期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Swelling-induced morpholine functionalized adamantane-containing poly(aryl ether ketone)membranes for vanadium flow batteries
1
作者 bengui zhang Xueting zhang +8 位作者 Qian Liu Minghui Zhao Zhirong Yang Yanshi Fu Enlei zhang Kangjun Wang Guosheng Wang Zhigang zhang Shouhai zhang 《Resources Chemicals and Materials》 2022年第3期268-274,共7页
Swelling-induced morpholine functionalized adamantane-containing poly(aryl ether ketone) (MAPEK) membranes were prepared for vanadium flow batteries. MAPEK membranes were prepared from chloromethylated polymer and mor... Swelling-induced morpholine functionalized adamantane-containing poly(aryl ether ketone) (MAPEK) membranes were prepared for vanadium flow batteries. MAPEK membranes were prepared from chloromethylated polymer and morpholine and further swelling-induced with hot phosphoric acid to obtain membranes with enhanced ionic conductivity. The swelling, selectivity, and ionic conductivity of MAPEK membranes were regulated by varying the swelling temperature. Selective swelling-induced microphase separation in MAPEK membranes, forming wider ion transport pathways and resulting in low area resistance. The unique rigid adamantane-containing backbone limited the swelling of membranes. Consequently, MAPEK membranes showed excellent selectivity and conductivity (vanadium ion permeability coefficient of MAPEK membranes was lower than 3.82 × 0−7 cm2min−1) (Nafion212 membrane, 42.5 × 0−7 cm2min−1), and MAPEK-150 membrane exhibited low area resistance (0.17 Ωcm2). The vanadium flow batteries (VFB) with MAPEK-150 membrane exhibited high energy efficiency (91.1% at 80 mAcm−2, 81.4% at 200 mAcm−2). Furthermore, MAPEK membranes showed good stability in VFB and oxidative electrolytes. The swelling-induced method utilized in this work is a versatile and facile method to enhance the conductivity of ion-exchange membranes. 展开更多
关键词 Vanadium flow battery Energy storage Membrane Swelling-induced Conductivity
下载PDF
季铵化杂萘联苯聚芳醚酮酮离子交换膜制备与性能 被引量:1
2
作者 张守海 张本贵 +1 位作者 陈宇宁 蹇锡高 《科学通报》 EI CAS CSCD 北大核心 2019年第2期187-193,共7页
离子交换膜是全钒氧化还原液流电池的主要部件之一,其选择性和稳定性在一定程度上决定了电池的寿命,而目前大多数离子交换膜存在选择性或稳定性欠佳的状况.为了制备全钒氧化还原液流电池用高选择性离子交换膜,本文将不同溴甲基含量(0.75... 离子交换膜是全钒氧化还原液流电池的主要部件之一,其选择性和稳定性在一定程度上决定了电池的寿命,而目前大多数离子交换膜存在选择性或稳定性欠佳的状况.为了制备全钒氧化还原液流电池用高选择性离子交换膜,本文将不同溴甲基含量(0.75~0.99,平均每摩尔重复结构单元含有溴甲基的摩尔数)的含溴甲基杂萘联苯聚醚酮酮(BPPEKK)通过溶液浇铸法制备基膜,之后在三甲胺水溶液中进行胺化得到季铵化杂萘联苯聚醚酮酮阴离子交换膜(QBPPEKK).测试了QBPPEKK的离子交换容量、吸水率、溶胀率、钒渗透系数和面电阻.随着BPPEKK溴甲基含量的增加,所得QBPPEKK膜的离子交换容量和含水率增加,而其面电阻和钒离子质量传递系数降低.将QBPPEKK膜组装于全钒氧化还原液流电池中,电池的电压效率(VE)和能量效率(EE)随着QBPPEKK膜离子交换容量的增加而上升;当BPPEKK的取代度为0.99时,所制得的阴离子交换膜为QBPPEKK90膜,由其组装成电池的EE为87.7%(电流密度为40m A/cm^2),大于同条件下Nafion117的数值(86.0%).在1.5mol/L的VO_2^+溶液中浸泡60d后, QBPPEKK膜的拉伸强度高于36 MPa、膜表面形貌没有明显变化、组装电池性能变化不大,结果表明QBPPEKK膜在VO_2^+溶液中表现出良好的稳定性. 展开更多
关键词 杂萘联苯聚芳醚酮酮 溴甲基 季铵化 离子交换膜 钒电池
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部