期刊文献+
共找到8篇文章
< 1 >
每页显示 20 50 100
基于级联PPMgLN晶体的双倍/三倍频双波长激光器 被引量:1
1
作者 孙杰 陈怀熹 +3 位作者 张新彬 冯新凯 李广伟 粱万国 《人工晶体学报》 CAS 北大核心 2021年第7期1386-1390,共5页
本文演示了紧凑的绿色和近红外双色连续波激光光源,其发射波长分别为516 nm和775 nm。设计并制造了级联的周期性极化掺镁铌酸锂晶体,用于同时转换通信波长的二次谐波(SHG)和三次谐波(THG),可以在相同温度下获得绿色和近红外激光的输出... 本文演示了紧凑的绿色和近红外双色连续波激光光源,其发射波长分别为516 nm和775 nm。设计并制造了级联的周期性极化掺镁铌酸锂晶体,用于同时转换通信波长的二次谐波(SHG)和三次谐波(THG),可以在相同温度下获得绿色和近红外激光的输出。通过建立一个单程激光测量系统,在2 W泵浦功率下获得516 nm的0.15 mW绿光和775 nm的1.19 mW的光,晶体温度控制在30.8℃。实验结果将为单激光器泵浦的紧凑型双波长共线激光器提供重要的案例。 展开更多
关键词 周期性极化MgO∶LiNbO3 准相位匹配 二次谐波产生 三次谐波产生
下载PDF
一种通过梯形PPMgLN波导倍频实现带宽可调谐光源的理论研究
2
作者 陈家颖 张新彬 +4 位作者 陈怀熹 冯新凯 程星 马磊 梁万国 《人工晶体学报》 CAS 北大核心 2022年第11期1830-1835,共6页
本文设计了一种梯形的周期极化掺镁铌酸锂(PPMgLN)波导,并通过在传播方向上引入温度梯度来拓宽其倍频(SHG)过程的泵浦光源可接收带宽。通过有限差分的光束传输法,计算波导的有效折射率,并进行波导尺寸的设计。结果表明,通过改变梯形波... 本文设计了一种梯形的周期极化掺镁铌酸锂(PPMgLN)波导,并通过在传播方向上引入温度梯度来拓宽其倍频(SHG)过程的泵浦光源可接收带宽。通过有限差分的光束传输法,计算波导的有效折射率,并进行波导尺寸的设计。结果表明,通过改变梯形波导不同位置的温度,使其形成一个温度梯度,可拓宽泵浦光源的波长可接收带宽。本文所设计的PPMgLN波导最大泵浦光源可接收带宽为C波段,即1 530~1 565 nm,该波导可倍频C波段,得到输出波段带宽为765~782.5 nm,温度调谐范围为30~150℃。 展开更多
关键词 周期极化铌酸锂 波导 准相位匹配 倍频 温度梯度 带宽扩展 C波段
下载PDF
高性能Zn扩散掺镁LN晶体脊形波导器件的研究 被引量:2
3
作者 陈中舆 程静欣 +3 位作者 陈怀熹 冯新凯 张新彬 梁万国 《人工晶体学报》 CAS 北大核心 2022年第11期1823-1829,共7页
将铌酸锂(LiNbO_(3),LN)晶体制作成波导型结构能够进一步提高器件的集成度,已经广泛应用于电光调制器、频率变换、声光调Q等光电器件中,在光纤通信、光电传感、激光雷达、航天航空等领域具有重要的应用前景。传统的Ti扩散法制作的LN波... 将铌酸锂(LiNbO_(3),LN)晶体制作成波导型结构能够进一步提高器件的集成度,已经广泛应用于电光调制器、频率变换、声光调Q等光电器件中,在光纤通信、光电传感、激光雷达、航天航空等领域具有重要的应用前景。传统的Ti扩散法制作的LN波导在短波应用中抗光折变损伤能力差,退火质子交换法制作的LN波导只能支持TM模(横磁模)单偏振传输,应用领域受限。本文提出了一种新型Zn扩散法制作掺镁LN脊形波导的方法,通过建立波导的扩散模型和仿真,探索制备的工艺条件并进行测试,得到的LN波导最低传输损耗为0.86 dB/cm,光折变损伤阈值可达到184 kW/cm^(2),这将为高功率铌酸锂波导集成光电器件的研发提供一种较好的制备途径。 展开更多
关键词 掺镁铌酸锂晶体 光波导 波导器件 ZN扩散 高功率密度 传输损耗
下载PDF
Fabrication and characterization of high-damage resistance Zn-diffused MgO:PPLN ridge waveguides
4
作者 chenG Xing FENG Xinkai +3 位作者 MA Lei chen Jiaying chen huaixi LIANG Wanguo 《Optoelectronics Letters》 EI 2024年第1期12-17,共6页
This study investigates the fabrication process of Zn-diffused ridge waveguides in periodically poled magnesium-doped lithium niobate(PPMgO:LN).A controlled variable method is used to study the effects of diffusion te... This study investigates the fabrication process of Zn-diffused ridge waveguides in periodically poled magnesium-doped lithium niobate(PPMgO:LN).A controlled variable method is used to study the effects of diffusion temperature,diffusion time,ZnO film thickness,and barrier layer thickness on the surface domain depolarization and waveguide quality of PPMgO:LN.A special barrier layer is proposed that can automatically lift off from the sample surface,which increases the depth of Zn doping and reduces the surface loss of the waveguide.By optimizing the process parameters,we fabricate Zn-diffused PPMgO:LN ridge waveguides with a length of 22.80 mm and a period of 18.0μm.The above waveguides can make a second harmonic generation(SHG)at 775 nm with an output power of 90.20 mW by a pump power of 741 mW at 1550 nm.The corresponding conversion efficiency is 3.160%/W·cm2,and the waveguide loss is approximately 0.81 dB/cm.These results demonstrate that high-efficiency devices can be obtained through the fabrication process described in this paper. 展开更多
关键词 WAVEGUIDE WAVEGUIDES PUMP
原文传递
Simulation design of thin film lithium niobate electro-optic modulator with bimetallic layer electrodes
5
作者 WU Qiulin FENG Xinkai +3 位作者 chen Jiaying MA Lei chen huaixi LIANG Wanguo 《Optoelectronics Letters》 EI 2024年第6期339-345,共7页
Thin-film lithium niobate electro-optical modulator will become the key device in the future optical communication,which has the advantages of high modulation rate,low half-wave voltage,large bandwidth,and easy integr... Thin-film lithium niobate electro-optical modulator will become the key device in the future optical communication,which has the advantages of high modulation rate,low half-wave voltage,large bandwidth,and easy integration compared with conventional bulk lithium niobate modulator.However,because the electrode gap of the lithium niobate film modulator is very narrow,when the microwave frequency gets higher,it leads to higher microwave loss,and the electro-optical performance of the modulator will be greatly reduced.Here,we propose a thin film lithium niobate electro-optic modulator with a bimetallic layer electrode structure to achieve microwave loss less than 8 dB/cm in the range of 200 GHz,exhibiting a voltage-length product of 1.1 V·cm and a 3 dB electro-optic bandwidth greater than 160 GHz.High-speed data transmission test has been performed,showing good performance. 展开更多
关键词 Simulation design of thin film lithium niobate electro-optic modulator with bimetallic layer electrodes
原文传递
光纤耦合周期极化铌酸锂薄膜波导器件的研究
6
作者 冯新凯 陈怀熹 +1 位作者 陈家颖 梁万国 《中国激光》 EI CAS CSCD 北大核心 2023年第22期118-123,共6页
对硅基周期极化铌酸锂(PPLN)薄膜脊形波导进行了理论分析,并使用有限元软件模拟了25℃下泵浦波长为1560 nm的PPLN脊形波导的准相位匹配(QPM)周期与波导脊高和脊宽的关系。仿真结果表明,在相同脊宽(10μm)或脊高(10μm)下,PPLN脊形波导的... 对硅基周期极化铌酸锂(PPLN)薄膜脊形波导进行了理论分析,并使用有限元软件模拟了25℃下泵浦波长为1560 nm的PPLN脊形波导的准相位匹配(QPM)周期与波导脊高和脊宽的关系。仿真结果表明,在相同脊宽(10μm)或脊高(10μm)下,PPLN脊形波导的QPM周期随着脊高或脊宽的增加而增大,最后趋于常数(即块状PPLN的QPM周期)。进一步模拟了在脊高和脊宽维持不变的情况下,PPLN脊形波导的QPM周期与温度之间的关系。结果表明,随着温度的增加,PPLN脊形波导的QPM周期逐渐减小,并且温度每升高1℃,QPM周期减小约3 nm。根据仿真结果制作了硅基片上集成PPLN脊形波导器件,将其封装成小体积的光纤入光纤出的波导,并测试了性能。当温度为24.8℃、1560 nm基频光输入功率为1.2 W时,最大输出653 m W的倍频光,光光转换效率达54.4%,归一化转换效率为20.2%·W^(-1)·cm^(-2)。 展开更多
关键词 非线性光学 周期极化铌酸锂 薄膜 准相位匹配 脊形波导
原文传递
Compact yellow-orange Nd:YVO_(4)/PPMgLN laser at 589 nm
7
作者 MA Lei FENG Xinkai +3 位作者 chen huaixi chenG Xing chen Jiaying LIANG Wanguo 《Optoelectronics Letters》 EI 2023年第11期641-645,共5页
We propose and make a compact yellow-orange laser of the Nd-doped yttrium vanadate(Nd:YVO_(4))/periodically poled Mg-doped lithium niobate(PPMgLN)module by Raman frequency-doubling at 589 nm.By reasonably designing th... We propose and make a compact yellow-orange laser of the Nd-doped yttrium vanadate(Nd:YVO_(4))/periodically poled Mg-doped lithium niobate(PPMgLN)module by Raman frequency-doubling at 589 nm.By reasonably designing the size of the Nd:YVO_(4)and 5 mol%PPMgLN crystals,cavity length and coating parameter,a compact 589 nm laser module with a total size of 3 mm×10 mm×1.5 mm is fabricated.In the laser module,the input surface of Nd:YVO_(4)crystal is end-pumped by an 808 nm laser diode(LD).Under the effect of linear resonant cavity structure,the output surface of PPMgLN crystal with a period of 9.48μm generates 589 nm yellow-orange light.The experimental results show that the maximum output power at 589 nm is 390 mW at the pump power of 3 W with the optical-optical conversion efficiency of 13%and the stability of the output power is less than 2%within 3 h. 展开更多
关键词 Nd: PPMGLN LASER
原文传递
基于MgO:PPLN啁啾结构和频的宽谱黄-橙激光输出 被引量:3
8
作者 郭磊 陈怀熹 +5 位作者 张新彬 郭玮 D.K.Choge 李广伟 冯新凯 梁万国 《激光与光电子学进展》 CSCD 北大核心 2020年第9期162-167,共6页
宽谱黄-橙激光是生物医学领域中重要的荧光光源。基于周期极化掺氧化镁铌酸锂晶体(MgO:PPLN)的宽带准相位匹配技术,提出了一种基于变迹步进啁啾MgO:PPLN的建模方案。在啁啾MgO:PPLN中实现了C波段(1525~1565nm)和波长为980nm激光的宽带和... 宽谱黄-橙激光是生物医学领域中重要的荧光光源。基于周期极化掺氧化镁铌酸锂晶体(MgO:PPLN)的宽带准相位匹配技术,提出了一种基于变迹步进啁啾MgO:PPLN的建模方案。在啁啾MgO:PPLN中实现了C波段(1525~1565nm)和波长为980nm激光的宽带和频,通过遗传算法对变迹率和啁啾周期范围增量进行了数值优化,在波长为600nm附近获得了转换效率约为-11dB、带顶波动为0.047dB、带宽为6nm的光谱输出,提供了一种高转换效率、小带顶波动的宽谱黄-橙全固态激光输出方案。 展开更多
关键词 非线性光学频率 宽带和频 周期极化晶体 黄-橙全固态激光
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部