In this work, by controlling the positional relationship between the target and the focal point, the surface damage, shock wave phenomenon and propagation mechanism involved in the plasma generation of fused silica by...In this work, by controlling the positional relationship between the target and the focal point, the surface damage, shock wave phenomenon and propagation mechanism involved in the plasma generation of fused silica by millisecond pulsed laser irradiation at different focal positions were studied. Laser energy is an important experimental variable. The dynamic process of plasma was detected by optical shadow method, and the influence of surface film damage on plasma propagation and the propagation mechanism at different focal positions were discussed. The study found that the plasma induced by the pulsed laser at the focus position within 0–20 μs exploded, the micro-droplets formed around 20 μs. At the same time, a shock wave is formed by the compressed air, the micro-droplets are compressed under the action of the shock wave recoil pressure, and the micro-droplets channel phenomenon is observed in the micro-droplets. The peak velocities of plasma and combustion wave appear earlier in the pre-focus position than in the post-focus position. This research provides a reference for the field of laser processing using fused silica as the substrate.展开更多
The velocity variation law of shock wave induced by millisecond-nanosecond combined-pulse laser has been investigated experimentally. The pulse delay and laser energy are important experimental variables. The method o...The velocity variation law of shock wave induced by millisecond-nanosecond combined-pulse laser has been investigated experimentally. The pulse delay and laser energy are important experimental variables. The method of laser shadowgraphy is used in the experiment.Experimental results show that when the pulse delay is 2.4 ms, the ms and ns laser energy density is 301 J cm^(-2) and 12 J cm^(-2), respectively, the velocity of shock wave is 1.09 times faster than that induced by single ns pulse laser. It is inferred that the shock wave propagates in the plasma is faster than that in air. When the ms and ns laser energy density is 414.58 and 24 J cm^(-2), the velocity of shock wave shows rising trend with pulse delay in a range of 1.4 ms>Δt> 0.8 ms. It is indicated that with the increase of ns laser energy, the laser energy absorbed by laser-supported absorption wave increases. The mechanism of inverse bremsstrahlung absorption acts with target surface absorption simultaneously during the ns laser irradiation. Thus, the phenomenon of the double shock wave is induced. The numerical results of the phenomenon were accordance with experiment. The results of this research can provide a reference for the field of laser propulsion.展开更多
基金supported by Natural Science Foundation of Jilin Province,China(No.20220101032JC)。
文摘In this work, by controlling the positional relationship between the target and the focal point, the surface damage, shock wave phenomenon and propagation mechanism involved in the plasma generation of fused silica by millisecond pulsed laser irradiation at different focal positions were studied. Laser energy is an important experimental variable. The dynamic process of plasma was detected by optical shadow method, and the influence of surface film damage on plasma propagation and the propagation mechanism at different focal positions were discussed. The study found that the plasma induced by the pulsed laser at the focus position within 0–20 μs exploded, the micro-droplets formed around 20 μs. At the same time, a shock wave is formed by the compressed air, the micro-droplets are compressed under the action of the shock wave recoil pressure, and the micro-droplets channel phenomenon is observed in the micro-droplets. The peak velocities of plasma and combustion wave appear earlier in the pre-focus position than in the post-focus position. This research provides a reference for the field of laser processing using fused silica as the substrate.
基金supported by the Natural Science Foundation of Jilin Province (No. 20200201194JC)the Education Department of Jilin Province (No. JJKH20200735KJ)National Natural Science Youth Science Fund Project (No. 62005023)。
文摘The velocity variation law of shock wave induced by millisecond-nanosecond combined-pulse laser has been investigated experimentally. The pulse delay and laser energy are important experimental variables. The method of laser shadowgraphy is used in the experiment.Experimental results show that when the pulse delay is 2.4 ms, the ms and ns laser energy density is 301 J cm^(-2) and 12 J cm^(-2), respectively, the velocity of shock wave is 1.09 times faster than that induced by single ns pulse laser. It is inferred that the shock wave propagates in the plasma is faster than that in air. When the ms and ns laser energy density is 414.58 and 24 J cm^(-2), the velocity of shock wave shows rising trend with pulse delay in a range of 1.4 ms>Δt> 0.8 ms. It is indicated that with the increase of ns laser energy, the laser energy absorbed by laser-supported absorption wave increases. The mechanism of inverse bremsstrahlung absorption acts with target surface absorption simultaneously during the ns laser irradiation. Thus, the phenomenon of the double shock wave is induced. The numerical results of the phenomenon were accordance with experiment. The results of this research can provide a reference for the field of laser propulsion.