BACKGROUND The development of biodegradable surgical staples is desirable as non-biodegradable Ti alloy staples reside in the human body long after wound healing, which can cause allergic/foreign-body reactions, adhes...BACKGROUND The development of biodegradable surgical staples is desirable as non-biodegradable Ti alloy staples reside in the human body long after wound healing, which can cause allergic/foreign-body reactions, adhesion, or other adverse effects. In order to develop a biodegradable alloy suitable for the fabrication of surgical staples, we hypothesized that Zn, a known biodegradable metal, could be alloyed with various elements to improve the mechanical properties while retaining biodegradability and biocompatibility. Considering their biocompatibility, Mg, Ca, Mn, and Cu were selected as candidate alloying elements, alongside Ti, the main material of clinically available surgical staples.AIM To investigate the in vitro mechanical properties and degradation behavior and in vivo safety and feasibility of biodegradable Zn alloy staples.METHODS Tensile and bending tests were conducted to evaluate the mechanical properties of binary Zn alloys with 0.1–6 wt.% Mg, Ca, Mn, Cu, or Ti. Based on the results,three promising Zn alloy compositions were devised for staple applications(wt.%): Zn-1.0Cu-0.2Mn-0.1Ti(Zn alloy 1), Zn-1.0Mn-0.1Ti(Zn alloy 2), and Zn-1.0Cu-0.1Ti(Zn alloy 3). Immersion tests were performed at 37℃ for 4 wk using fed-state simulated intestinal fluid(Fe SSIF) and Hank’s balanced salt solution(HBSS). The corrosion rate was estimated from the weight loss of staples during immersion. Nine rabbits were subjected to gastric resection using each Zn alloy staple, and a clinically available Ti staple was used for another group of nine rabbits. Three in each group were sacrificed at 1, 4, and 12 wk post-operation.RESULTS Additions of ≤1 wt.% Mn or Cu and 0.1 wt.% Ti improved the yield strength without excessive deterioration of elongation or bendability. Immersion tests revealed no gas evolution or staple fracture in any of the Zn alloy staples. The corrosion rates of Zn alloy staples 1, 2, and 3 were 0.02 mm/year in HBSS and 0.12, 0.11, and 0.13 mm/year, respectively, in Fe SSIF. These degradation times are sufficient for wound healing. The degradation rate is notably increased under low pH conditions. Scanning electron microscopy and energy dispersive spectrometry surface analyses of the staples after immersion indicated that the component elements eluted as ions in Fe SSIF, whereas corrosion products were produced in HBSS, inhibiting Zn dissolution. In the animal study, none of the Zn alloy staples caused technical failure, and all rabbits survived without complications. Histopathological analysis revealed no severe inflammatory reaction around the Zn alloy staples.CONCLUSION Staples made of Zn-1.0Cu-0.2Mn-0.1Ti, Zn-1.0Mn-0.1Ti, and Zn-1.0Cu-0.1Ti exhibit acceptable in vitro mechanical properties, proper degradation behavior,and in vivo safety and feasibility. They are promising candidates for biodegradable staples.展开更多
Hepatoblastoma is the most common type of malignant liver tumor in children and occurs most frequently in patients two years of age and younger. The outcomes for children with hepatoblastoma have been improving in rec...Hepatoblastoma is the most common type of malignant liver tumor in children and occurs most frequently in patients two years of age and younger. The outcomes for children with hepatoblastoma have been improving in recent years due to the introduction of cisplatin-based chemotherapy regimens. Recently, performing liver transplantation after neoadjuvant chemotherapy has become increasingly advocated as a primary surgical treatment for children with unresectable hepatoblastoma involving three or four sectors of the liver. Surgical exploration is frequently required to determine which tumors are resectable, which require liver transplantation and timing of resection. When the quality of the remnant liver is in question, the decision for transplantation versus resection should be made by a liver team in experienced center with capability of liver transplantation. This report presents the findings of the patient with hepatoblastoma who successfully underwent extreme resection with a backup for living donor liver transplantation. The patient was discharged home in good condition and the follow-up continued for three years with normal AFP levels observed.展开更多
文摘BACKGROUND The development of biodegradable surgical staples is desirable as non-biodegradable Ti alloy staples reside in the human body long after wound healing, which can cause allergic/foreign-body reactions, adhesion, or other adverse effects. In order to develop a biodegradable alloy suitable for the fabrication of surgical staples, we hypothesized that Zn, a known biodegradable metal, could be alloyed with various elements to improve the mechanical properties while retaining biodegradability and biocompatibility. Considering their biocompatibility, Mg, Ca, Mn, and Cu were selected as candidate alloying elements, alongside Ti, the main material of clinically available surgical staples.AIM To investigate the in vitro mechanical properties and degradation behavior and in vivo safety and feasibility of biodegradable Zn alloy staples.METHODS Tensile and bending tests were conducted to evaluate the mechanical properties of binary Zn alloys with 0.1–6 wt.% Mg, Ca, Mn, Cu, or Ti. Based on the results,three promising Zn alloy compositions were devised for staple applications(wt.%): Zn-1.0Cu-0.2Mn-0.1Ti(Zn alloy 1), Zn-1.0Mn-0.1Ti(Zn alloy 2), and Zn-1.0Cu-0.1Ti(Zn alloy 3). Immersion tests were performed at 37℃ for 4 wk using fed-state simulated intestinal fluid(Fe SSIF) and Hank’s balanced salt solution(HBSS). The corrosion rate was estimated from the weight loss of staples during immersion. Nine rabbits were subjected to gastric resection using each Zn alloy staple, and a clinically available Ti staple was used for another group of nine rabbits. Three in each group were sacrificed at 1, 4, and 12 wk post-operation.RESULTS Additions of ≤1 wt.% Mn or Cu and 0.1 wt.% Ti improved the yield strength without excessive deterioration of elongation or bendability. Immersion tests revealed no gas evolution or staple fracture in any of the Zn alloy staples. The corrosion rates of Zn alloy staples 1, 2, and 3 were 0.02 mm/year in HBSS and 0.12, 0.11, and 0.13 mm/year, respectively, in Fe SSIF. These degradation times are sufficient for wound healing. The degradation rate is notably increased under low pH conditions. Scanning electron microscopy and energy dispersive spectrometry surface analyses of the staples after immersion indicated that the component elements eluted as ions in Fe SSIF, whereas corrosion products were produced in HBSS, inhibiting Zn dissolution. In the animal study, none of the Zn alloy staples caused technical failure, and all rabbits survived without complications. Histopathological analysis revealed no severe inflammatory reaction around the Zn alloy staples.CONCLUSION Staples made of Zn-1.0Cu-0.2Mn-0.1Ti, Zn-1.0Mn-0.1Ti, and Zn-1.0Cu-0.1Ti exhibit acceptable in vitro mechanical properties, proper degradation behavior,and in vivo safety and feasibility. They are promising candidates for biodegradable staples.
文摘Hepatoblastoma is the most common type of malignant liver tumor in children and occurs most frequently in patients two years of age and younger. The outcomes for children with hepatoblastoma have been improving in recent years due to the introduction of cisplatin-based chemotherapy regimens. Recently, performing liver transplantation after neoadjuvant chemotherapy has become increasingly advocated as a primary surgical treatment for children with unresectable hepatoblastoma involving three or four sectors of the liver. Surgical exploration is frequently required to determine which tumors are resectable, which require liver transplantation and timing of resection. When the quality of the remnant liver is in question, the decision for transplantation versus resection should be made by a liver team in experienced center with capability of liver transplantation. This report presents the findings of the patient with hepatoblastoma who successfully underwent extreme resection with a backup for living donor liver transplantation. The patient was discharged home in good condition and the follow-up continued for three years with normal AFP levels observed.
