A comparative study of the land-atmosphere energy and water exchanges over the Tibetan Plateau and the Yangtze River Region

正确认识不同区域能量和水分循环特征是研究局地地气相互作用及准确预测区域天气,气候变化的关键.为了研究属于干旱/半干旱气候的青藏高原(TP)和湿润/半湿润气候的长江流域(YRR)之间地表能量和水分交换的异同,本文对比分析了两个区域8个不同地表类型(包括高山荒漠,高山草地,(平原)城市和(平原)草地等)观测站点的地表辐射和能量通量数据.结果显示:(1)TP由于高原大气层稀薄且空气洁净,年平均入射短波辐射为251.3W m^(-2),是YRR的1.7倍.加之高原地表反照率高导致反射辐射(59.6 W m^(-2))是YRR的2.87倍.入射及出射的长波辐射为231.5和338.0 W m^(-2),分别为YRR的0.64和0.83.而两个区域的净辐射差异不大;(2)草地站更多的潜热释放使得地表总加热效率高于城市和高山荒漠,TP和YRR的草地站的年平均潜热分别为35.0和38.8 W m^(-2),而植被稀疏且土壤干燥的高山荒漠地区感热最大,年平均感热为42.1 W m^(-2);其次是城市下垫面,其年平均感热为37.7 W m^(-2).研究结果揭示了不同气候背景下典型下垫面地气相互作用特征,为地气相互作用过程深入分析奠定了基础.

Electronic transport evolution across the successive structural transitions in Ni_(50-x)Fe_xTi_(50) shape memory alloys

TiNi-based shape memory alloys have been extensively investigated due to their significant applications,but a comprehensive understanding of the evolution of electronic structure and electrical transport in a system with martensitic transformations(MT) is still lacking.In this work,we focused on the electronic transport behavior of three phases in Ni_(50-x)Fe_xTi_(50)across the MT.A phase diagram of Ni_(50-x)Fe_xTi_(50) was established based on x-ray diffraction,calorimetric,magnetic,and electrical measurements.To reveal the driving force of MT,phonon softening was revealed using first-principles calculations.Notably,the transverse and longitudinal transport behavior changed significantly across the phase transition,which can be attributed to the reconstruction of electronic structures.This work promotes the understanding of phase transitions and demonstrates the sensitivity of electron transport to phase transition.

TP-PROFILE: Monitoring the Thermodynamic Structure of the Troposphere over the Third Pole

Ground-based microwave radiometers(MWRs)operating in the K-and V-bands(20–60 GHz)can help us obtain temperature and humidity profiles in the troposphere.Aside from some soundings from local meteorological observatories,the tropospheric atmosphere over the Tibetan Plateau(TP)has never been continuously observed.As part of the Chinese Second Tibetan Plateau Scientific Expedition and Research Program(STEP),the Tibetan Plateau Atmospheric Profile(TPPROFILE)project aims to construct a comprehensive MWR troposphere observation network to study the synoptic processes and environmental changes on the TP.This initiative has collected three years of data from the MWR network.This paper introduces the data information,the data quality,and data downloading.Some applications of the data obtained from these MWRs were also demonstrated.Our comparisons of MWR against the nearest radiosonde observation demonstrate that the TP-PROFILE MWR system is adequate for monitoring the thermal and moisture variability of the troposphere over the TP.The continuous temperature and moisture profiles derived from the MWR data provide a unique perspective on the evolution of the thermodynamic structure associated with the heating of the TP.The TP-PROFILE project reveals that the low-temporal resolution instruments are prone to large uncertainties in their vapor estimation in the mountain valleys on the TP.

Quasi-coherent mode in core plasma of SUNIST spherical tokamak

A quasi-coherent(QC)mode was observed in the core region of low-density ohmic plasmas in Sino-UNIted Spherical Tokamak.In experiments on the QC mode,two sets of moveable Langmuir probes(LPs)were used to measure the local parameters including floating potential,electron temperature,electron density,and so on,as well as their profiles.To monitor the magnetohydrodynamic activities,a Mirnov probe was used to measure the poloidal magnetic fluctuation.The QC mode can be seen in the spectra of floating potential,but there is no similar peak in the spectra of magnetic fluctuation.Thus,the QC mode is probably electrostatic.By analyzing the electrostatic potential fluctuations from the LPs,the features of the QC mode including frequency,wavenumber,propagation direction,and dependence on collisionality are identified,which are consistent with the characteristics of dissipative trapped electron mode.

携带DCTN1基因突变的肌萎缩侧索硬化合并认知障碍1例

肌萎缩侧索硬化症(Amyotrophic lateral sclerosis,ALS)是一种选择性累及脊髓前角细胞、脑干运动神经核、皮质锥体细胞和锥体束,具有上和(或)下运动神经元损害的神经变性疾病。ALS是运动神经元病(Motor neuron disease,MND)中最常见的类型,由于ALS起病隐袭,病程长,进展缓慢,表现多样及预后差,早期诊断是干预和治疗的关键因素。本文报道1例ALS携带DCTN1基因突变合并帕金森综合征及认知障碍的病例,对其临床表现和遗传评估进行分析,有助于加深对ALS的识别。

Magnetocaloric properties and Griffiths phase of ferrimagnetic cobaltite CaBaCo_(4)O_(7)

We present a study on the magnetocaloric properties of a CaBaCo_(4)O_(7) polycrystalline cobaltite along with research on the nature of magnetic phase transition.The magnetization as a function of temperature identifies the ferrimagnetic to paramagnetic transition at a Curie temperature of 60 K.Moreover,a Griffiths-like phase is confirmed in a temperature range above T_(C).The compound undergoes a crossover from the first to second-order ferrimagnetic transformation,as evidenced by the Arrott plots,scaling of the universal entropy curve,and field-dependent magnetic entropy change.The maximum of entropy change is 3 J/kg⋅K for ΔH=7 T at T_(C),and a broadening of the entropy peak with increasing magnetic field indicates a field-induced transition above T_(C).The analysis of the magnetic entropy change using the Landau theory reveals the second-order phase transition and indicates that the magnetocaloric properties of CaBaCo_(4)O_(7) are dominated by the magnetoelastic coupling and electron interaction.The corresponding values of refrigerant capacity and relative cooling power are estimated to be 33 J/kg and 42 J/kg,respectively.

Structural Determination,Unstable Antiferromagnetism and Transport Properties of Fe-Kagome Y_(0.5)Fe_(3)Sn_(3) Single Crystals

Kagome materials have been studied intensively in condensed matter physics.With rich properties,various Kagome materials emerge during this process.Here,we grew single crystals of Y_(0.5)Fe_(3)Sn_(3)and confirmed an YCo_(6)Ge_(6)-type Kagome-lattice structure by detailed crystal structure characterizations.This compound bears an antiferromagnetic ordering at T_(N)= 551 K,and shows a weak ferromagnetism at low temperatures,where an anomalous Hall effect was observed,suggesting the non-zero Berry curvature.With the unstable antiferromagnetic ground state,our systematic investigations make Y_(0.5)Fe_(3)Sn_(3)a potential Kagome compound for Kagome or topological physics.

Existence of Positive Periodic Solutions for a Time-Delay Biological Model

Based on the classic Lotlk-Volterra cooperation model, we establish a time-delay model of which a species cannot survive independently. By continuation theorem, we discuss existence of positive periodic solutions of the model.

Virtual straightening of scraper conveyor based on the position and attitude solution of industrial robot model

The movement of the floating connecting mechanism between a hydraulic support and scraper conveyor is space movement;thus,when the hydraulic support pushes the scraper conveyor,there is an error between the actual distance of the scraper conveyor and the theoretical moving distance.As a result,the scraper conveyor cannot obtain the straightness requirement.Therefore,the movement law of the floating connecting mechanism between the hydraulic support and scraper conveyor is analyzed and programmed into the Unity3D to realize accurate pushing of the scraper conveyor via hydraulic support.The Coal Seam?Equipment Joint Virtual Straightening System is established,and a straightening method based on the motion law of a floating connection is proposed as the default method of the system.In addition,a straightening simulation of the scraper conveyor was performed on a complex coal seam floor,the results demonstrate that the average straightening error of the scraper conveyor is within 2-8 mm,and is in direct proportion to the fluctuation of the coal seam floor in the strike of the seam with high accuracy,the straightness of scraper conveyor is more affected by the subsidence terrain during straightening than by the bulge terrain.And some conclusions are verified by experiment.Based on the verification of the relevant conclusions,a comparison and analysis of Longwall Automation Steering Committee(LASC)straightening technology and default straightening method in the simulation system shows that the straightness accuracy of LASC straightening technology under complex floor conditions is slightly less than that of the default straightening method in the proposed system.

中国家族性胃癌的研究(英文)

Objective:The aim of the study was to investigate the influence of gastric cancer family history in the gastric cancer (GC) patients. Methods: Gastric cancer family histories within second degree relatives and clinicopathological features were obtained for 497 patients. Results:Of the 497 probands,235 probands were incorporated into familial gastric cancer (FGC) group (there were at least two GC members in the family); 262 probands were included in the non-FGC group (relatives only affected with non-GCs). Of 614 tumors in relatives,GC was the most frequent,followed by lung cancer,esophageal cancer,hepatocellular cancer,colorectal cancer,urogenital cancer,breast cancer,and pancreatic cancer. Most affected members aggregated within first-degree relatives. The ratio of males to females in affected first-degree relatives was usually higher in male probands. Paternal history of GC was a strong risk for GC in males,while risk of GC by maternal history of GCs was increased in females. Difference in tumor histological types between the two groups was derived from an excess of diffuse GC in non-FGC male probands. The lower site was the most frequent tumor location in all subgroups. Conclusion:Distribution of associated non-GCs in a family history of GC may vary with geographic areas. GC may have different genetic and/or environmental etiology in different families,and a certain subtype may be inherited in a male-influenced fashion.

Air Temperature Estimation with MODIS Data over the Northern Tibetan Plateau

Time series of MODIS land surface temperature(Ts) and normalized difference vegetation index(NDVI) products,combined with digital elevation model(DEM) and meteorological data from 2001 to 2012,were used to map the spatial distribution of monthly mean air temperature over the Northern Tibetan Plateau(NTP). A time series analysis and a regression analysis of monthly mean land surface temperature(Ts) and air temperature(Ta) were conducted using ordinary linear regression(OLR) and geographical weighted regression(GWR). The analyses showed that GWR,which considers MODIS Ts,NDVI and elevation as independent variables,yielded much better results [RAdj2> 0.79; root-mean-square error(RMSE) =0.51℃–1.12℃] associated with estimating Tacompared to those from OLR(RAdj2= 0.40-0.78; RMSE = 1.60℃–4.38℃).In addition,some characteristics of the spatial distribution of monthly Taand the difference between the surface and air temperature(Td) are as follows. According to the analysis of the 0℃ and 10℃ isothermals,Tavalues over the NTP at elevations of 4000–5000 m were greater than 10℃ in the summer(from May to October),and Tavalues at an elevation of3200 m dropped below 0℃ in the winter(from November to April). Taexhibited an increasing trend from northwest to southeast. Except in the southeastern area of the NTP,T d values in other areas were all larger than 0℃ in the winter.

Strengthening the three-dimensional comprehensive observation system of multi-layer interaction on the Tibetan Plateau to cope with the warming and wetting trend

青藏高原的水循环变化对于高原及其下游区域人类的生产生活具有举足轻重的影响.在高原暖湿化的背景下,其水文循环加快,极端天气和自然灾害事件概率增大,比如,雪灾,洪水,滑坡,泥石流,冰崩在山区频发.因此,如何准确的估算青藏高原水循环各分量的大小及变化幅度是评估高原环境变化影响亟需解决的科学问题.根据水在各圈层间转换过程,我们提出了建立第三极地区(尤其是复杂山区)的三维立体多圈层地气相互作用综合观测系统(包括涡动相关系统,行星边界层塔,微波辐射计,风廓线仪和无线电探空系统观测的风温湿廓线及云雨雷达等)的紧迫性和具体方案,进而为研究青藏高原环境变化和山区灾害预测服务.

Measurement of public awareness of climate change in China:based on a national survey with 4,025 samples

Just before the new round of UN climate change conference in Bonn, a survey report, named as the Climate Change in the Chinese Mind 2017, was released in Beijing. The investigation was conducted in the form of a computer-assisted telephone survey with a sample size of 4,025 samples, covering 332 prefecture-level administrative units and four municipalities in China.Urban-rural proportion and sex proportion were specially taken into account, so as to demonstrate the Chinese public awareness objectively. The investigation measures the public awareness from six aspects, which includes climate change beliefs, impacts, response, policies, actions, and the assessment of the effectiveness of climate communication. This article presents the key findings of the survey and provides further insights behind the data.

Comparison of Different Generation Mechanisms of Free Convection between Two Stations on the Tibetan Plateau

Based on high-quality data from eddy covariance measurements at the Qomolangma Monitoring and Research Station for Atmosphere and Environment（QOMS） and the Southeast Tibet Monitoring and Research Station for Environment（SETS）,near-ground free convection conditions（FCCs） and their characteristics are investigated. At QOMS, strong thermal effects accompanied by lower wind speeds can easily trigger the occurrence of FCCs. The change of circulation from prevailing katabatic glacier winds to prevailing upslope winds and the oscillation of upslope winds due to cloud cover are the two main causes of decreases in wind speed at QOMS. The analysis of results from SETS shows that the most important trigger mechanism of FCCs is strong solar heating. Turbulence structural analysis using wavelet transform indicates that lowerfrequency turbulence near the ground emerges from the detected FCCs both at QOMS and at SETS. It should be noted that the heterogeneous underlying surface at SETS creates large-scale turbulence during periods without the occurrence of FCCs. Regarding datasets of all seasons, the distribution of FCCs presents different characteristics during monsoonal and non-monsoonal periods.

Investigations about the Atomic Structure and Mechanical Behavior of Metallic Glasses after Melt Hydrogenation

“Hydrogen in metallic glasses”has become a popular topic for material scientists,yet few studies focus on the atomic⁃scale details.Herein,by utilizing molecular dynamic simulations,the changes on the atomic structure of Cu50Zr50 metallic glasses after melt hydrogenation were systematically analyzed,with the aim of understanding the differences of mechanical behavior between these amorphous alloys.The simulated analyses indicate that the hydrogenated samples become more compact than the H⁃free one,but the fraction of the dominant coordination polyhedra with higher degree of local fivefold symmetry significantly decreases accompanied by the addition of H atoms.Accordingly,melt hydrogenation can induce much more local“soft spots”in metallic glasses to alleviate the degree of strain localization during deformation,i.e.,it has a positive influence on the deformability of glassy alloys in agreement with experimental results.

Acute Guillain Barre Syndrome in Hemodialysis Patients with Diabetic Nephropathy:A Case Report

Acute Guillain Barre syndrome is a common type of autoimmune mediated acute peripheral neuropathy.Its initial symptoms are symmetrical limb weakness,sensory disturbance,pain or other symptoms.This paper reports a case of acute Guillain Barre syndrome in a uremic patient with diabetic nephropathy and long-term regular hemodialysis,in order to further explore the clinical manifestations and differential characteristics of uremic patients with acute Guillain Barre syndrome,improve the early diagnosis rate of uremic patients with acute Guillain Barre syndrome,make the patients get timely treatment,so as to reduce the disability of such patients To improve the prognosis of the disease.

Fracture mechanism and separation conditions of pineapple fruit-stem and calibration of physical characteristic parameters

At present,the research on the physical composition and properties of pineapple plants is scarce,and the uncertainty of fruit picking method is the key bottleneck factor hindering the research and development of pineapple harvesting machinery.Based on the statistics of survey data from many places,this paper analyzes the fruit-stem fracture mechanism and the theoretical conditions for optimal separation through structural modeling,mechanical behavior analysis and function judgment.On this basis,the“pineapple plant fixation bench”and“fruit-stem bending separation torque test equipment”were developed,and large-size,small-size tests and random optimization tests were carried out successively.The test results showed that the larger of the stem-stalk fixation distance,the more torque and fracture starting angle required for fruit fracture would increase,and the change range was small when the stem-stalk fixation distance was within 50 mm,and the probability of brittle fracture and complete separation was very high.When the space between the fracture section and the fruit-stem connecting point is about 5mm,the range of bending moment value required for the fruit-stem fracture is 1.88 to 2.77 N·m,the range of fracture starting angle is 12.2°to 18.1°,and the angular travel range during the separation process is 82.9°to 87.5°.When the stem-stalk fixation distance is about 15 mm,it is the best fruit-stem separation condition and the breaking torque measured in the verification test is about 2.76 N·m.The fracture starting angle is about 13.8°,the maximum prediction error is 13.1%,and the elastic modulus near the fruit-stem joint ranges from 16.1 to 23.9 MPa.This conclusion can provide an important design basis for the research and development of pineapple field picking robot and harvesting equipment.