In this research,the effect of the sintering and cooling process on geometry distortion and mechanical properties of PTFE/Al reactive material is investigated.Six particularly selected sintering temperatures,three dif...In this research,the effect of the sintering and cooling process on geometry distortion and mechanical properties of PTFE/Al reactive material is investigated.Six particularly selected sintering temperatures,three different cooling modes(annealing cooling,normalizing cooling and rapid cooling),three different initial cooling temperature s,as well as six different final cooling temperatures were designed to compare the effects of sintering temperature,cooling rate,initial cooling temperature and final cooling temperature on the properties of reactive materials.Geometry distortion was quantitatively analyzed by a statistic on the dimensional changes of the specimens and microscopic morphology.A mechanical response properties transition from brittle to ductile was found and analyzed.By combining the thermodynamic properties of PTFE and unsteady heat conduction theory,mechanisms of cooling induced morphology change,temperature induced distortion and strength decrease were obtained.The results showed that the cooling rate has the most significant effect on the morphology transformation,while initial cooling temperature has more significant effect on the dimensional distortion than final cooling temperature.As to the mechanical properties transition from brittle to plastic,a more prominent effect of initial cooling temperature than cooling rate and final temperature was revealed.展开更多
基金The authors are very grateful for the support received from the National Natural Science Foundation of China(No.11202030)State Key Laboratory of the State Key Laboratory of Explosion Science and Technology(QNKT19-03).
文摘In this research,the effect of the sintering and cooling process on geometry distortion and mechanical properties of PTFE/Al reactive material is investigated.Six particularly selected sintering temperatures,three different cooling modes(annealing cooling,normalizing cooling and rapid cooling),three different initial cooling temperature s,as well as six different final cooling temperatures were designed to compare the effects of sintering temperature,cooling rate,initial cooling temperature and final cooling temperature on the properties of reactive materials.Geometry distortion was quantitatively analyzed by a statistic on the dimensional changes of the specimens and microscopic morphology.A mechanical response properties transition from brittle to ductile was found and analyzed.By combining the thermodynamic properties of PTFE and unsteady heat conduction theory,mechanisms of cooling induced morphology change,temperature induced distortion and strength decrease were obtained.The results showed that the cooling rate has the most significant effect on the morphology transformation,while initial cooling temperature has more significant effect on the dimensional distortion than final cooling temperature.As to the mechanical properties transition from brittle to plastic,a more prominent effect of initial cooling temperature than cooling rate and final temperature was revealed.
