Four types of magnetic alloy cores,labeled as V1,V2,A1 and A2,were produced by Liyuan Corp.Ltd.,for the radio frequency compression cavity of HIRFL-CSRm.In this work,their permeability,quality factor (Q value) and shu...Four types of magnetic alloy cores,labeled as V1,V2,A1 and A2,were produced by Liyuan Corp.Ltd.,for the radio frequency compression cavity of HIRFL-CSRm.In this work,their permeability,quality factor (Q value) and shunt impedance were measured before installing them into the cavity.The results show that the V1,V2 and A2 have higher permeability and shunt impedance,and lower Q value,and are suitable to the radio frequency compression cavity.展开更多
The operational frequency range of RF system at HIRFL-CSRe (cooling storage experimental ring) is 0.5-2 MHz, and it works in fundamental and second harmonic. It includes five sections: ferrite ring loaded RF cavity, R...The operational frequency range of RF system at HIRFL-CSRe (cooling storage experimental ring) is 0.5-2 MHz, and it works in fundamental and second harmonic. It includes five sections: ferrite ring loaded RF cavity, RF generator, low-level system, computer system and cavity cooling. The cavity is based on the coaxial resonator type which is short at the terminal with one gap and loaded with domestic ferrite rings. The RF generator is designed in a push-pull mode. The low-level control system is based on PID, DSP, FPGA and DDS9854+USB interface and has three feedback loops. This RF system is designed independently and manufactured domestically. For the first time, it realized the pulse modulation, variable harmonic and CW operational modes. The maximum output power is up to 70 kW and the 10 kV RF voltage is used to capture the irradiative beam and decelerate the beam from 400 to 30 MeV/u.展开更多
基金Supported by Innovation Research Community of National Natural Science Foundation of China(10921504)
文摘Four types of magnetic alloy cores,labeled as V1,V2,A1 and A2,were produced by Liyuan Corp.Ltd.,for the radio frequency compression cavity of HIRFL-CSRm.In this work,their permeability,quality factor (Q value) and shunt impedance were measured before installing them into the cavity.The results show that the V1,V2 and A2 have higher permeability and shunt impedance,and lower Q value,and are suitable to the radio frequency compression cavity.
文摘The operational frequency range of RF system at HIRFL-CSRe (cooling storage experimental ring) is 0.5-2 MHz, and it works in fundamental and second harmonic. It includes five sections: ferrite ring loaded RF cavity, RF generator, low-level system, computer system and cavity cooling. The cavity is based on the coaxial resonator type which is short at the terminal with one gap and loaded with domestic ferrite rings. The RF generator is designed in a push-pull mode. The low-level control system is based on PID, DSP, FPGA and DDS9854+USB interface and has three feedback loops. This RF system is designed independently and manufactured domestically. For the first time, it realized the pulse modulation, variable harmonic and CW operational modes. The maximum output power is up to 70 kW and the 10 kV RF voltage is used to capture the irradiative beam and decelerate the beam from 400 to 30 MeV/u.
