A comparative evaluation of DQP, OQP and CEH bleaching of non-wood fibres has revealed that wheat straw, reed, bagasse and bamboo pulps can be bleached to brightness levels of just above 80% ISO, when applying an OQP ...A comparative evaluation of DQP, OQP and CEH bleaching of non-wood fibres has revealed that wheat straw, reed, bagasse and bamboo pulps can be bleached to brightness levels of just above 80% ISO, when applying an OQP bleaching sequence and to brightness levels of about 85% ISO when applying the DQP sequence using 10 - 15 kg/tp of ClO2 (aCl.), 15 - 20 kg/tp of H2O2 together with 1 - 2 kg/tp of EDTA. The P.C. numbers of the DQP and OQP bleached pulps are much lower and the viscosity much higher than those of the CEH bleached pulps. Compared with CEH pulps, both the DQP and OQP pulps had better strength properties, particularly Tear Index. In spite of their higher final brightness levels, the DQP pulps show similar or better strength properties than the OQP pulps. A comparison of the CEH and DQP effluents showed that the DQP bleaching could reduce the pollution load (CODCr, BOD5, SS) by 35 to 60% without the need for recirculation of any effluent streams. The AOX levels could be reduced by 87 to 93%.展开更多
The influential factors of DQP bleaching, chlorine dioxide bleaching, chelation and hydrogen peroxide bleaching, of bamboo kraft pulp were studied. The pH value in D stage, dosage of EDTA in Q stage and charge of MgSO...The influential factors of DQP bleaching, chlorine dioxide bleaching, chelation and hydrogen peroxide bleaching, of bamboo kraft pulp were studied. The pH value in D stage, dosage of EDTA in Q stage and charge of MgSO4 in P stage were optimized. The results indicated that good results of chlorine dioxide bleaching were obtained under the conditions of ClO2 2.0%,pH 4, and the highest final brightness(86.4%ISO) and the lowest final Kappa number(1.37) were attained when the charge of EDTA in Q stage was 0.4%, charge of MgSO4 in P stage was 0.2%, and the other conditions of P stage : pulp consistency 10%, H2O2 charge 2.5%, NaOH charge 1.4%, temperature 90℃ and time 120 min. A comparison of bleaching results, pulp strength and effluent characteristics of bamboo kraft pulp between DQP and CEH sequences was done. The results indicated that bamboo kraft pulp could be bleached to brightness of above 83%ISO by both DQP and CEH sequences. Compared with CEH bleached pulp, DQP bleached pulp had slightly lower brightness, better brightness stability, higher pulp viscosity, better strength properties and lower pollution loads.展开更多
文摘A comparative evaluation of DQP, OQP and CEH bleaching of non-wood fibres has revealed that wheat straw, reed, bagasse and bamboo pulps can be bleached to brightness levels of just above 80% ISO, when applying an OQP bleaching sequence and to brightness levels of about 85% ISO when applying the DQP sequence using 10 - 15 kg/tp of ClO2 (aCl.), 15 - 20 kg/tp of H2O2 together with 1 - 2 kg/tp of EDTA. The P.C. numbers of the DQP and OQP bleached pulps are much lower and the viscosity much higher than those of the CEH bleached pulps. Compared with CEH pulps, both the DQP and OQP pulps had better strength properties, particularly Tear Index. In spite of their higher final brightness levels, the DQP pulps show similar or better strength properties than the OQP pulps. A comparison of the CEH and DQP effluents showed that the DQP bleaching could reduce the pollution load (CODCr, BOD5, SS) by 35 to 60% without the need for recirculation of any effluent streams. The AOX levels could be reduced by 87 to 93%.
文摘The influential factors of DQP bleaching, chlorine dioxide bleaching, chelation and hydrogen peroxide bleaching, of bamboo kraft pulp were studied. The pH value in D stage, dosage of EDTA in Q stage and charge of MgSO4 in P stage were optimized. The results indicated that good results of chlorine dioxide bleaching were obtained under the conditions of ClO2 2.0%,pH 4, and the highest final brightness(86.4%ISO) and the lowest final Kappa number(1.37) were attained when the charge of EDTA in Q stage was 0.4%, charge of MgSO4 in P stage was 0.2%, and the other conditions of P stage : pulp consistency 10%, H2O2 charge 2.5%, NaOH charge 1.4%, temperature 90℃ and time 120 min. A comparison of bleaching results, pulp strength and effluent characteristics of bamboo kraft pulp between DQP and CEH sequences was done. The results indicated that bamboo kraft pulp could be bleached to brightness of above 83%ISO by both DQP and CEH sequences. Compared with CEH bleached pulp, DQP bleached pulp had slightly lower brightness, better brightness stability, higher pulp viscosity, better strength properties and lower pollution loads.
