This research presents an ultra-wideband (UWB) textile antenna designfor body-centric applications. The antenna is printed on a 1 mm thick denim substrate with a 1.7 relative permittivity. The jeans substrate is sand...This research presents an ultra-wideband (UWB) textile antenna designfor body-centric applications. The antenna is printed on a 1 mm thick denim substrate with a 1.7 relative permittivity. The jeans substrate is sandwiched between apartial ground plane and a radiating patch with a Q-shaped slot. The slotted radiating patch is placed above the substrate and measures 27.8 mm × 23.8 mm. In freespace, the antenna covers the ultra-wideband spectrum designated by the FederalCommunication Commission (FCC). Various parameters of the antenna designwere changed for further performance evaluation. Depending on the operating frequency, the antenna's realized gain varied from 2.7 to 5 dB. The antenna achievedhigh radiation efficiency with an omnidirectional radiation pattern. A parametricstudy was performed in research on varying antenna substrates and other components of the antenna. The three outermost layers of the human body are used tomodel a human phantom for on-body simulation. After that, the antenna wasplaced at five different distances from the phantom. The findings demonstrate thatat close distances to the phantom, the antenna's gain and efficiency at lower frequencies are reduced. The antenna's radiation efficiency and gain were muchhigher at higher frequencies for distances greater than 6 mm. Compared to freespace, the antenna's radiation pattern was more omnidirectional, especially athigher frequencies. This antenna is novel, compact and has an ultra wide bandwidth, a maximum of 94.60% radiation efficiency and a 5 dBi gain that will makeit a good candidate for body-centric communications.展开更多
基金support from Taif University Researchers Supporting Project(TURSP-2020/214),Taif University,Taif,Saudi Arabia.
文摘This research presents an ultra-wideband (UWB) textile antenna designfor body-centric applications. The antenna is printed on a 1 mm thick denim substrate with a 1.7 relative permittivity. The jeans substrate is sandwiched between apartial ground plane and a radiating patch with a Q-shaped slot. The slotted radiating patch is placed above the substrate and measures 27.8 mm × 23.8 mm. In freespace, the antenna covers the ultra-wideband spectrum designated by the FederalCommunication Commission (FCC). Various parameters of the antenna designwere changed for further performance evaluation. Depending on the operating frequency, the antenna's realized gain varied from 2.7 to 5 dB. The antenna achievedhigh radiation efficiency with an omnidirectional radiation pattern. A parametricstudy was performed in research on varying antenna substrates and other components of the antenna. The three outermost layers of the human body are used tomodel a human phantom for on-body simulation. After that, the antenna wasplaced at five different distances from the phantom. The findings demonstrate thatat close distances to the phantom, the antenna's gain and efficiency at lower frequencies are reduced. The antenna's radiation efficiency and gain were muchhigher at higher frequencies for distances greater than 6 mm. Compared to freespace, the antenna's radiation pattern was more omnidirectional, especially athigher frequencies. This antenna is novel, compact and has an ultra wide bandwidth, a maximum of 94.60% radiation efficiency and a 5 dBi gain that will makeit a good candidate for body-centric communications.