Experimental investigation into fabrication of microfeatures on titanium by electrochemical micromachining

Titanium machining is one of the challenging tasks to modem machining processes. Especially fabricat- ing microfeatures on titanium appear as a potential research interest. Electrochemical micromachining （EMM） is an effective process to generate microfeatures by anodic dis- solution. Machining of titanium by anodic dissolution is different than other metals because of its tendency to form passive oxide layer. The phenomenon of progression of microfeature by conversion of passive oxide layer into transpassive has been investigated with the help of mask- less EMM technique. Suitable range of machining voltage has been established to attain the controlled anodic disso- lution of titanium by converting passive oxide film of titanium into transpassive with nonaqueous electrolyte. The experimental outcomes revealed that the micromachining of titanium with controlled anodic dissolution could be possible even at lower machining voltage in the range of 6-8 V. This work successfully explored the possibility of generation of microfeatures on commercially pure titanium by anodic dissolution process in microscopic domain by demonstrating successful fabrication of various microfea- tures, such as microholes and microcantilevers.

Investigation on surface structuring generated by electrochemical micromachining

Surface geometrical features and their function- ality depend on the manufacturing process which is employed for fabrication of surface structures. Maskless electrochemical micromachining （EMM） is used to generate various surface structures for diminishing and controlling friction and wear to increase the lifetime, reliability, and efficiency of mechanical systems. This paper presents a method for the generation of structured surfaces on stainless steel （SS-304） surfaces by using maskless EMM. The micropatterned tool is composed of 800 μm diameter circular holes in a 5 × 5 matrix form. The indigenously developed EMM set up consists of an EMM cell, electrical power supply system, and a controlled vertical cross-flow electrolyte circulation arrangement to control the influence of process parameters during the generation of the micro features of structured surfaces. The single structured cathode tool is used for the mass production of structured surfaces with a short fabrication time in the industrial context by avoiding the use of an individual masking process for each workpiece. The process has been characterized in terms of the effects of predominant process parameters such as machining voltage, electrolyte concentration, duty ratio, pulsed frequency, and machining time on the machined surface characteristics such as current efficiency, machining accuracy, and depth of the circular pattern on the stainless steel surfaces. A mathematical model is also developed to determine the theoretical depth of the dimple pattern and correlate the theoretical depths with actual depths as obtained by experimentation. Moreover, an effort has been made to study the structuringcharacteristics on the basis of micrographs obtained duringthe EMM.