Room-temperature thermoelectric materials are important for converting heat into electrical energy.As a widebandgap semiconductor material,CuI has the characteristics of non-toxicity,low cost,and environmental friendl...Room-temperature thermoelectric materials are important for converting heat into electrical energy.As a widebandgap semiconductor material,CuI has the characteristics of non-toxicity,low cost,and environmental friendliness.In this work,CuI powder was synthesized by a wet chemical method,then CuI film was formed by vacuum assisted filtration of the CuI powder on a porous nylon membrane,followed by hot pressing.The film exhibits a large Seebeck coefficient of 600μV·K^(-1)at room temperature.In addition,the film also shows good flexibility(~95%retention of the electrical conductivity after being bent along a rod with a radius of 4 mm for 1000 times).A finger touch test on a single-leg TE module indicates that a voltage of 0.9 mV was immediately generated within 0.5 s from a temperature difference of 4 K between a finger and the environment,suggesting the potential application in wearable thermal sensors.展开更多
基金Supported by the International Scientific and Technological Innovation Cooperation Project between the Governments of Key National R&D Program of China(Grant No.2018YFE0111500)the National Natural Science Foundation of China(Grant No.51972234)。
文摘Room-temperature thermoelectric materials are important for converting heat into electrical energy.As a widebandgap semiconductor material,CuI has the characteristics of non-toxicity,low cost,and environmental friendliness.In this work,CuI powder was synthesized by a wet chemical method,then CuI film was formed by vacuum assisted filtration of the CuI powder on a porous nylon membrane,followed by hot pressing.The film exhibits a large Seebeck coefficient of 600μV·K^(-1)at room temperature.In addition,the film also shows good flexibility(~95%retention of the electrical conductivity after being bent along a rod with a radius of 4 mm for 1000 times).A finger touch test on a single-leg TE module indicates that a voltage of 0.9 mV was immediately generated within 0.5 s from a temperature difference of 4 K between a finger and the environment,suggesting the potential application in wearable thermal sensors.
