期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Detection of Pulsation and Additional Components in Eclipsing Binary RS Sct
1
作者 a.abedi K.Y.Roobiat 《Research in Astronomy and Astrophysics》 SCIE CAS CSCD 2023年第12期190-203,共14页
The eclipsing binary star RS Sct is a semi-detached system of theβLyrae type.This system was photometered for six nights in 2019 August,and 2020 June and August.The light and radial velocity curves were simultaneousl... The eclipsing binary star RS Sct is a semi-detached system of theβLyrae type.This system was photometered for six nights in 2019 August,and 2020 June and August.The light and radial velocity curves were simultaneously analyzed to obtain the absolute physical and orbital parameters of the system,and the system geometry was determined.In this system,the primary component has filled its inner Roche lobe and the secondary component is close to filling it.Moreover,the change in the orbital period of this system was investigated.The presence of the third or fourth components and the mass transfer between the two components affect the orbital period of the system.In addition,the pulsation of the primary component was detected.Also,several frequencies with high signal-to-noise ratios were identified.According to the position of the primary component in the H-R diagram and the value of the obtained frequencies,this component is likely a delta-Scuti pulsator. 展开更多
关键词 (stars:)binaries eclipsing-stars individual(RS Sct)-methods data analysis-techniques PHOTOMETRIC
下载PDF
Effect of Mg and semi solid processing on microstructure and impression creep properties of A356 alloy 被引量:9
2
作者 B.AMIR ESGANDARI B.NAMI +1 位作者 M.SHAHMIRI a.abedi 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2013年第9期2518-2523,共6页
The effects of Mg and semi solid processing on the creep properties ofA356 A1 alloy were investigated. The results show that the dislocation climb controlled creep is the dominant creep mechanism and it is not affecte... The effects of Mg and semi solid processing on the creep properties ofA356 A1 alloy were investigated. The results show that the dislocation climb controlled creep is the dominant creep mechanism and it is not affected by the semi solid processing and further addition of Mg. Mg improves the alloy creep properties probably by forming large Chinese script Mg2Si compounds at the interdendritic regions. The semi solid processed specimens exhibit better creep properties in comparison with the as cast ones. It is attributed to the reduction in the stacking fault energy resulting from the significant dissolution of Mg in the a(A1) phase. 展开更多
关键词 A356 alloy MICROSTRUCTURE semi solid processing impression creep dislocation climb controlled creep
下载PDF
Microstructural Evolution during Partial Remelting of Al—Si Alloys Containing Different Amounts of Magnesium 被引量:8
3
作者 a.abedi M.Shahmiri +1 位作者 B.Amir Esgandari B.Nami 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2013年第10期971-978,共8页
The effect of magnesium on the microstructures of A356 aluminum alloy in as-cast and semi-solid conditions was investigated. The result showed that magnesium refined the size of primary α(Al) phase and eutectic sil... The effect of magnesium on the microstructures of A356 aluminum alloy in as-cast and semi-solid conditions was investigated. The result showed that magnesium refined the size of primary α(Al) phase and eutectic silicon. Magnesium also modified considerably the eutectic silicon and decreased the size of globular α(Al) solid phase in the semi-solid processed alloy. Coarsening rate of the solid α(Al) phase during partial remelting at semi-solid temperature decreased by adding magnesium, probably due to the decrease of both the solid- liquid interfacial energy and inter-diffusion coefficient of solute atoms. 展开更多
关键词 Al--Si alloys MAGNESIUM MICROSTRUCTURE Semi-solid processing COARSENING
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部