The synthesis of a novel Li+ /Mg2+ /Al3+ containing layered double hydroxide (LDH) by using a hydrothermal synthesis route is represented in this work. The autoclaves were heated up to 100oC, 120oC, 140oC and 160oC fo...The synthesis of a novel Li+ /Mg2+ /Al3+ containing layered double hydroxide (LDH) by using a hydrothermal synthesis route is represented in this work. The autoclaves were heated up to 100oC, 120oC, 140oC and 160oC for 10 h and 48 h with a water to solid ratio (W/S) of 15:1. The physicochemical properties of the synthesized LDHs were investigated by X-ray powder diffraction (PXRD), fourier transform infrared spectroscopy (FTIR), thermo gravimetric and differential thermal analysis (TG-DTA), inductively coupled plasma optical emission spectroscopy (ICP-OES) and scanning electron microscopy (SEM). The formation of a solid solution phase depends strongly on the composition of the reactants and the synthesis temperature. Using an exact stoichiometric ratio of Li+/Mg2+/Al3+ resulted in the synthesis of amorphous phases without producing plenty of crystalline amounts of the expected solid solutions while using higher temperatures than 140oC resulted in a formation of AlO(OH). To avoid the formation of an Al containing amorphous phase or an AlO(OH) crystalline phase, the stoichiometric ratio of Li+ was changed. The results show solid solutions with the formula [Li0+xMg2-2xAl1+x(OH)6][Cl.mH2O] with X ≥ 0.9. The lattice parameters and chemical compositions for solid solutions with different compositions were determined and the pure solid solution with the highest amount of Mg (x = 0.9) is [Li0.9Mg0.2Al1.9(OH)6] [Cl.0.50H2O] with the lattice parameters a = 5.1004(4) Å, c = 15.3512(1) Å, V = 345.844(9) Å3. For X 2+ and a Li+ dominated solid solution, are coexistent.展开更多
文摘The synthesis of a novel Li+ /Mg2+ /Al3+ containing layered double hydroxide (LDH) by using a hydrothermal synthesis route is represented in this work. The autoclaves were heated up to 100oC, 120oC, 140oC and 160oC for 10 h and 48 h with a water to solid ratio (W/S) of 15:1. The physicochemical properties of the synthesized LDHs were investigated by X-ray powder diffraction (PXRD), fourier transform infrared spectroscopy (FTIR), thermo gravimetric and differential thermal analysis (TG-DTA), inductively coupled plasma optical emission spectroscopy (ICP-OES) and scanning electron microscopy (SEM). The formation of a solid solution phase depends strongly on the composition of the reactants and the synthesis temperature. Using an exact stoichiometric ratio of Li+/Mg2+/Al3+ resulted in the synthesis of amorphous phases without producing plenty of crystalline amounts of the expected solid solutions while using higher temperatures than 140oC resulted in a formation of AlO(OH). To avoid the formation of an Al containing amorphous phase or an AlO(OH) crystalline phase, the stoichiometric ratio of Li+ was changed. The results show solid solutions with the formula [Li0+xMg2-2xAl1+x(OH)6][Cl.mH2O] with X ≥ 0.9. The lattice parameters and chemical compositions for solid solutions with different compositions were determined and the pure solid solution with the highest amount of Mg (x = 0.9) is [Li0.9Mg0.2Al1.9(OH)6] [Cl.0.50H2O] with the lattice parameters a = 5.1004(4) Å, c = 15.3512(1) Å, V = 345.844(9) Å3. For X 2+ and a Li+ dominated solid solution, are coexistent.
