Intraocular lenses can be manufactured from a wide variety of polymers, but due to the lost cost associated with the use of Poly (methyl methacrylate) (PMMA), it is still the preferred material used in the developing ...Intraocular lenses can be manufactured from a wide variety of polymers, but due to the lost cost associated with the use of Poly (methyl methacrylate) (PMMA), it is still the preferred material used in the developing countries. However, a major drawback to its use is the build-up of calcium containing deposits that are formed on the intraocular lens over a period of time. In an attempt to hinder this deposition, surface modification of medical grade PMMA has been carried out using perfluoroalkyl chain (1,2,4-trifluoro-3-(C10F21CH2O)-7-(N,N)-dimethylaminoacridine) segregation. The segregation was explored using a 1% 1,2,4-trifluoro-3-(C10F21CH2O)-7-(N,N)-dimethyla-minoacridine in two methods: film casting and spin-coating, a thin film onto preformed PMMA discs. Both methods were compared against control PMMA to determine which method provided the best hindrance against calcium containing deposits when immersed in a simulated aqueous humour solution. Characterisation of the surface using scanning electron microscopy coupled with energy;dispersive x-ray analysis indicated that the surface segregation of perfluoroalkyl chains had hindered calcification in both methods. This pleminary research shows promising results of employing perfluoroalkyl chains in the surface segregation of biomaterials that can be employed in intraocular lenses.展开更多
Medical-grade poly(methyl methacrylate) (PMMA) is extensively employed in the fabrication of a variety of medical implants, including intraocular lenses (IOLs). However, a postoperative complication that leads to the ...Medical-grade poly(methyl methacrylate) (PMMA) is extensively employed in the fabrication of a variety of medical implants, including intraocular lenses (IOLs). However, a postoperative complication that leads to the failure of the implanted intraocular lenses has been recently identified. This process, termed calcification, occurs when calcium-containing deposits accumulate on the surface of the IOL. In this study direct gas fluorination was used to modify the surface of PMMA in an attempt to increase the service lifetime of the material in optical applications. PMMA discs exposed to a 20% fluorine/nitrogen gas mixture for 24 h were compared with untreated PMMA discs serving as control samples. Over time, both surface-fluorinated and untreated PMMA samples immersed in a simulated aqueous humour solution (SAHS) (pH 7.4, 35°C) were used to carry out in vitro studies. Attenuated total refractive Infrared spectroscopy (ATR-IR) Scanning electron microscopy (SEM), coupled with Energy dispersive X-ray analysis (EDX), showed that calcium-containing surface deposits were less abundant on surface-fluorinated PMMA compared with the control samples, indicating that the fluorinated surface was acting as a barrier to the deposits. Gravimetric analysis data showed that the decreased rate of diffusion compared with that of a control sample was due to the fluorinated surface.展开更多
文摘Intraocular lenses can be manufactured from a wide variety of polymers, but due to the lost cost associated with the use of Poly (methyl methacrylate) (PMMA), it is still the preferred material used in the developing countries. However, a major drawback to its use is the build-up of calcium containing deposits that are formed on the intraocular lens over a period of time. In an attempt to hinder this deposition, surface modification of medical grade PMMA has been carried out using perfluoroalkyl chain (1,2,4-trifluoro-3-(C10F21CH2O)-7-(N,N)-dimethylaminoacridine) segregation. The segregation was explored using a 1% 1,2,4-trifluoro-3-(C10F21CH2O)-7-(N,N)-dimethyla-minoacridine in two methods: film casting and spin-coating, a thin film onto preformed PMMA discs. Both methods were compared against control PMMA to determine which method provided the best hindrance against calcium containing deposits when immersed in a simulated aqueous humour solution. Characterisation of the surface using scanning electron microscopy coupled with energy;dispersive x-ray analysis indicated that the surface segregation of perfluoroalkyl chains had hindered calcification in both methods. This pleminary research shows promising results of employing perfluoroalkyl chains in the surface segregation of biomaterials that can be employed in intraocular lenses.
文摘Medical-grade poly(methyl methacrylate) (PMMA) is extensively employed in the fabrication of a variety of medical implants, including intraocular lenses (IOLs). However, a postoperative complication that leads to the failure of the implanted intraocular lenses has been recently identified. This process, termed calcification, occurs when calcium-containing deposits accumulate on the surface of the IOL. In this study direct gas fluorination was used to modify the surface of PMMA in an attempt to increase the service lifetime of the material in optical applications. PMMA discs exposed to a 20% fluorine/nitrogen gas mixture for 24 h were compared with untreated PMMA discs serving as control samples. Over time, both surface-fluorinated and untreated PMMA samples immersed in a simulated aqueous humour solution (SAHS) (pH 7.4, 35°C) were used to carry out in vitro studies. Attenuated total refractive Infrared spectroscopy (ATR-IR) Scanning electron microscopy (SEM), coupled with Energy dispersive X-ray analysis (EDX), showed that calcium-containing surface deposits were less abundant on surface-fluorinated PMMA compared with the control samples, indicating that the fluorinated surface was acting as a barrier to the deposits. Gravimetric analysis data showed that the decreased rate of diffusion compared with that of a control sample was due to the fluorinated surface.
