The release of heavy metals from the combustion of hazardous wastes is an environmental issue of in-creasing concern.The species transformation characteristics of toxic heavy metals and their distribution are consid-e...The release of heavy metals from the combustion of hazardous wastes is an environmental issue of in-creasing concern.The species transformation characteristics of toxic heavy metals and their distribution are consid-ered to be a complex problem of mechanism.The behavior of hazardous dyestuff residue is investigated in a tubular furnace under the general condition of hazardous waste pyrolysis and gasfication.Data interpretation has been aided by parallel theoretical study based on a thermodynamic equilibrium model based on the principle of Gibbs free en-ergy minimization.The results show that Ni,Zn,Mn,and Cr are more enriched in dyestuff residue incineration than other heavy metals(Hg,As,and Se)subjected to volatilization.The thermodynamic model calculation is used for explaining the experiment data at 800℃ and analyzing species transformation of heavy metals.These results of species transformation are used to predict the distribution and emission characteristics of trace elements.Although most trace element predictions are validated by the measurements,cautions are in order due to the complexity of incineration systems.展开更多
Wall slip behavior of three commercial polymer melts polypropylene(iPP),low-density polyethylene(LDPE)(branched chains) and high-density polyethylene(HDPE)(linear chains) were studied by using a capillary rheometer wi...Wall slip behavior of three commercial polymer melts polypropylene(iPP),low-density polyethylene(LDPE)(branched chains) and high-density polyethylene(HDPE)(linear chains) were studied by using a capillary rheometer with twin bores at different temperatures.The results show that a sudden first-stick-then-slip transition was observed for HDPE and a first-slip-then-stick transition was observed for LDPE and iPP as the shear rate sweep was done in an increased order,which shows that the chain structure has an obvious effect on the wall slip behavior of polymers.The critical shear stress for the onset of stick-slip transition increases linearly with temperature for HDPE,which accords with the disentanglement mechanism proposed by Brochard and de Gennes.While the extrapolation length used to quantify the magnitude of the transition remains about 0.05-0.09 mm for HDPE at 150-230 ℃.Also the relationship between the critical shear stress for the onset of wall slip and the molecular mass for polymer samples agrees with the disentanglement model of Brochard and de Gennes.The onset of slip-stick transition for LDPE and iPP at a critical shear stress may be interpreted as the shear thinning of the polymer chains at high shear rates,preventing further development of wall slip behavior.展开更多
基金Supported by the National Natural Science Foundation of China (No.50276055)the Superintendent's Fund of Guangzhou Institute of Energy Conversion,Chinese Academy of Sciences (No.0607ba1001).
文摘The release of heavy metals from the combustion of hazardous wastes is an environmental issue of in-creasing concern.The species transformation characteristics of toxic heavy metals and their distribution are consid-ered to be a complex problem of mechanism.The behavior of hazardous dyestuff residue is investigated in a tubular furnace under the general condition of hazardous waste pyrolysis and gasfication.Data interpretation has been aided by parallel theoretical study based on a thermodynamic equilibrium model based on the principle of Gibbs free en-ergy minimization.The results show that Ni,Zn,Mn,and Cr are more enriched in dyestuff residue incineration than other heavy metals(Hg,As,and Se)subjected to volatilization.The thermodynamic model calculation is used for explaining the experiment data at 800℃ and analyzing species transformation of heavy metals.These results of species transformation are used to predict the distribution and emission characteristics of trace elements.Although most trace element predictions are validated by the measurements,cautions are in order due to the complexity of incineration systems.
基金Projects(ZMF07020038) supported by the Young Teacher's Scientific Research Fund of Jiangsu Polytechnic University,China
文摘Wall slip behavior of three commercial polymer melts polypropylene(iPP),low-density polyethylene(LDPE)(branched chains) and high-density polyethylene(HDPE)(linear chains) were studied by using a capillary rheometer with twin bores at different temperatures.The results show that a sudden first-stick-then-slip transition was observed for HDPE and a first-slip-then-stick transition was observed for LDPE and iPP as the shear rate sweep was done in an increased order,which shows that the chain structure has an obvious effect on the wall slip behavior of polymers.The critical shear stress for the onset of stick-slip transition increases linearly with temperature for HDPE,which accords with the disentanglement mechanism proposed by Brochard and de Gennes.While the extrapolation length used to quantify the magnitude of the transition remains about 0.05-0.09 mm for HDPE at 150-230 ℃.Also the relationship between the critical shear stress for the onset of wall slip and the molecular mass for polymer samples agrees with the disentanglement model of Brochard and de Gennes.The onset of slip-stick transition for LDPE and iPP at a critical shear stress may be interpreted as the shear thinning of the polymer chains at high shear rates,preventing further development of wall slip behavior.