期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
基于DEFORM-3D的铝合金某型号工字形模锻件成形工艺优化
1
作者 陈月雁 刘强 李丹丹 《铝加工》 CAS 2024年第3期59-64,共6页
针对某型号工字形模锻件存在的穿流缺陷,结合DEFORM-3D仿真软件及对金属流线和流线缺陷的研究,提出了避免穿流缺陷的有效措施。根据生产实际,应用DEFORM-3D仿真软件,提出了3种坯料优化方案。考虑到制坯难度与成本,选取坯料优化方案2进... 针对某型号工字形模锻件存在的穿流缺陷,结合DEFORM-3D仿真软件及对金属流线和流线缺陷的研究,提出了避免穿流缺陷的有效措施。根据生产实际,应用DEFORM-3D仿真软件,提出了3种坯料优化方案。考虑到制坯难度与成本,选取坯料优化方案2进行试制。但取样分析结果表明,试制锻件穿流缺陷得到了一定程度的改善,却仍不能满足客户需求。进一步进行预锻件设计,确定合适的设计方案并进行试制。取样分析结果表明,试制锻件低倍组织均匀,金属流线合理分布,未见穿流缺陷,锻件质量满足客户需求。 展开更多
关键词 工字形模锻件 穿流 工艺优化
下载PDF
Strengthening mechanism of T8-aged Al-Cu-Li alloy with increased pre-deformation
2
作者 San-xi DENG Jin-feng LI +5 位作者 Li WANG Yue-yan CHEN Zheng-wu XIANG Peng-cheng MA Yong-lai CHEN Dan-yang LIU 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2024年第10期3151-3169,共19页
The microstructure evolution and mechanical properties of a T8-aged Al-Cu-Li alloy with increased pre-deformation(0-15%) were investigated,revealing the microstructure-strength relationship and the intrinsic strengthe... The microstructure evolution and mechanical properties of a T8-aged Al-Cu-Li alloy with increased pre-deformation(0-15%) were investigated,revealing the microstructure-strength relationship and the intrinsic strengthening mechanism.The results show that increasing the pre-deformation levels remarkably improves the strength of the alloy but deteriorates its ductility.Dislocations introduced by pre-deformation effectively suppress the formation of Guinier-Preston(GP) zones and provide more nucleation sites for T1 precipitates.This leads to more intensive and finer T1 precipitates in the samples with higher pre-deformation levels.Simultaneously,the enhanced precipitation of T1 precipitates and inhibited formation of GP zones cause the decreases in number and sizes of θ′ precipitates.The quantitative descriptions of the strength contributions from different strengthening mechanisms reveal that strengthening contributions from T1 and θ′ precipitates decrease with increasing pre-deformation.The reduced diameters of T1 precipitates are primarily responsible for their weakened strengthening effects.Therefore,the improved strength of the T8-aged Al-Cu-Li alloy is mainly attributed to the stronger strain hardening from the increased pre-deformation levels. 展开更多
关键词 Al−Cu−Li alloy PRE-DEFORMATION PRECIPITATION STRENGTH strengthening mechanism
下载PDF
Mg和Zn含量变化对7005-T6合金组织和力学性能的影响
3
作者 李僜谚 冉红卫 +1 位作者 王帅 陈月雁 《铝加工》 CAS 2022年第4期24-28,共5页
通过硬度计、电导仪、拉伸机、扫描电镜(SEM)和透射电镜(TEM)等仪器分析研究Mg、Zn含量变化对T6态7005铝合金显微组织和力学性能的影响。研究结果表明,120℃时效过程中,随着Mg含量的增加,T6态7005合金的峰时效时长逐渐减少,硬度、抗拉... 通过硬度计、电导仪、拉伸机、扫描电镜(SEM)和透射电镜(TEM)等仪器分析研究Mg、Zn含量变化对T6态7005铝合金显微组织和力学性能的影响。研究结果表明,120℃时效过程中,随着Mg含量的增加,T6态7005合金的峰时效时长逐渐减少,硬度、抗拉强度和屈服强度逐渐升高,延伸率逐渐降低。随着Zn含量的增加,T6态合金的峰时效时长几乎无变化,硬度、抗拉强度和屈服强度少量增加,延伸率逐渐增加。TEM结果表明在7005合金成分范围内,Mg含量变化对合金晶内和晶界析出相的数量和密度影响显著,Zn含量变化对7005合金沉淀析出行为的影响较小。 展开更多
关键词 7005铝合金 峰时效 析出相 力学性能
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部