅物较多。通过对物理模型的分析和仿真,探讨了空间参数对熔池影响的物理机制。本文的研究成果对激光加工效果的控制有重要的指导意义。 展开更多
关键词 组合激光 空间参数 深径比 烧蚀形貌
下载PDF
毫秒/纳秒激光致碳纤维环氧树脂损伤形貌研究 被引量:7
2
作者 姜珊珊 蔡继兴 +1 位作者 金光勇 苑博识 《激光技术》 CAS CSCD 北大核心 2018年第6期775-779,共5页
为了研究碳纤维环氧树脂在不同脉宽激光辐照下的损伤形貌,采用全自动变焦测量技术进行了实验验证,测量了碳纤维环氧树脂在毫秒/纳秒脉冲激光辐照下,损伤面积、损伤深度以及损伤形貌随激光能量密度的变化。结果表明,在毫秒脉冲激光作用下... 为了研究碳纤维环氧树脂在不同脉宽激光辐照下的损伤形貌,采用全自动变焦测量技术进行了实验验证,测量了碳纤维环氧树脂在毫秒/纳秒脉冲激光辐照下,损伤面积、损伤深度以及损伤形貌随激光能量密度的变化。结果表明,在毫秒脉冲激光作用下,材料损伤区域中心会产生一定的温度积累,损伤区域有一定的热效应,出现熔融、热解等现象,当激光能量密度为20. 5J/cm^2时,材料的损伤深度达到了47. 3μm,材料表面析出的碳化物的高度为157. 1μm,损伤深度以及表面碳化物的高度都随着能量密度的增大而增大;在纳秒激光作用下,光斑周围有明显的热反应区域,当能量密度大于47. 3J/cm^2时,表面的热反应区尤为明显,损伤面积随激光能量密度的增大明显增大,由于作用时间较短,损伤主要为表层损伤;树脂热解的气体向外膨胀,导致纤维结构断裂。研究结果为激光对碳纤维环氧树脂的损伤效果提供了实验依据。 展开更多
关键词 激光物理 损伤形貌 自动变焦 碳纤维环氧树脂 损伤机理
下载PDF
The acceleration mechanism of shock wave induced by millisecond-nanosecond combined-pulse laser on silicon
3
作者 李婧祎 张巍 +3 位作者 周宇 苑博识 蔡继兴 金光勇 《Plasma Science and Technology》 SCIE EI CAS CSCD 2021年第5期139-146,共8页
The velocity variation law of shock wave induced by millisecond-nanosecond combined-pulse laser has been investigated experimentally. The pulse delay and laser energy are important experimental variables. The method o... The velocity variation law of shock wave induced by millisecond-nanosecond combined-pulse laser has been investigated experimentally. The pulse delay and laser energy are important experimental variables. The method of laser shadowgraphy is used in the experiment.Experimental results show that when the pulse delay is 2.4 ms, the ms and ns laser energy density is 301 J cm^(-2) and 12 J cm^(-2), respectively, the velocity of shock wave is 1.09 times faster than that induced by single ns pulse laser. It is inferred that the shock wave propagates in the plasma is faster than that in air. When the ms and ns laser energy density is 414.58 and 24 J cm^(-2), the velocity of shock wave shows rising trend with pulse delay in a range of 1.4 ms>Δt> 0.8 ms. It is indicated that with the increase of ns laser energy, the laser energy absorbed by laser-supported absorption wave increases. The mechanism of inverse bremsstrahlung absorption acts with target surface absorption simultaneously during the ns laser irradiation. Thus, the phenomenon of the double shock wave is induced. The numerical results of the phenomenon were accordance with experiment. The results of this research can provide a reference for the field of laser propulsion. 展开更多
关键词 shock wave laser-supported absorption wave plasma
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部