Catalytic wet air oxidation(CWAO) can degrade some refractory pollutants at a low cost to improve the biodegradability of wastewater. However, in the presence of high temperature and high pressure and strong oxidizing...Catalytic wet air oxidation(CWAO) can degrade some refractory pollutants at a low cost to improve the biodegradability of wastewater. However, in the presence of high temperature and high pressure and strong oxidizing free radicals, the stability of catalysts is often insufficient, which has become a bottleneck in the application of CWAO. In this paper, a copper-based catalyst with excellent hydrothermal stability was designed and prepared. TiO_(2) with excellent stability was used as the carrier to ensure the longterm anchoring of copper and reduce the leaching of the catalyst. The one pot sol–gel method was used to ensure the super dispersion and uniform distribution of copper nanoparticles on the carrier, so as to ensure that more active centers could be retained in a longer period. Experiments show that the catalyst prepared by this method has good stability and catalytic activity, and the catalytic effect is not significantly reduced after 10 cycles of use. The oxidation degradation experiment of m-cresol with the strongest biological toxicity and the most difficult to degrade in coal chemical wastewater was carried out with this catalyst. The results showed that under the conditions of 140℃, 2 MPa and 2 h, m-cresol with a concentration of up to 1000 mg·L^(-1) could be completely degraded, and the COD removal rate could reach 79.15%. The biological toxicity of wastewater was significantly reduced. The development of the catalyst system has greatly improved the feasibility of CWAO in the treatment of refractory wastewater such as coal chemical wastewater.展开更多
In this work,modified g-C_(3)N_(4) was fabricated successfully by calcination of ionic liquid(IL) and urea.The addition of IL changed the polymerization mode of urea,induced the self-assembly of urea molecules,modifie...In this work,modified g-C_(3)N_(4) was fabricated successfully by calcination of ionic liquid(IL) and urea.The addition of IL changed the polymerization mode of urea,induced the self-assembly of urea molecules,modified the morphological structure of the tightly packed g-C_(3)N_(4),and extended the electron conjugation system.When using 1-butyl-3-methylimidazolium chloride([Bmim]Cl) as a modifier,the heteroatom Cl could be inserted into the g-C_(3)N_(4) to optimize the electronic structure.The results of characterizations indicate that the unique structure of modified g-C_(3)N_(4) has an expanded electron delocalization range,introduces an interlayer charge transmission channel,promotes the charge transmission,reduces the band gap,enhances the absorption of visible light,and inhibits electron-hole recombination.Modified g-C_(3)N_(4) showed excellent photocatalytic performance for the degradation of rhodamine B and tetracycline.Furthermore,the effect of different anions in 1-butyl-3-methylimidazolium salts([Bmim]Cl,[Bmim]Br,[Bmim][BF_(4)],and [Bmim][PF_6]) on the structure and function of g-C_(3) N_(4) are discussed.展开更多
基金support provided by the National Natural Science Foundation of China (21978143 and 21878164)。
文摘Catalytic wet air oxidation(CWAO) can degrade some refractory pollutants at a low cost to improve the biodegradability of wastewater. However, in the presence of high temperature and high pressure and strong oxidizing free radicals, the stability of catalysts is often insufficient, which has become a bottleneck in the application of CWAO. In this paper, a copper-based catalyst with excellent hydrothermal stability was designed and prepared. TiO_(2) with excellent stability was used as the carrier to ensure the longterm anchoring of copper and reduce the leaching of the catalyst. The one pot sol–gel method was used to ensure the super dispersion and uniform distribution of copper nanoparticles on the carrier, so as to ensure that more active centers could be retained in a longer period. Experiments show that the catalyst prepared by this method has good stability and catalytic activity, and the catalytic effect is not significantly reduced after 10 cycles of use. The oxidation degradation experiment of m-cresol with the strongest biological toxicity and the most difficult to degrade in coal chemical wastewater was carried out with this catalyst. The results showed that under the conditions of 140℃, 2 MPa and 2 h, m-cresol with a concentration of up to 1000 mg·L^(-1) could be completely degraded, and the COD removal rate could reach 79.15%. The biological toxicity of wastewater was significantly reduced. The development of the catalyst system has greatly improved the feasibility of CWAO in the treatment of refractory wastewater such as coal chemical wastewater.
基金support provided by the National Natural Science Foundation of China (21878164, 21978143)Shandong Provincial Key Research and Development Program (2019GGX102029)+1 种基金“Qing Chuang Science and Technology Plan” Project of Colleges and Universities in Shandong Province (2020KJC005)State Key Laboratory of Materials-Oriented Chemical Engineering-Open Fund (KL19-08)。
文摘In this work,modified g-C_(3)N_(4) was fabricated successfully by calcination of ionic liquid(IL) and urea.The addition of IL changed the polymerization mode of urea,induced the self-assembly of urea molecules,modified the morphological structure of the tightly packed g-C_(3)N_(4),and extended the electron conjugation system.When using 1-butyl-3-methylimidazolium chloride([Bmim]Cl) as a modifier,the heteroatom Cl could be inserted into the g-C_(3)N_(4) to optimize the electronic structure.The results of characterizations indicate that the unique structure of modified g-C_(3)N_(4) has an expanded electron delocalization range,introduces an interlayer charge transmission channel,promotes the charge transmission,reduces the band gap,enhances the absorption of visible light,and inhibits electron-hole recombination.Modified g-C_(3)N_(4) showed excellent photocatalytic performance for the degradation of rhodamine B and tetracycline.Furthermore,the effect of different anions in 1-butyl-3-methylimidazolium salts([Bmim]Cl,[Bmim]Br,[Bmim][BF_(4)],and [Bmim][PF_6]) on the structure and function of g-C_(3) N_(4) are discussed.