The properties of salinity in the South China Sea(SCS),a significant marginal sea connecting the Pacific and Indian Oceans,are greatly influenced by the transport of fresh water flux between the two oceans.However,the...The properties of salinity in the South China Sea(SCS),a significant marginal sea connecting the Pacific and Indian Oceans,are greatly influenced by the transport of fresh water flux between the two oceans.However,the long-term changes in the intermediate water in the SCS have not been thoroughly studied due to limited data,particularly in relation to its thermodynamic variations.This study utilized reanalysis data products to identify a 60-year trend of freshening in the intermediate waters of the northern South China Sea(NSCS),accompanied by an expansion of low-salinity water.The study also constructed salinity budget terms,including advection and entrainment processes,and conducted an analysis of the salinity budget to understand the impacts of external and internal dynamic processes on the freshening trend of the intermediate water in the NSCS.The analysis revealed that the freshening in the northwest Pacific Ocean and the intensification of intrusion through the Luzon Strait at intermediate levels are the primary drivers of the salinity changes in the NSCS.Additionally,a weakened trend in the intensity of vertical entrainment also contributes to the freshening in the NSCS.This study offers new insights into the understanding of regional deep sea changes in response to variations in both thermodynamics and oceanic dynamic processes.展开更多
Ocean heat content(OHC)change contributes substantially to global sea level rise,so it is a vital task for the climate research community to estimate historical OHC.While there are large uncertainties regarding its va...Ocean heat content(OHC)change contributes substantially to global sea level rise,so it is a vital task for the climate research community to estimate historical OHC.While there are large uncertainties regarding its value,in this study,the authors discuss recent progress to reduce the errors in OHC estimates,including corrections to the systematic biases in expendable bathythermograph(XBT)data,filling gaps in the data,and choosing a proper climatology.These improvements lead to a better reconstruction of historical upper(0–700 m)OHC change,which is presented in this study as the Institute of Atmospheric Physics(IAP)version of historical upper OHC assessment.Challenges still remain;for example,there is still no general consensus on mapping methods.Furthermore,we show that Coupled Model Intercomparison Project,Phase 5(CMIP5)simulations have limited ability in capturing the interannual and decadal variability of historical upper OHC changes during the past 45 years.展开更多
Combining sintering additive with field assisted sintering,stereolithographical dense Si3N4 ceramics was successfully fabricated.Owing to a large amount of polymer during the stereolithography,the green parts have the...Combining sintering additive with field assisted sintering,stereolithographical dense Si3N4 ceramics was successfully fabricated.Owing to a large amount of polymer during the stereolithography,the green parts have the characteristics of low powder loading and high porosity.Adjusting the process parameters such as sintering temperature and soaking time can effectively improve the density of the specimens.The stress exponent n of all specimens is in a range of 1 and 2,which is derived from a modified sintering kinetics model.The apparent activation energy Qd of stereolithographic Si_(3)N_(4) ceramics sintered with applied pressures of 30 MPa,40 MPa,and 50 MPa is 384.75,276.61 and 193.95 kJ/mol,respectively,suggesting that the densification dynamic process is strengthened by raising applied pressure.The grain boundary slipping plays a dominating role in the densification of stereolithographic Si3N4 ceramics.The Vickers hardness and fracture toughness of stereolithographic Si3N4 ceramics are HV10/10(1347.9±2.4)and(6.57±0.07)MPaAbstract:Combining sintering additive with field assisted sintering,stereolithographical dense Si3N4 ceramics was successfully fabricated.Owing to a large amount of polymer during the stereolithography,the green parts have the characteristics of low powder loading and high porosity.Adjusting the process parameters such as sintering temperature and soaking time can effectively improve the density of the specimens.The stress exponent n of all specimens is in a range of 1 and 2,which is derived from a modified sintering kinetics model.The apparent activation energy Qd of stereolithographic Si3N4 ceramics sintered with applied pressures of 30 MPa,40 MPa,and 50 MPa is 384.75,276.61 and 193.95 kJ/mol,respectively,suggesting that the densification dynamic process is strengthened by raising applied pressure.The grain boundary slipping plays a dominating role in the densification of stereolithographic Si3N4 ceramics.The Vickers hardness and fracture toughness of stereolithographic Si3N4 ceramics are HV10/10(1347.9±2.4)and(6.57±0.07)MPa·m^(1/2),respectively.展开更多
基金National Natural Science Foundation of China(92158204,42076019)Innovation Group Project of the Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)(31020004)Open Project of the State Key Laboratory of Tropical Oceanography(LTOZZ2001)。
文摘The properties of salinity in the South China Sea(SCS),a significant marginal sea connecting the Pacific and Indian Oceans,are greatly influenced by the transport of fresh water flux between the two oceans.However,the long-term changes in the intermediate water in the SCS have not been thoroughly studied due to limited data,particularly in relation to its thermodynamic variations.This study utilized reanalysis data products to identify a 60-year trend of freshening in the intermediate waters of the northern South China Sea(NSCS),accompanied by an expansion of low-salinity water.The study also constructed salinity budget terms,including advection and entrainment processes,and conducted an analysis of the salinity budget to understand the impacts of external and internal dynamic processes on the freshening trend of the intermediate water in the NSCS.The analysis revealed that the freshening in the northwest Pacific Ocean and the intensification of intrusion through the Luzon Strait at intermediate levels are the primary drivers of the salinity changes in the NSCS.Additionally,a weakened trend in the intensity of vertical entrainment also contributes to the freshening in the NSCS.This study offers new insights into the understanding of regional deep sea changes in response to variations in both thermodynamics and oceanic dynamic processes.
基金supported by the Chinese Academy of Sciences project entitled"Western Pacific Ocean System:Structure,Dynamics and Consequences"(Grant No.XDA11010405)the National Natural Science Foundation of China(Grant No.41476016)
文摘Ocean heat content(OHC)change contributes substantially to global sea level rise,so it is a vital task for the climate research community to estimate historical OHC.While there are large uncertainties regarding its value,in this study,the authors discuss recent progress to reduce the errors in OHC estimates,including corrections to the systematic biases in expendable bathythermograph(XBT)data,filling gaps in the data,and choosing a proper climatology.These improvements lead to a better reconstruction of historical upper(0–700 m)OHC change,which is presented in this study as the Institute of Atmospheric Physics(IAP)version of historical upper OHC assessment.Challenges still remain;for example,there is still no general consensus on mapping methods.Furthermore,we show that Coupled Model Intercomparison Project,Phase 5(CMIP5)simulations have limited ability in capturing the interannual and decadal variability of historical upper OHC changes during the past 45 years.
基金Project(20170410221235842)supported by Shenzhen Technical Innovation and Tackling Program,ChinaProject(2019zzts859)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(20203BBE53053)supported by Key R&D Project of Jiangxi Provincial Department of Science and Technology,China。
文摘Combining sintering additive with field assisted sintering,stereolithographical dense Si3N4 ceramics was successfully fabricated.Owing to a large amount of polymer during the stereolithography,the green parts have the characteristics of low powder loading and high porosity.Adjusting the process parameters such as sintering temperature and soaking time can effectively improve the density of the specimens.The stress exponent n of all specimens is in a range of 1 and 2,which is derived from a modified sintering kinetics model.The apparent activation energy Qd of stereolithographic Si_(3)N_(4) ceramics sintered with applied pressures of 30 MPa,40 MPa,and 50 MPa is 384.75,276.61 and 193.95 kJ/mol,respectively,suggesting that the densification dynamic process is strengthened by raising applied pressure.The grain boundary slipping plays a dominating role in the densification of stereolithographic Si3N4 ceramics.The Vickers hardness and fracture toughness of stereolithographic Si3N4 ceramics are HV10/10(1347.9±2.4)and(6.57±0.07)MPaAbstract:Combining sintering additive with field assisted sintering,stereolithographical dense Si3N4 ceramics was successfully fabricated.Owing to a large amount of polymer during the stereolithography,the green parts have the characteristics of low powder loading and high porosity.Adjusting the process parameters such as sintering temperature and soaking time can effectively improve the density of the specimens.The stress exponent n of all specimens is in a range of 1 and 2,which is derived from a modified sintering kinetics model.The apparent activation energy Qd of stereolithographic Si3N4 ceramics sintered with applied pressures of 30 MPa,40 MPa,and 50 MPa is 384.75,276.61 and 193.95 kJ/mol,respectively,suggesting that the densification dynamic process is strengthened by raising applied pressure.The grain boundary slipping plays a dominating role in the densification of stereolithographic Si3N4 ceramics.The Vickers hardness and fracture toughness of stereolithographic Si3N4 ceramics are HV10/10(1347.9±2.4)and(6.57±0.07)MPa·m^(1/2),respectively.