Soil fixation and erosion control by Haloxylon persicum roots in arid lands, Iran

Vegetation roots contribute to soil fixation and reinforcement, thus improving soil resistance against erosion. Generally, the amount of soil fixation presented by roots mainly depends on root density and tensile strength. In the present study, we conducted the research in order to further understand the biotechnical properties of Haloxylon persicum and also to quantify its role in increasing soil cohesion in arid lands of Iran. Ten H. persicum shrubs were randomly selected for root distribution and strength investigations, in which five samples were set on flat terrain and other five samples on a moderate slope terrain. The profile trench method was used to assess the root area ratio(RAR) as the index of root density and distribution. Two profiles were dug around each sample, up and downslope for sloped treatment and north and south sides for flat treatment. The results showed that RAR increased with increasing soil depth and significantly decreased in 40–50 cm layers of downhill(0.320%) and 50–60 cm for uphill(0.210%). The minimum values for the northward and southward profiles were 0.003% and 0.003%, respectively, while the maximum values were 0.260% and 0.040%, respectively. The relationship between the diameter of root samples and root tensile strength followed a negative power function, but tensile force increased with increasing root diameter following a positive power function. The pattern of increased cohesion changes in soil profile was relatively similar to RAR curves. The maximum increased cohesion due to the presence of roots in uphill and downhill sides were 0.470 and 1.400 kPa, respectively. In the flat treatment, the maximum increased cohesions were 0.570 and 0.610 kPa in northward and southward profiles, respectively. The analysis of variance showed that wind and slope induced stresses did not have any significant effect on the amount of increased cohesion of H. persicum. The findings served to develop knowledge about biotechnical properties of H. persicum root system that can assist in assessing the efficiency of afforestation and restoration measures for erosion control in arid lands.

How does organic matter affect the physical and mechanical properties of forest soil?

Determining the physical and mechanical properties of soil and its behavior for engineering projects is essential for road construction operations. One of the most important principles in forest road construction, which is usually neglected, is to avoid mixing organic matter with road materials during excavation and embankment construction. The current study aimed to assess the influence of organic matter on the physical properties and mechanical behaviors of forest soil and to analyze the relation between the amount of organic matter and the behavior of forest soil as road material. A typical soil sample from the study area was collected beside a newly constructed roadbed. The soil was mixed with different percentages of organic matter（control treatment, 5, 10, and 15% by mass） and different tests including Atterberg limits, standard compaction, and California bearing ratio（CBR） tests were conducted on these different soil mixtures. The results showed that soil plasticity increased linearly with increasing organic matter.Increasing the organic matter from 0%（control） to 15%resulted in an increase of 11.64% of the plastic limit and 15.22% of the liquid limit after drying at 110 ℃. Also,increasing the organic matter content reduced the soil maximum dry density and increased the optimum moisture content. Increasing the organic matter from 0 to 15% resulted in an increase of 11.0% of the optimum moisture content and a decrease of 0.29 g/cm;of the maximum dry density. Organic matter decreased the CBR, which is used as the index of road strength. Adding 15% organic matter to the soil resulted in a decrease of the CBR from 15.72 to 4.75%. There was a significant difference between the two drying temperatures（60 and 110 ℃） for the same organic matter mixtures with lower water content values after drying at 60 ℃. The results revealed the adverse influence of organic matter on soil engineering properties and showed the importance of organic matter removal before excavation and fill construction.