期刊文献+
共找到9篇文章
< 1 >
每页显示 20 50 100
淀粉废水生物处理方法研究进展 被引量:2
1
作者 蒋梁鹤 郑学明 +1 位作者 尚会建 允川 《化工进展》 EI CAS CSCD 北大核心 2009年第S2期63-65,共3页
该文论述淀粉废水生物处理方法研究发展概况,综述了目前淀粉废水的生物处理方法和工艺,并重点介绍了淀粉废水处理方面的最新研究成果,并分析了这些方法的优缺点。
关键词 淀粉 废水 处理 综述
下载PDF
葡萄糖检测方法研究进展 被引量:9
2
作者 王亮 尚会建 +4 位作者 王丽梅 杨立彦 允川 蒋梁鹤 郑学明 《河北工业科技》 CAS 2010年第2期132-135,共4页
葡萄糖作为一种重要的化工原料及中间体,其检测对于分析产品组成及监测反应进程有着十分重要的作用。介绍了葡萄糖的主要检测方法:HPLC法、分光光度法、旋光度法、生物传感器法、气相色谱法等。
关键词 葡萄糖 HPLC 分光光度 旋光度 生物传感器
下载PDF
活性炭催化臭氧化处理含氰废水的试验研究 被引量:8
3
作者 尚会建 蒋梁鹤 +3 位作者 允川 郑学明 王亮 杨丽艳 《黄金》 CAS 北大核心 2011年第3期56-59,共4页
研究了活性炭催化臭氧化降解低质量浓度含氰废水,考察了臭氧投加量、活性炭用量、pH值等因素对处理效果的影响。试验结果表明:活性炭对臭氧有明显的催化作用,并可以提高臭氧的利用率;在CN-初始质量浓度150 mg/L、臭氧投加量30 mg/min、... 研究了活性炭催化臭氧化降解低质量浓度含氰废水,考察了臭氧投加量、活性炭用量、pH值等因素对处理效果的影响。试验结果表明:活性炭对臭氧有明显的催化作用,并可以提高臭氧的利用率;在CN-初始质量浓度150 mg/L、臭氧投加量30 mg/min、活性炭14 g/L、反应30 min条件下,CN-去除率为99.8%,相对于单独臭氧化过程CN-去除率有了显著提高;通过自由基捕捉剂Na2CO3对催化反应的影响,验证了活性炭催化臭氧化过程产生.OH;同时,还发现了催化臭氧化过程中活性炭的吸附效果;说明催化臭氧化去除CN-的过程为O3直接氧化、活性炭吸附与.OH间接氧化共同的结果。 展开更多
关键词 催化臭氧化 含氰废水 羟基自由基 活性炭(AC)
下载PDF
超声波浸渍制备醋酸锌-活性炭催化剂 被引量:3
4
作者 尚会建 王亮 +3 位作者 杨立彦 允川 蒋梁鹤 郑学明 《煤炭转化》 CAS CSCD 北大核心 2011年第1期65-69,共5页
采用浸渍法制备醋酸锌-活性炭催化剂,研究了普通浸渍和超声波浸渍制备醋酸锌-活性炭催化剂,通过优化实验,得出超声波浸渍的适宜条件是:浸渍时间30min,超声波频率28MHz,浸渍温度45℃.在此条件下制得的催化剂较普通浸渍制得的催化剂醋酸... 采用浸渍法制备醋酸锌-活性炭催化剂,研究了普通浸渍和超声波浸渍制备醋酸锌-活性炭催化剂,通过优化实验,得出超声波浸渍的适宜条件是:浸渍时间30min,超声波频率28MHz,浸渍温度45℃.在此条件下制得的催化剂较普通浸渍制得的催化剂醋酸锌含量提高了7%,比表面积提高了约30%.活性测试结果表明,超声波浸渍制备的催化剂活性较普通浸渍制得的催化剂活性显著提高,其中在180℃时活性提高了约34.54%. 展开更多
关键词 醋酸锌 超声波 比表面积 活性测试
下载PDF
丁基多苷合成的影响因素探讨及其合成动力学研究 被引量:1
5
作者 尚会建 杨立彦 +3 位作者 王亮 允川 蒋梁鹤 郑学明 《安徽农业科学》 CAS 北大核心 2011年第7期3790-3792,3853,共4页
[目的]研究丁基多苷合成的影响因素,探讨其合成动力学。[方法]在转糖苷化法合成烷基多苷的过程中,以对甲苯磺酸和硬脂酸为复合催化剂,采用反应与精馏耦合的工艺,制备中间产物丁基多苷。[结果]合成丁基多苷适宜的工艺条件为:催化剂用量为... [目的]研究丁基多苷合成的影响因素,探讨其合成动力学。[方法]在转糖苷化法合成烷基多苷的过程中,以对甲苯磺酸和硬脂酸为复合催化剂,采用反应与精馏耦合的工艺,制备中间产物丁基多苷。[结果]合成丁基多苷适宜的工艺条件为:催化剂用量为1.2 g(对甲基苯磺酸和硬脂酸的复配比为6∶1)、反应温度为110℃、醇糖比为8∶1。结果表明,醇糖摩尔比越大,丁基单苷含量越多,丁基糖苷的聚合度越小,而催化剂用量和反应温度对丁基多苷的组成影响不大,随着催化剂用量的增加或反应温度的提高,反应时间明显缩短;得出合成丁基糖苷合成的动力学方程:-dCA/dt=0.163 7exp(-1.968×103/RT)CA-0.003 49exp(-2.727×103/RT)CE。[结论]该研究得出的丁基多苷制备的适宜条件及其合成动力学方程可为长链烷基多苷的合成提供理论基础。 展开更多
关键词 丁基多苷 复合催化剂 聚合度 反应动力学
下载PDF
Effect Analysis on the Soaking Technics of Corn Wet Milling in the Laboratory 被引量:1
6
作者 尚会建 允川 +4 位作者 蒋梁鹤 王亮 杨立彦 郑学明 王丽梅 《Agricultural Science & Technology》 CAS 2010年第11期56-58,共3页
[Objective] The research aimed to find the optimal condition of corn starch production in the laboratory and analyze the soaking effect.[Method] The orthogonal test was used to determine the suitable technological con... [Objective] The research aimed to find the optimal condition of corn starch production in the laboratory and analyze the soaking effect.[Method] The orthogonal test was used to determine the suitable technological condition.By the light microscope and the scanning electron microscope,the soaking effect was analyzed.[Result] The suitable soaking condition was:soaking time 48 h,soaking temperature 55 ℃ and SO2 concentration 0.2%.The microscopic analysis result was that the protein matrix was sufficiently decomposed in the suitable soaking condition.The soaking effect had the positive correlation with the decomposed degree of protein matrix.[Conclusion] The research provided the basis for the soaking technics research of corn starch in the laboratory. 展开更多
关键词 CORN Soaking technics Microscopic analysis Protein decomposition
下载PDF
硝酸氧化法制草酸过程中各组分的分析检测
7
作者 王亮 尚会建 +4 位作者 王丽梅 杨立彦 允川 蒋梁鹤 郑学明 《应用化工》 CAS CSCD 2010年第1期139-140,152,共3页
研究了硝酸氧化淀粉水解液制备草酸反应液中各组分的检测方法。采用旋光光度计检测葡萄糖含量,结果表明,葡萄糖在溶液中的质量比与溶液的旋光值呈良好的线性关系;采用高效液相色谱分析母液中的草酸含量。其余酸性组分采用碱溶液滴定。
关键词 葡萄糖 旋光 草酸 高效液相色谱
下载PDF
Investigation on the Factors Influencing the Synthesis of Butyl Polyglycosides and Its Synthesis Kinetics
8
作者 尚会建 杨立彦 +3 位作者 王亮 允川 蒋梁鹤 郑学明 《Plant Diseases and Pests》 CAS 2011年第1期39-42,共4页
[ Objective ] The paper was to study the factors influencing the synthesis of butyl polyglycosides and its synthesis kineties. [ Method ] In the synthesis process of alkyl polyglycosides by transglyeosidation method, ... [ Objective ] The paper was to study the factors influencing the synthesis of butyl polyglycosides and its synthesis kineties. [ Method ] In the synthesis process of alkyl polyglycosides by transglyeosidation method, p-toluenesulfonie acid and stearie acid were used as composite catalyst, intermediate product butyl polyglycosides was prepared via reactive distillation technology. [ Result ] The suitable preparation conditian of butyl polyglyeasides was as follows: catalyst usage, 1.2 g( p-toluenesulfoni :stearie acid = 6:1 ) ; reaction temperature, 110 ℃ ; the ratio of butanol and glucose, 8: 1. The results showed that the larger the molar ratio of butanol and glucose was,the more the butyl monoside content was, and the less the polymerizatian degree of butyl glyeasides was. The catalyst usage and reaction temperature had little influence on the component of butyl polyglyeesides. With the increase of catalyst usage or reaction temperature,the reaction time was shortened dramatically. The kinetic equation for the synthesis of butyl glueeside was finally obtained as follows: -dCA/dt =0.163 7exp( -1. 968×10^3/RT)CA -0.003 49 exp ( -2.727×10^3/RT) Ce. [ Conclusionl The suitable condition for the preparation of butyl polyglyeasides and its synthesis kinetic equation obtained in the study could provide theoretical basis for the synthesis of long-chain alkyl polyglyeasides. 展开更多
关键词 Butyl polyglycosides Composite catalyst Polymerization degree Reaction kinetic
下载PDF
玉米湿法实验室浸泡工艺的浸泡效果分析
9
作者 尚会建 允川 +4 位作者 蒋梁鹤 王亮 杨立彦 郑学明 王丽梅 《安徽农业科学》 CAS 北大核心 2011年第9期5371-5373,共3页
[目的]确定实验室玉米淀粉生产的最适宜条件,并对浸泡效果进行分析。[方法]应用正交试验确定适宜的工艺条件,通过光学显微镜和扫描电子显微镜对浸泡效果进行分析。[结果]适宜的浸泡条件为:浸泡时间48 h,浸泡温度55℃,SO2浓度0.2%。显微... [目的]确定实验室玉米淀粉生产的最适宜条件,并对浸泡效果进行分析。[方法]应用正交试验确定适宜的工艺条件,通过光学显微镜和扫描电子显微镜对浸泡效果进行分析。[结果]适宜的浸泡条件为:浸泡时间48 h,浸泡温度55℃,SO2浓度0.2%。显微分析结果为:在适宜的浸泡条件下,蛋白质基质分解充分。浸泡效果的好坏与蛋白质基质的分解程度呈正相关。[结论]该研究可为实验室玉米淀粉的浸泡工艺研究提供基础。 展开更多
关键词 玉米 浸泡工艺 显微分析 蛋白质分解
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部