A new impedance controller based on the dynamic surface control-backstepping technique to actualize the anticipant dynamic relationship between the motion of end-effector and the external torques was presented.Compari...A new impedance controller based on the dynamic surface control-backstepping technique to actualize the anticipant dynamic relationship between the motion of end-effector and the external torques was presented.Comparing with the traditional backstepping method that has "explosion of terms" problem,the new proposed control system is a combination of the dynamic surface control technique and the backstepping.The dynamic surface control(DSC) technique can resolve the "explosion of terms" problem that is caused by differential coefficient calculation in the model,and the problem can bring a complexity that will cause the backstepping method hardly to be applied to the practical application,especially to the multi-joint robot.Finally,the validity of the method was proved in the laboratory environment that was set up on the 5-DOF(degree of freedom) flexible joint robot.Tracking errors of DSC-backstepping impedance control that were 2.0 and 1.5 mm are better than those of backstepping impedance control which were 3.5 and 2.5 mm in directions X,Y in free space,respectively.And the anticipant Cartesian impedance behavior and compliant behavior were achieved successfully as depicted theoretically.展开更多
This article investigates virtual reality (VR)-based teleoperation with robustness against modeling errors. VR technology is an effective way to overcome the large time delay during space robot teleoperation. However,...This article investigates virtual reality (VR)-based teleoperation with robustness against modeling errors. VR technology is an effective way to overcome the large time delay during space robot teleoperation. However, it depends highly on the accuracy of model. Model errors between the virtual and real environment exist inevitably. The existing way to deal with the problem is by means of either model matching or robot compliance control. As distinct from the existing methods, this article tries to combine m...展开更多
This article provides a flexible-joint-manipulator,which incorporates with three means to make its mechanical arm come into compliant contact with the objects with a force kept within an acceptable range. At first,the...This article provides a flexible-joint-manipulator,which incorporates with three means to make its mechanical arm come into compliant contact with the objects with a force kept within an acceptable range. At first,the Cartesian impedance control law is introduced on the basis of virtual decomposition to realize the compliance control. Then,adaptive dynamic joint compensators on all joints are used to achieve more precise control. Finally,a Cartesian force-feedback path generation is developed for collision ...展开更多
基金Project(2006AA04Z228) supported by the National High-Tech Research and Development Program of ChinaProject(PCSIRT) supported by Program for Changjiang Scholars and Innovative Research Team in University
文摘A new impedance controller based on the dynamic surface control-backstepping technique to actualize the anticipant dynamic relationship between the motion of end-effector and the external torques was presented.Comparing with the traditional backstepping method that has "explosion of terms" problem,the new proposed control system is a combination of the dynamic surface control technique and the backstepping.The dynamic surface control(DSC) technique can resolve the "explosion of terms" problem that is caused by differential coefficient calculation in the model,and the problem can bring a complexity that will cause the backstepping method hardly to be applied to the practical application,especially to the multi-joint robot.Finally,the validity of the method was proved in the laboratory environment that was set up on the 5-DOF(degree of freedom) flexible joint robot.Tracking errors of DSC-backstepping impedance control that were 2.0 and 1.5 mm are better than those of backstepping impedance control which were 3.5 and 2.5 mm in directions X,Y in free space,respectively.And the anticipant Cartesian impedance behavior and compliant behavior were achieved successfully as depicted theoretically.
基金National Natural Science Foundation of China (60675054)National High-Tech Research and Development Program (2006AA04Z228)"111" Project (B07018)
文摘This article investigates virtual reality (VR)-based teleoperation with robustness against modeling errors. VR technology is an effective way to overcome the large time delay during space robot teleoperation. However, it depends highly on the accuracy of model. Model errors between the virtual and real environment exist inevitably. The existing way to deal with the problem is by means of either model matching or robot compliance control. As distinct from the existing methods, this article tries to combine m...
基金National Natural Science Foundation of China (60675054)National High Technology Research and Development Program of China (2006AA04Z228)"111" Project (B07018)
文摘This article provides a flexible-joint-manipulator,which incorporates with three means to make its mechanical arm come into compliant contact with the objects with a force kept within an acceptable range. At first,the Cartesian impedance control law is introduced on the basis of virtual decomposition to realize the compliance control. Then,adaptive dynamic joint compensators on all joints are used to achieve more precise control. Finally,a Cartesian force-feedback path generation is developed for collision ...
