This study investigated the adsorption of Methylene Blue (MB) present in wastewater onto the activated carbon produce from Lantana camara stem. The agricultural material (Lantana camara stem) was carbonized at 300...This study investigated the adsorption of Methylene Blue (MB) present in wastewater onto the activated carbon produce from Lantana camara stem. The agricultural material (Lantana camara stem) was carbonized at 300°C for 2 h, ground and steam-activated. The Steam-Activated Lantana camara (SALC) stem carbon was characterized using Scanning Electron Microscope (SEM) and Fourier Transform Infrared (FTIR) Spectrophotometry before and after adsorption. Batch model experiments were conducted at 20°C to study the effects of pH, agitation time, adsorbent dosage and initial concentration of methylene blue. The equilibrium adsorption isotherms and kinetics were investigated. The FTIR bands at 3500, 2500, 2196 and 1682 cm-1 were shifted to 3646.3, 3030, 2822, 1709.05 cm-1 after MB adsorption. Similarly, the Scanning Electron Microscopy (SEM) analysis showed that the average pore size on the activated carbon was 20 μm. The Methylene Blue (MB) uptake increased with the increase in pH. Similarly, the dye adsorption increased as contact time increased, and reached equilibrium at 60 minutes. The removal of the dye increased when the dosage was increased from 0.5 - 2.0 g·L-1, at different dye concentrations (50 - 200 mg·L-1). The percentage removal decreased with increasing initial dye concentration for SALC. The adsorption isotherm data fitted well to the Freundlich isotherm (R2 = 0.989) while the experimental data fitted very well to the pseudo-second-order kinetic model (R2 = 0.99). This study suggests that adsorbent prepared from Lantana camara stem can be used effectively for the adsorption of methylene blue in wastewater.展开更多
The adsorption capacity of steam activated carbon prepared from Delonix regia pods SADRC for adsorption of Aniline Blue (AB) from aqueous solution was investigated under various experimental conditions. Batch study wa...The adsorption capacity of steam activated carbon prepared from Delonix regia pods SADRC for adsorption of Aniline Blue (AB) from aqueous solution was investigated under various experimental conditions. Batch study was conducted to assess the potential of the activated carbon for the removal of Aniline Blue from aqueous solution. Activated carbon prepared from Delonix regia pods was characterized using Scanning Electron Microscope (SEM) and Fourier Transform Infrared (FTIR) Spectrophotometry before and after adsorption. The FTIR, spectra of SADRC pod before and after Aniline Blue adsorption were compared to study the impact of the Aniline Blue on the activated carbon developed from the Delonix regia pod. The stretching vibration band at 2169.54 cm-1 may be due to strong CN, while the stretching vibration band at around 1580 - 1650 cm-1 may be due to C=C stretching vibration. The bands around 1350 and 426.49 cm-1 are due to C-N and –SO3H group, respectively;this further suggests that some functional groups may be present on the surface of the carbon due to the low temperature of carbonization (300°C) of the adsorbent. Equilibrium isotherm studies were carried out by varying the following four parameters: initial concentration of Aniline Blue dye solution, solution pH and adsorbent dose. The equilibrium data obtained were more fitted to Langmuir than Freundlich isotherm models. The correlation coefficient value (R2) of the pseudo first order kinetics ranged from 0.08 to 0.85 while the R2 of the pseudo second order kinetics ranged from 0.963 to 0.997 at all the temperatures and initial concentrations considered. This suggests that the adsorption kinetics of Aniline Blue onto SADRC can be represented with pseudo second order kinetic model. This study showed that Delonix regia pod could be effectively used as an adsorbent for the removal of Aniline Blue from aqueous solutions over a wide range of concentration and temperature.展开更多
文摘This study investigated the adsorption of Methylene Blue (MB) present in wastewater onto the activated carbon produce from Lantana camara stem. The agricultural material (Lantana camara stem) was carbonized at 300°C for 2 h, ground and steam-activated. The Steam-Activated Lantana camara (SALC) stem carbon was characterized using Scanning Electron Microscope (SEM) and Fourier Transform Infrared (FTIR) Spectrophotometry before and after adsorption. Batch model experiments were conducted at 20°C to study the effects of pH, agitation time, adsorbent dosage and initial concentration of methylene blue. The equilibrium adsorption isotherms and kinetics were investigated. The FTIR bands at 3500, 2500, 2196 and 1682 cm-1 were shifted to 3646.3, 3030, 2822, 1709.05 cm-1 after MB adsorption. Similarly, the Scanning Electron Microscopy (SEM) analysis showed that the average pore size on the activated carbon was 20 μm. The Methylene Blue (MB) uptake increased with the increase in pH. Similarly, the dye adsorption increased as contact time increased, and reached equilibrium at 60 minutes. The removal of the dye increased when the dosage was increased from 0.5 - 2.0 g·L-1, at different dye concentrations (50 - 200 mg·L-1). The percentage removal decreased with increasing initial dye concentration for SALC. The adsorption isotherm data fitted well to the Freundlich isotherm (R2 = 0.989) while the experimental data fitted very well to the pseudo-second-order kinetic model (R2 = 0.99). This study suggests that adsorbent prepared from Lantana camara stem can be used effectively for the adsorption of methylene blue in wastewater.
文摘The adsorption capacity of steam activated carbon prepared from Delonix regia pods SADRC for adsorption of Aniline Blue (AB) from aqueous solution was investigated under various experimental conditions. Batch study was conducted to assess the potential of the activated carbon for the removal of Aniline Blue from aqueous solution. Activated carbon prepared from Delonix regia pods was characterized using Scanning Electron Microscope (SEM) and Fourier Transform Infrared (FTIR) Spectrophotometry before and after adsorption. The FTIR, spectra of SADRC pod before and after Aniline Blue adsorption were compared to study the impact of the Aniline Blue on the activated carbon developed from the Delonix regia pod. The stretching vibration band at 2169.54 cm-1 may be due to strong CN, while the stretching vibration band at around 1580 - 1650 cm-1 may be due to C=C stretching vibration. The bands around 1350 and 426.49 cm-1 are due to C-N and –SO3H group, respectively;this further suggests that some functional groups may be present on the surface of the carbon due to the low temperature of carbonization (300°C) of the adsorbent. Equilibrium isotherm studies were carried out by varying the following four parameters: initial concentration of Aniline Blue dye solution, solution pH and adsorbent dose. The equilibrium data obtained were more fitted to Langmuir than Freundlich isotherm models. The correlation coefficient value (R2) of the pseudo first order kinetics ranged from 0.08 to 0.85 while the R2 of the pseudo second order kinetics ranged from 0.963 to 0.997 at all the temperatures and initial concentrations considered. This suggests that the adsorption kinetics of Aniline Blue onto SADRC can be represented with pseudo second order kinetic model. This study showed that Delonix regia pod could be effectively used as an adsorbent for the removal of Aniline Blue from aqueous solutions over a wide range of concentration and temperature.
