In-situ TiB2/7055Al nanocomposites are fabricated by in situ melt chemical reaction from 7055Al-K2TiF6-KBF4 system under high intensity ultrasonic field,and the mechanism and kinetic model of in-situ melt chemical rea...In-situ TiB2/7055Al nanocomposites are fabricated by in situ melt chemical reaction from 7055Al-K2TiF6-KBF4 system under high intensity ultrasonic field,and the mechanism and kinetic model of in-situ melt chemical reaction are investigated.X-ray diffraction （XRD） and scanning electron microscope （SEM） analyses indicate that the sizes of in-situ TiB2 nanoparticles are in the range of 80-120 nm.The results of ice-water quenched samples show that the whole process contains four stages,and the overall in-situ reaction time is 10 minutes.The in situ synthesis process is controlled mainly by chemical reaction in earlier stage （former 3 minutes）,and by the particulate diffusing in later stage.The mechanism of key reaction between Al3Ti and AlB2 under high intensity ultrasonic in the 7055Al-K2TiF6-KBF4 system is the reaction-diffusion-crack-rediffusion.Furthermore,the reactive kinetic models in 7055Al-K2TiF6-KBF4 system are established.展开更多
In situ A356-x%PVF （particle volume fraction） ZrB2 （ x=1, 3, 5） composites were prepared via magneto-chemistry in situ reaction and the dry sliding wear properties of the composites were investigated. The experime...In situ A356-x%PVF （particle volume fraction） ZrB2 （ x=1, 3, 5） composites were prepared via magneto-chemistry in situ reaction and the dry sliding wear properties of the composites were investigated. The experimental results show that ZrB2 reinforcement particle is obtained and its morphology mainly present in spherical and regular hexagon. Wear test results show that the values of wear weight loss of the composites decrease with the increase of value under a given sliding time and a certain load of 60 N. Especially, when x=5, the weight loss of the as-prepared composite is 43.1 mg, which is only 36.4% to that ofA356 alloy, 118 rag. The wear mechanism is changed from adhesion wear to adhesion wear and abrasive wear and then to abrasive wear with the increase of x value.展开更多
The 6351 wrought aluminum alloy and K2TiF6-CaF2-LiCl components were selected as raw materials to fabricate in situ Al3Ti particulate reinforced aluminum alloy at 720℃via direct melt reaction method with electromagne...The 6351 wrought aluminum alloy and K2TiF6-CaF2-LiCl components were selected as raw materials to fabricate in situ Al3Ti particulate reinforced aluminum alloy at 720℃via direct melt reaction method with electromagnetic stirring(EMS).CaF2 and LiCl acted as fluxes to lower the reaction temperature of the system.It is shown that the electromagnetic stirring and fluxes accelerate the emulsion process of K2TiF6.Optical microscopy,scanning electron microscopy,transmission electron microscopy and energy dispersive spectrum were utilized to analyze the microstructure and components of composites.Compared to composites fabricated without EMS and fluxes,the sizes of endogenetic Al3Ti are refined from 10-15μm to 2-4μm,which are often accompanied with silicon element.The morphology of Al3Ti or Al3TiSi0.22 exhibits triangle,quadrilateral and other clumpy patterns. Because of the Ca elements from CaF2,the sizes of Mg2Si decrease from 8-10μm to 1-2μm due to the formation of Ca2Si.展开更多
基金Project (50971066) supported by the National Natural Science Foundation of ChinaProject (20070299004) supported by the Research Fund for the Doctoral Program of Higher Education of China+1 种基金Project (2008-46) supported by the Jiangsu Provincial ‘333’ Project of training the High-level Talents Foundation, ChinaProject (BE2009127) supported by the Jiangsu Provincial Science Supporting Item, China
基金Project(50971066) supported by the National Natural Science Foundation of ChinaProject(20070299004) supported by Research Fund for the Doctoral Program of Higher Education of China+1 种基金Project(2008-46) supported by Jiangsu Provincial '333' Project of training the High-level Talents Foundation,ChinaProject(BE2009127) supported by Jiangsu Provincial Science Supporting Item,China
基金Funded by the National 863 High Technology Research Program(No.2007AA03Z548)National Natural Science Foundation of China(No.50971066)+2 种基金Research Fund for the Doctoral Program of Higher Education of China (No.20070299004)Jiangsu Provincial ‘333’ Project of Training the High-level Talents Foundation (No.2008-46)Jiangsu Provincial Science Supporting Item (No.BE2009127)
文摘In-situ TiB2/7055Al nanocomposites are fabricated by in situ melt chemical reaction from 7055Al-K2TiF6-KBF4 system under high intensity ultrasonic field,and the mechanism and kinetic model of in-situ melt chemical reaction are investigated.X-ray diffraction （XRD） and scanning electron microscope （SEM） analyses indicate that the sizes of in-situ TiB2 nanoparticles are in the range of 80-120 nm.The results of ice-water quenched samples show that the whole process contains four stages,and the overall in-situ reaction time is 10 minutes.The in situ synthesis process is controlled mainly by chemical reaction in earlier stage （former 3 minutes）,and by the particulate diffusing in later stage.The mechanism of key reaction between Al3Ti and AlB2 under high intensity ultrasonic in the 7055Al-K2TiF6-KBF4 system is the reaction-diffusion-crack-rediffusion.Furthermore,the reactive kinetic models in 7055Al-K2TiF6-KBF4 system are established.
基金Funded by the National Natural Science Foundation of China(No.50971066)the Jiangsu Provincial'333'Project of training the Highlevel Talents Foundation(No.2008-46)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘In situ A356-x%PVF （particle volume fraction） ZrB2 （ x=1, 3, 5） composites were prepared via magneto-chemistry in situ reaction and the dry sliding wear properties of the composites were investigated. The experimental results show that ZrB2 reinforcement particle is obtained and its morphology mainly present in spherical and regular hexagon. Wear test results show that the values of wear weight loss of the composites decrease with the increase of value under a given sliding time and a certain load of 60 N. Especially, when x=5, the weight loss of the as-prepared composite is 43.1 mg, which is only 36.4% to that ofA356 alloy, 118 rag. The wear mechanism is changed from adhesion wear to adhesion wear and abrasive wear and then to abrasive wear with the increase of x value.
基金Project(2007AA03Z548)supported by the National High-Tech Research and Development Program of ChinaProject(207038)supported by the Key Program of Ministry of Education of China+3 种基金Project(06-D-021)supported by the Talents Peak in Six Key Fields of Jiangsu Province in ChinaProject(07JDG084)supported by the Technical Enablement Foundation for the Super Special Talents of Jiangsu UniversityProject(20071108)supported by the Technical Enablement Foundation of Ministry of Education for the Returned ScholarsProject(20060299006)supported by the PhD Programs Foundation of Ministry of Education of China
文摘The 6351 wrought aluminum alloy and K2TiF6-CaF2-LiCl components were selected as raw materials to fabricate in situ Al3Ti particulate reinforced aluminum alloy at 720℃via direct melt reaction method with electromagnetic stirring(EMS).CaF2 and LiCl acted as fluxes to lower the reaction temperature of the system.It is shown that the electromagnetic stirring and fluxes accelerate the emulsion process of K2TiF6.Optical microscopy,scanning electron microscopy,transmission electron microscopy and energy dispersive spectrum were utilized to analyze the microstructure and components of composites.Compared to composites fabricated without EMS and fluxes,the sizes of endogenetic Al3Ti are refined from 10-15μm to 2-4μm,which are often accompanied with silicon element.The morphology of Al3Ti or Al3TiSi0.22 exhibits triangle,quadrilateral and other clumpy patterns. Because of the Ca elements from CaF2,the sizes of Mg2Si decrease from 8-10μm to 1-2μm due to the formation of Ca2Si.
