From concept to reality-A review to the primary test stand and its preliminary application in high energy density physics

Pulsed power technology,whereas the electrical energy stored in a relative long period is released in much shorter timescale,is an efficient method to create high energy density physics(HEDP)conditions in laboratory.Around the beginning of this century,China Academy of Engineering Physics(CAEP)began to build some experimental facilities for HEDP investigations,among which the Primary Test Stand(PTS),a multi-module pulsed power facility with a nominal current of 10 MA and a current rising time~90 ns,is an important achievement on the roadmap of the electro-magnetically driven inertial confinement fusion(ICF)researches.PTS is the first pulsed power facility beyond 10 TW in China.Therefore,all the technologies have to be demonstrated,and all the engineering issues have to be overcome.In this article,the research outline,key technologies and the preliminary HEDP experiments are reviewed.Prospects on HEDP research on PTS and pulsed power development for the next step are also discussed.

Recent advances of heterogeneously integrated Ⅲ–Ⅴ laser on Si

Due to the indirect bandgap nature,the widely used silicon CMOS is very inefficient at light emitting.The integration of silicon lasers is deemed as the‘Mount Everest’for the full take-up of Si photonics.The major challenge has been the materials dissimilarity caused impaired device performance.We present a brief overview of the recent advances of integratedⅢ-Ⅴlaser on Si.We will then focus on the heterogeneous direct/adhesive bonding enabling methods and associated light coupling structures.A selected review of recent representative novel heterogeneously integrated Si lasers for emerging applications like spectroscopy,sensing,metrology and microwave photonics will be presented,including DFB laser array,ultra-dense comb lasers and nanolasers.Finally,the challenges and opportunities of heterogeneous integration approach are discussed.

Carbon matrix effects on the micro-structure and performance of Pt nanowire cathode prepared by decal transfer method

High performance cathode for polymer electrolyte membrane fuel cell was prepared by depositing Pt nanowires in a carbon matrix coated on a substrate, and using decal transfer method to fabricate the membrane electrode assembly. The effects of carbon and ionomer contents on the electrode micro-structure and fuel cell performance are investigated by physical characterization and single cell testing. The Pt nanowires are gradient distributed across the cathode thickness, and more Pt exists near the membrane. Both the carbon and ionomer contents can affect the Pt nanowires distribution and aggregation. In addition, the carbon loading dominates the transport distance of gas and proton, and the ionomer content affects the triple phase boundaries and porosity in the cathode. The optimal structure of Pt nanowire cathode is obtained at 0.10 mg·cm^-2 carbon loading and 10 wt% ionomer.

Multiple reversals of vortex ratchet effects in a superconducting strip with inclined dynamic pinning landscape

Using time-dependent Ginzburg-Landau formalism,we investigate the multiple reversals of ratchet effects in an unpatterned superconducting strip by the tilted dynamic pinning potential.In the case of collinear sliding potential and Lorentz force,vortices are always confined in the channels induced by sliding potential.However,due to the inclination angle of sliding pinning potential with respect to the Lorentz force,vortices could be driven out of the channels,and unexpected results with multiple reversals of vortex rectifications are observed.The mechanism of multiple reversals of vortex rectifications is explored by analyzing different vortex motion scenarios with increasing ac current amplitudes.The multiple reversals of transverse and longitudinal ratchet effects can be highly controlled by ac amplitude and dynamic pinning velocity.What's more,at certain large current the ratchet effect reaches strongest within a wide range of pinning sliding velocity.

First results from a 760-GW linear transformer driver module for Z-pinch research

In this paper,the results of tests on a 0.76-TW linear transformer driver(LTD)module for Z-pinch research are presented for the first time.Ten LTD cavities,each generating a 1-MA/90-kV pulse on a matched load,were connected in series with a magnetically insulated voltage adder to drive the e-beam diode.Three inner stalks with different radii were tested,and the results indicate that the output parameters of the ten cavities are sensitive to the cathode radii.As an intermediate step,a high-current pulse with 832 kV/912 kA/130 ns was obtained on the e-beam diode.To date,this is the maximum power generated directly by a fast LTD with mega-ampere current output.

Vortex pinning and rectification effect in a nanostructured superconducting film with a square array of antidot triplets

We study the stability of vortices pinning and dynamics in a superconducting thin strip containing a square array of antidot triplets by using the nonlinear Ginzburg–Landau(GL)theory.Compared with the regular square array of circular holes,the vortices are no longer pinned inside the circular holes,but instead stabilized at the center of the antidot triplets depending on the geometry parameters.Moreover,the influences of the geometry parameters and the polarity of the applied current on the current–voltage(I–V)characteristics are also studied.The critical current for the sample turning into a normal state becomes smaller when the hole diameter D is smaller and the spacing B between the holes is larger.Due to the asymmetric pinning sites,our numerical simulations demonstrate that the positive and negative rectified voltages appear alternately in the resistive state of the sample under an ac current of square pulses.

基于IPSO-Gmapping算法的SLAM系统研究

针对传统Gmapping算法因粒子耗散导致定位精度不准确的现象,改进粒子群算法(IPSO)结合Gmapping算法(IPSO-Gmapping)被提出。通过引入相似度测量参数和新的学习因子,IPSO算法中粒子的全局开发能力得到提升,同时避免了陷入“局部最优值”的现象。其次将IPSO算法应用于传统的Gmapping中,使得粒子向高似然区域移动,改善了粒子的分布状态,这也使得IPSO-Gmapping算法表现出了极好的性能。分别使用公共数据集和实际场景进行验证,总体的平移旋转误差大幅度降低。通过实验测试表明,所提出的IPSO-Gmapping算法使用更少的粒子在位姿估计准确性及建图精确性上优于传统的Gmapping算法。

Case Studies on Time-Dependent Ginzburg-Landau Simulations for Superconducting Applications

The macroscopic electromagnetic properties of type-II superconductors are mainly influenced by the behavior of micro-scopic superconducting flux quantum units.Time-dependent Ginzburg-Landau(TDGL)theory is a well-known tool for describing and examining both the statics and dynamics of these superconducting entities.It have been instrumental in replicating and elucidat-ing numerous experimental results over the past decades.This paper provides a comprehensive overview of the progress in TDGL simulations,focusing on three key aspects of superconductor applications.We delve first into vortex rectification in supercon-ductors described within the TDGL framework,specifically highlighting the achievement of superconducting diode effect through asymmetric pinning landscapes and the reversible manipulation of vortex ratchets with dynamic pinning landscapes.In terms of the achievements of TDGL simulations concerning the critical current density of superconductors,we emphasize particularly on the optimization of pinning sites,including vortex pinning and dynamics in polycrystalline Nb3Sn with grain boundaries.In the third aspect,we concentrate on numerical modeling of vortex penetration and dynamics in superconducting radio-frequency cavities,including a discussion on superconductor-insulator-superconductor multilayer structures.Finally,we present key findings,insights,and perspectives derived from the discussed simulations.

Modified Arrhenius-type Constitutive Model and Artificial Neural Network-based Model for Constitutive Relationship of 316LN Stainless Steel during Hot Deformation

Hot compression experiments of 316LN stainless steel were carried out on Gleeble-3500 thermo-simulator in deforma- tion temperature range of 1 223-1 423 K and strain rate range of 0.001-1 s 1. The flow behavior was investigated to evaluate the workability and optimize the hot forging process of 316LN stainless steel pipes. Constitutive relationship of 316LN stainless steel was comparatively studied by a modified Arrhenius-type analytical constitutive model considering the effect of strain and by an ar- tificial neural network model. The accuracy and effectiveness of two models were respectively quantified by the correlation coeffi- cient and absolute average relative error. The results show that both models have high reliabilities and could meet the requirements of engineering calculation. Compared with the analytical constitutive model, the artificial neural network model has a relatively higher predictability and is easier to work in cooperation with finite element analysis software.

技能强国战略背景下高职院校体育院系专业技能认证与培训体系研究

本文旨在构建和完善高职院校体育院系的专业技能认证与培训体系,以提升学生的专业技能和就业竞争力。研究首先分析了当前体育专业教育面临的挑战和行业需求,基于此,提出了一套综合性的培训内容,包括基础理论知识、专项技能训练、教学法与训练法、体育管理与营销、健康教育与促进以及科研方法与实践。针对培训方法,研究强调了理论与实践相结合、项目化学习、师生共研、信息技术应用、创新创业、实习与实践以及国际交流与合作的重要性。通过实施这一体系,旨在培养学生的综合素质,增强其适应未来体育行业发展的能力。

Ultracompact bandwidth-tunable filter based on subwavelength grating-assisted contra-directional couplers

An ultracompact,bandwidth-tunable filter has been demonstrated using a silicon-on-insulator(SOI)wafer.The device is based on cascaded grating-assisted contra-directional couplers(GACDCs).It also involves the use of a subwavelength grating(SWG)structure.By heating one of the heaters on GACDCs,a bandwidth tunability of~6 nm is achieved.Owing to the benefit of having a large coupling coefficient between SWG and strip waveguides,the length of the coupling region is only 100 pm.Moreover,the combination of the curved SWG and the tapered strip waveguides effectively suppresses the sidelobes.The filter possesses features of simultaneous wavelength tuning with no free spectral range(FSR)limitation.A maximum bandwidth of 10 nm was experimentally measured with a high out-of-band contrast of 25 dB.Similarly,the minimum bandwidth recorded is 4 nm with an out-of-band contrast of 15 dB.

Monolithic integration of embedded Ⅲ-Ⅴ lasers on SOI

Silicon photonic integration has gained great success in many application fields owing to the excellent optical device properties and complementary metal-oxide semiconductor(CMOS)compatibility.Realizing monolithic integration of Ⅲ-Ⅴ lasers and silicon photonic components on single silicon wafer is recognized as a long-standing obstacle for ultradense photonic integration,which can provide considerable economical,energy-efficient and foundry-scalable onchip light sources,that has not been reported yet.Here,we demonstrate embedded InAs/GaAs quantum dot(QD)lasers directly grown on trenched silicon-on-insulator(SOI)substrate,enabling monolithic integration with buttcoupled silicon waveguides.By utilizing the patterned grating structures inside pre-defined SOI trenches and unique epitaxial method via hybrid molecular beam epitaxy(MBE),high-performance embedded InAs QD lasers with monolithically out-coupled silicon waveguide are achieved on such template.By resolving the epitaxy and fabrication challenges in such monolithic integrated architecture,embedded Ⅲ-Ⅴ lasers on SOI with continuous-wave lasing up to 85°C are obtained.The maximum output power of 6.8mW can be measured from the end tip of the butt-coupled silicon waveguides,with estimated coupling efficiency of approximately-6.7 dB.The results presented here provide a scalable and low-cost epitaxial method for the realization of on-chip light sources directly coupling to the silicon photonic components for future high-density photonic integration.

A Physically Based Dynamic Recrystallization Model Considering Orientation Effects for a Nitrogen Alloyed Ultralow Carbon Stainless Steel during Hot Forging

The nitrogen alloyed ultralow carbon stainless steel is a good candidate material for primary loop pipes of AP1000 nuclear power plant. These pipes arc manufactured by hot forging, during which dynamic recrystallization acts as the most important microstructural evolution mechanism. A physically based model was proposed to describe and predict the microstructural evolution in the hot forging process of those pipes. In this model, the coupled effects of dislocation density change, dynamic recovery, dynamic recrystallization and grain orientation function were con sidered. Besides, physically based simulation experiments were conducted on a Gleeble 3500 thermo-mcchanical sire ulator, and the specimens after deformation were observed by optical metallography （OM） and clectron back scat toted diffraction （EBSD） method. The results confirm that dynamic recrystallization is easy to occur with increasing deformation temperature or strain rate. The grains become much finer after full dynamic recrystallization. The model shows a good agreement with experimental results obtained by OM and EBSD in terms of stress strain curves, grain size, and recrystallization kinetics. Besides, this model obtains an acceptable accuracy and a wide applying scope for engineering calculation.