Purpose Back-n is a white neutron beamline at China spallation neutron source,which was established in the year of 2018.It is a powerful facility for nuclear data measurement,neutron detector calibration,and radiation...Purpose Back-n is a white neutron beamline at China spallation neutron source,which was established in the year of 2018.It is a powerful facility for nuclear data measurement,neutron detector calibration,and radiation effect research.Method A series of detectors were built for different experiments,including beam monitoring,beam profile measurement,neutron induced secondaries(fission fragments,light charged particles and gamma)cross section measurement,and neutron resonance radiography,etc.A common digitization electronics and a cluster-based DAQ were developed for these detector systems.Most detectors have been employed at Back-n and serviced for experiments from the beginning of the beamline running.Results and conclusion As an overview of detectors of Back-n,the details of the detector design and the experiment performing are described in this paper.Some developing systems,e.g.,MTPC and B-MCP,are also included.展开更多
This paper seeks to outline the temperature effect on the buckling properties of ultra-thin-walled lenticular collapsible composite tube（LCCT） subjected to axial compression.The buckling tests of the LCCT specimens ...This paper seeks to outline the temperature effect on the buckling properties of ultra-thin-walled lenticular collapsible composite tube（LCCT） subjected to axial compression.The buckling tests of the LCCT specimens subjected to axial compression were carried out on INSTRON-500 N servo-hydraulic machine in dry state and at the temperatures of 25 C, 100 C and 80 C. The load–displacement curves and buckling initiation loads were measured and the buckling initiation mechanism was discussed from experimental observations. Experiments show that the buckling initiation load, on average, is only about 2.2% greater at the low temperature of 80 C than at the room temperature of 25 C due to the material hardening, demonstrating an insignificant increase in the buckling initiation load, whereas it is about 19.5% lower at the high temperature of 100 C than at the room temperature owing to the material softening, implying a significant decrease in the buckling initiation load. The failure mode of the LCCT in axial compression tests at three different temperatures can be reckoned to be characteristic of the buckling initiation and propagation around the central region until rupture. The finite element（FE） model is presented to simulate the buckling initiation mechanism based on the eigenvalue-based methodology. Good correlation between experimental and numerical results is achieved.展开更多
This paper proposes a new analytical solution to predict the shear modulus of a two-dimensional（2D） plain weave fabric（PWF） composite accounting for the interaction of orthogonal interlacing strands with coupled s...This paper proposes a new analytical solution to predict the shear modulus of a two-dimensional（2D） plain weave fabric（PWF） composite accounting for the interaction of orthogonal interlacing strands with coupled shear deformation modes including not only relative bending but also torsion,etc.The two orthogonal yarns in a micromechanical unit cell are idealized as curved beams with a path depicted by using sinusoidal shape functions.The internal forces and macroscopic deformations carried by the yarn families,together with macroscopic shear modulus of PWFs are derived by means of a strain energy approach founded on micromechanics.Three sets of experimental data pertinent to three kinds of 2D orthogonal PWF composites have been implemented to validate the new model.The calculations from the new model are also compared with those by using two models in the earlier literature.It is shown that the experimental results correlate well with predictions from the new model.展开更多
基金support provided by the National KeyR&DProgram of China(Grant No.2016YFA0401600).
文摘Purpose Back-n is a white neutron beamline at China spallation neutron source,which was established in the year of 2018.It is a powerful facility for nuclear data measurement,neutron detector calibration,and radiation effect research.Method A series of detectors were built for different experiments,including beam monitoring,beam profile measurement,neutron induced secondaries(fission fragments,light charged particles and gamma)cross section measurement,and neutron resonance radiography,etc.A common digitization electronics and a cluster-based DAQ were developed for these detector systems.Most detectors have been employed at Back-n and serviced for experiments from the beginning of the beamline running.Results and conclusion As an overview of detectors of Back-n,the details of the detector design and the experiment performing are described in this paper.Some developing systems,e.g.,MTPC and B-MCP,are also included.
基金supported by the National Natural Science Foundation of China (Nos. 51075019 and 51375033)Aeronautical Science Foundation (No. 20095251024) of Chinathe Fundamental Research Funds for the Central Universities (No. YWF-13-T-RSC-121) of China
文摘This paper seeks to outline the temperature effect on the buckling properties of ultra-thin-walled lenticular collapsible composite tube（LCCT） subjected to axial compression.The buckling tests of the LCCT specimens subjected to axial compression were carried out on INSTRON-500 N servo-hydraulic machine in dry state and at the temperatures of 25 C, 100 C and 80 C. The load–displacement curves and buckling initiation loads were measured and the buckling initiation mechanism was discussed from experimental observations. Experiments show that the buckling initiation load, on average, is only about 2.2% greater at the low temperature of 80 C than at the room temperature of 25 C due to the material hardening, demonstrating an insignificant increase in the buckling initiation load, whereas it is about 19.5% lower at the high temperature of 100 C than at the room temperature owing to the material softening, implying a significant decrease in the buckling initiation load. The failure mode of the LCCT in axial compression tests at three different temperatures can be reckoned to be characteristic of the buckling initiation and propagation around the central region until rupture. The finite element（FE） model is presented to simulate the buckling initiation mechanism based on the eigenvalue-based methodology. Good correlation between experimental and numerical results is achieved.
基金National Natural Science Foundation of China(51075019)Aeronautical Science Foundation of China (20095251024)
文摘This paper proposes a new analytical solution to predict the shear modulus of a two-dimensional（2D） plain weave fabric（PWF） composite accounting for the interaction of orthogonal interlacing strands with coupled shear deformation modes including not only relative bending but also torsion,etc.The two orthogonal yarns in a micromechanical unit cell are idealized as curved beams with a path depicted by using sinusoidal shape functions.The internal forces and macroscopic deformations carried by the yarn families,together with macroscopic shear modulus of PWFs are derived by means of a strain energy approach founded on micromechanics.Three sets of experimental data pertinent to three kinds of 2D orthogonal PWF composites have been implemented to validate the new model.The calculations from the new model are also compared with those by using two models in the earlier literature.It is shown that the experimental results correlate well with predictions from the new model.
