由于实际生产过程中的工艺偏差,时钟模块输出的实际频率和设计频率相差比较大,因此在测试阶段,需要对输出频率不在目标范围内的时钟模块进行修调。基于二分法相对遍历法具有快速收敛的特点,设计自动修调电路并分析了异步脉冲同步带来的...由于实际生产过程中的工艺偏差,时钟模块输出的实际频率和设计频率相差比较大,因此在测试阶段,需要对输出频率不在目标范围内的时钟模块进行修调。基于二分法相对遍历法具有快速收敛的特点,设计自动修调电路并分析了异步脉冲同步带来的修调误差。自动修调电路通过ATE(Automatic Test Equipment)提供的慢速脉冲对时钟模块输出的时钟计数,用二分法自动改变trim值,从而达到快速修调的目的,节省了测试时间。展开更多
Four polymers based on perylenediimide co-polymerized with thiophene, bithiophene, selenophone and thieno[3,2-b]thiophene were investigated as the acceptor materials in all-polymer solar cells. Two different donor pol...Four polymers based on perylenediimide co-polymerized with thiophene, bithiophene, selenophone and thieno[3,2-b]thiophene were investigated as the acceptor materials in all-polymer solar cells. Two different donor polymers, poly[4,8-bis（5-（2-ethylhexyl）thiophen-2-yl）benzo[ 1,2-b;4,5-b＇]dithiophene-2,6-diyl-alt-（4-（2-ethylhexyl）-3-fluorothieno[3,4- b]thiophene）-2-carboxylate-2,6-diyl] （PTB7-Th） and poly[（5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl）-alt-（3,3＇-di（2- dodecyltetradecyl）-2,2＇;5＇,2＂;5＂,2＇-quaterthiophen-5,5＇＂-diyl）] （PffBT4T-2DT）, with suitably complementary absorption spectra and energy levels were applied and examined. Among all different donor-acceptor pairs studied here, the combination of PTB7-Th：poly[NN-bis（1-hexylheptyl）-3,4,9,10-pery,enediimide-1,6/1,7-diyl-alt-2,5-thiophene] （PDI-Th） exhibited the best power conversion efficiency （PCE） of 5.13%, with open-circuit voltage （Vo：） = 0.79 lV, short-circuit current density （Jsc） = 12.35 mA.cm-2 and fill-factor （FF） = 0.52. The polymer of PDI-Th acceptor used here had a regio-irregular backbone, conveniently prepared from a mixture of 1,6- and 1,7-dibromo-PDI. It is also noteworthy that neither additive nor post- treatment is required for obtaining such a cell performance.展开更多
Geometrical light trapping is a simple and prom- ising strategy to largely improve the optical absorption and efficiency of solar cell. Nonetheless, implementation of geo- metrical light trapping in organic photovolta...Geometrical light trapping is a simple and prom- ising strategy to largely improve the optical absorption and efficiency of solar cell. Nonetheless, implementation of geo- metrical light trapping in organic photovoltaic is challenging due to the fact that uniform organic active layer can rarely be achieved on textured substrate. In this work, squarely ordered nanobowl array （SONA） is reported for the first time and [6,6]- phenyl-C6rbutyric acid methyl ester （PCBM）：poly（3-hexyl- thiophene） （P3HT）-based organic photovoltaic （OPV） device on SONA demonstrated over 28 % enhancement in power conversion efficiency over the planar counterpart. Interestingly, finite-difference time-domain （FDTD） optical simulation revealed that the superior light trapping by SONA originated from optical concentrator effect by nanobowl. Furthermore, aiming at low-cost, solution processible, and resource sus- tainable flexible solar cells, we employed Ag nanowires for the top transparent conducting electrode. This work not only revealed the in-depth understanding of light trapping by nanobowl optical concentrator, but also demonstrated the fea- sibility of implementing geometrical light trapping in OPV.展开更多
文摘由于实际生产过程中的工艺偏差,时钟模块输出的实际频率和设计频率相差比较大,因此在测试阶段,需要对输出频率不在目标范围内的时钟模块进行修调。基于二分法相对遍历法具有快速收敛的特点,设计自动修调电路并分析了异步脉冲同步带来的修调误差。自动修调电路通过ATE(Automatic Test Equipment)提供的慢速脉冲对时钟模块输出的时钟计数,用二分法自动改变trim值,从而达到快速修调的目的,节省了测试时间。
基金financially supported by the National Natural Science Foundation of China(Nos.21674001 and 51473003)
文摘Four polymers based on perylenediimide co-polymerized with thiophene, bithiophene, selenophone and thieno[3,2-b]thiophene were investigated as the acceptor materials in all-polymer solar cells. Two different donor polymers, poly[4,8-bis（5-（2-ethylhexyl）thiophen-2-yl）benzo[ 1,2-b;4,5-b＇]dithiophene-2,6-diyl-alt-（4-（2-ethylhexyl）-3-fluorothieno[3,4- b]thiophene）-2-carboxylate-2,6-diyl] （PTB7-Th） and poly[（5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl）-alt-（3,3＇-di（2- dodecyltetradecyl）-2,2＇;5＇,2＂;5＂,2＇-quaterthiophen-5,5＇＂-diyl）] （PffBT4T-2DT）, with suitably complementary absorption spectra and energy levels were applied and examined. Among all different donor-acceptor pairs studied here, the combination of PTB7-Th：poly[NN-bis（1-hexylheptyl）-3,4,9,10-pery,enediimide-1,6/1,7-diyl-alt-2,5-thiophene] （PDI-Th） exhibited the best power conversion efficiency （PCE） of 5.13%, with open-circuit voltage （Vo：） = 0.79 lV, short-circuit current density （Jsc） = 12.35 mA.cm-2 and fill-factor （FF） = 0.52. The polymer of PDI-Th acceptor used here had a regio-irregular backbone, conveniently prepared from a mixture of 1,6- and 1,7-dibromo-PDI. It is also noteworthy that neither additive nor post- treatment is required for obtaining such a cell performance.
基金supported by the HK-RGCGeneral Research Funds(HKUST 605710,604809,612111,612113)partially supported by ITS/117/13 from Hong Kong Innovation Technology Commission
文摘Geometrical light trapping is a simple and prom- ising strategy to largely improve the optical absorption and efficiency of solar cell. Nonetheless, implementation of geo- metrical light trapping in organic photovoltaic is challenging due to the fact that uniform organic active layer can rarely be achieved on textured substrate. In this work, squarely ordered nanobowl array （SONA） is reported for the first time and [6,6]- phenyl-C6rbutyric acid methyl ester （PCBM）：poly（3-hexyl- thiophene） （P3HT）-based organic photovoltaic （OPV） device on SONA demonstrated over 28 % enhancement in power conversion efficiency over the planar counterpart. Interestingly, finite-difference time-domain （FDTD） optical simulation revealed that the superior light trapping by SONA originated from optical concentrator effect by nanobowl. Furthermore, aiming at low-cost, solution processible, and resource sus- tainable flexible solar cells, we employed Ag nanowires for the top transparent conducting electrode. This work not only revealed the in-depth understanding of light trapping by nanobowl optical concentrator, but also demonstrated the fea- sibility of implementing geometrical light trapping in OPV.
