A Systematic Review of Thermoelectric Peltier Devices: Applications and Limitations

Conventional refrigeration processes release ammonia and freon into the atmosphere,which results in global warming.These problems may be overcome by using thermoelectric modules because of the absence of coolants or refrigerants in these systems.However,the cooling performances of such modules are relatively small in comparison to those of conventional refrigerators.In this paper,the working principles of thermoelectric modules are discussed together with a review of different relevant aspects,namely:the thermoelectric materials,and their mechanical properties used to build thermoelectric devices,different types of thermoelectric devices available on the market,mathematical modeling of thermoelectric materials,and various applications of thermoelectric materials in different fields.

Passive Control of Base Pressure in a Converging-Diverging Nozzle with Area Ratio 2.56 at Mach 1.8

In this study,a duct is considered and special attention is paid to a passive method for the control of the base pressure relying on the use of a cavity with a variable aspect ratio.The Mach number considered is 1.8,and the area ratio of the duct is 2.56.In particular,two cavities are examined,their sizes being 3:3 and 6:3.The used L/D spans the interval 1–10 while the NPRs(nozzle pressure ratio)range from 2 to 9.The results show that the control becomes effective once the nozzles are correctly expanded or under-expanded.The pressure contours at different NPR and L/D are presented.It is shown that the NPR and cavity location strongly influence the base pressure.The NPR,Mach number,and cavity aspect ratio have a strong effect on the base pressure in the wake region.

Numerical Analysis of Cavity-Based Control of Base Pressure Variations at Supersonic Mach Numbers

In the present study,the base pressure variations induced by the presence of a cavity,known to have a strong influence of the behaviour of supersonic projectiles,are investigated through numerical solution of the balance equations for mass,momentum,and energy.An area ratio of four is considered and numerical simulations are carried out at Mach M=1.2,1.4,1.6,and 1.8 assuming no cavity or cavity locations 0.5D,1D,1.5D,and 2D.The inlet pressure of the nozzle is considered as a flow variable.The Taguchi method is also used,and the considered cases are then analyzed using a full factorial experimental design.The results show that the cavity is effective in increasing the base pressure for the conditions examined.For other nozzle pressure ratios,cavities do not lead to passive control due the change in the reattachment length.The distribution of wall pressure reveals that,in general,a cavity used to implement passive control of the base pressure does not adversely influence the flow pattern in the domain.

Computation of Stiffness and Damping Derivatives of an Ogive in a Limiting Case of Mach Number and Specific Heat Ratio

This work aims to compute stability derivatives in the Newtonian limit in pitch when the Mach number tends to infinity.In such conditions,these stability derivatives depend on the Ogive’s shape and not the Mach number.Generally,the Mach number independence principle becomes effective from M=10 and above.The Ogive nose is obtained through a circular arc on the cone surface.Accordingly,the following arc slopes are consideredλ=5,10,15,−5,−10,and−15.It is found that the stability derivatives decrease due to the growth inλfrom 5 to 15 and vice versa.Forλ=5 and 10,the damping derivative declines with an increase inλfrom 5 to 10.Yet,for the damping derivatives,the minimum location remains at a pivot position,h=0.75 for large values ofλ.Hence,whenλ=−15,the damping derivatives are independent of the cone angles for most pivot positions except in the early twenty percent of the leading edge.

Modeling and Validation of Base Pressure for Aerodynamic Vehicles Based on Machine Learning Models

The application of abruptly enlarged flows to adjust the drag of aerodynamic vehicles using machine learning models has not been investigated previously.The process variables(Mach number(M),nozzle pressure ratio(η),area ratio(α),and length to diameter ratio(γ))were numerically explored to address several aspects of this process,namely base pressure(β)and base pressure with cavity(βcav).In this work,the optimal base pressure is determined using the PCA-BAS-ENN based algorithm to modify the base pressure presetting accuracy,thereby regulating the base drag required for smooth flow of aerodynamic vehicles.Based on the identical dataset,the GA-BP and PSO-BP algorithms are also compared to thePCA-BAS-ENNalgorithm.The data for training and testing the algorithmswas derived using the regression equation developed using the Box-Behnken Design(BBD).The results show that the PCA-BAS-ENN model delivered highly accurate predictions when compared to the other two models.As a result,the advantages of these results are two-fold,providing:(i)a detailed examination of the efficiency of different neural network algorithms in dealing with a genuine aerodynamic problem,and(ii)helpful insights for regulating process variables to improve technological,operational,and financial factors,simultaneously.

Numerical Analysis of a Microjet-Based Method for Active Flow Control in Convergent-Divergent Nozzles with a Sudden Expansion

A method based on microjets is implemented to control the flow properties in a convergent-divergent nozzle undergoing a sudden expansion.Three different variants of this active control technique are explored numerically by means of a finite-volume method for compressible fluid flow:with the first one,the control is implemented at the base,with the second at the wall,while the third one may be regarded as a combination of these.When jets are over-expanded,the control is not very effective.However,when a favourable pressure gradient is established in the nozzle,the control becomes effective,leading to an increase in the base pressure.