Activation of anthracite combustion by copper acetate:mechanism,effect of particle size and introduction method

This paper addressed the efect of copper acetate on the combustion characteristics of anthracite depending on the fractional composition of fuel and additive introduction method.Anthracite was impregnated with 5 wt%of Cu(CH_(3)COO)_(2)by mechanical mixing and incipient wetness impregnation.Four anthracite samples of diferent fraction with d<0.1 mm,d=0.1-0.5 mm,d=0.5-1.0 mm,and d=1.0-2.0 mm were compared.According to EDX mapping,incipient wetness impregnation provides a higher dispersion of the additive and its uniform distribution in the sample.The ignition and combustion characteristics of the modifed anthracite samples were studied by thermal analysis and high-speed video recording of the processes in a combustion chamber(at heating medium temperature of 800℃).It was found that copper acetate increases anthracite reactivity,which was evidenced by decreased onset temperature of combustion(ΔT_(i))by 35-190℃and reduced ignition delay time(Δτ_(i))by 2.1-5.4 s.Copper acetate reduces fuel underburning(on average by 70%)in the ash residue of anthracite and decreases the amount of CO and NO_(x)in gas-phase products(on average by 18.5%and 20.8%,respectively).The mechanism for activation of anthracite combustion by copper acetate is proposed.

Intensification of bituminous coal and lignite oxidation by copper-based activating additives

The oxidation of lignite and bituminous coal samples modified by 5 wt%(in terms of dry salt)addition of copper salts Cu(NO_(3))_(2),CuSO_(4),and Cu(CH_(3)COO)_(2) was studied.The samples’reactivity was studied by thermogravimetry within a temperature range of 45–600℃ at a heating rate of 2.5℃/min in an oxidizing environment.The introduction of activating additives has resulted in a significant decrease in the temperature of intense oxidation onset(ΔT_(i)=20/94℃),in a reduction in the sample residence time in the volatile matter release region(Δt_(e)=2/22 min)and the total duration of the coal combustible mass oxidation(Δt_(f)=8/14 min).The Friedman method was used to calculate the activation energy values for the oxidation process of the modified samples.The maximum change in activation energy values was observed for the bituminous coal sample.The possible mechanism behind the action of the copper-salt additives,which activate the oxidation of lignite and bituminous coal,is discussed.According to the data of mass spectrometric analysis,the concentration of NOx in the reaction products decreases as the temperature of the activated oxidation process is shifted towards the low-temperature region.