Compact 5G Vivaldi Tapered Slot Filtering Antenna with Enhanced Bandwidth

Compact fifth-generation(5G)low-frequency band filtering antennas(filtennas)with stable directive radiation patterns,improved bandwidth(BW),and gain are designed,fabricated,and tested in this research.The proposed filtennas are achieved by combining the predesigned compact 5G(5.975–7.125 GHz)third-order uniform and non-uniform transmission line hairpin bandpass filters(UTL and NTL HPBFs)with the compact ultrawide band Vivaldi tapered slot antenna(UWB VTSA)in one module.The objective of this integration is to enhance the performance of 5.975–7.125GHz filtennas which will be suitable for modern mobile communication applications by exploiting the benefits of UWB VTSA.Based on NTL HPBF,more space is provided to add the direct current(DC)biassing circuits in cognitive radio networks(CRNs)for frequency reconfigurable applications.To overcome the mismatch between HPBFs and VTSA,detailed parametric studies are presented.Computer simulation technology(CST)software is used for the simulation in this study.Good measured S11 appeared to be<−13 and<−10.54 dB at 5.48–7.73 and 5.9–7.98GHz with peak realized gains of 6.37 and 6.27 dBi,for VTSA with UTL and NTL HPBFs,respectively which outperforms the predesigned filters.Validation is carried out by comparing the measured and simulated results.

Ultra-Wideband Annular Ring Fed Rectangular Dielectric Resonator Antenna for Millimeter Wave 5G Applications

In this article an ultra-wideband rectangular Dielectric Resonator Antenna is designed for millimeter wave 5G frequency band applications.Indoor 5G communications require antenna system with wide bandwidth and high efficiency to enhance the throughput in the channel.To fulfill such requirements a Dielectric Resonator Antenna(DRA)is designed here which has achieved an ultra-wide bandwidth of 20.15%(22.32–27.56 GHz)which is 5.24 GHz of bandwidth centered at 26 GHz as resonating frequency.This covers the complete band 30(24.3–27.5 GHz)of 5G spectrum.26 and 28 GHz are considered as most popular frequencies in millimeter wave 5G communications.The aperture fed DRA designed here has also achieved an efficiency of 96 percentage with maximum radiation in the broadside direction(Phi=0,Theta=0).The measured gain of the DRA is 6.3 dB.The DRA designed here has dimensions of 0.25λ0×0.22λ0×0.12λ0.under the characteristic’s mode.The DRA is placed over a substrate with dimensions 0.5λ0×0.5λ0×0.02λ0.A cross slot aperture has been made on the ground plane which is placed above to the substrate.Here a full ground plane is used to resonate the antenna and is of similar dimension to the substrate.A microstrip line with two concentric rings makes an annular feed structure is used to excite the DRA and is placed below the substrate.The DRA is excited here in characteristics mode TE1Y1 and is the only mode of excitation.The DRA is linearly polarized,and the characteristic mode of excitation is maintained with 50 Ohm input impedance of the antenna.The DRA also gives here a good difference between the co-pol and cross pol approximately 15 to 20 dB.This antenna is more suitable for 5G indoor applications in millimeter wave frequency band centered at 26 GHz.