The field experiments were carried out to investigate the dynamics and models of N, P and K absorption for the cotton plants with a lint of 3 000 kg ha-1 in Xinjiang. The main results were as follows: The contents of ...The field experiments were carried out to investigate the dynamics and models of N, P and K absorption for the cotton plants with a lint of 3 000 kg ha-1 in Xinjiang. The main results were as follows: The contents of N, P2O5, K2O in cotton leaves, stems, squares and bolls decreased obviously with the time over the whole growth duration and the falling extent was greater in high-yield cotton than in CK. Contents of N in leaves, squares and bolls, in particular in the leaves of fruit-bearing shoot was higher in high-yield cotton than in CK. Contents of P2O5 in squares and bolls and that of K2O in stems were higher in high-yield cotton than in CK during the whole growing period. The accumulations of N, P2O5 and K2O in the cotton plants could be described with a logistic curve equation. There was the fastest nutrient uptake at about 90 d for N, 92 d for P2O5 and 85 d for K2O after emergence, respectively. Total nutrient accumulation of N, P2O5 and K2O was 385.8, 244. 7 and 340.3 kg ha-1, respectively. Approximately 12. 5 kg N, 8. 0 kg P2O5 and 11.1 kg K2O were needed for producing 100 kg lint with the leaves and stems under the super high yield condition of 3 000 kg ha-1 in Xinjiang.展开更多
Diversity of bacteria was studied in deep-sea sediments from the Shikoku Basin in the Northwest Pacific Ocean by PCR, RFLP and sequence analysis of 16S rDNA and comparing with Genbank database. Based on the RFLP profi...Diversity of bacteria was studied in deep-sea sediments from the Shikoku Basin in the Northwest Pacific Ocean by PCR, RFLP and sequence analysis of 16S rDNA and comparing with Genbank database. Based on the RFLP profile generated, 77 clones from the 16S rDNA library were divided into 27 types. Phylogenetic analysis showed that the 27 independent clones fell into four groups: Proteobac-teria (62.96%), Chloroflexi (14.81%), Planctomycetes (14.81%) and Acidobacteria (7.41%). Among all sequenced clones, 6 were related to the sulfur or sulfate metabolism bacteria and the results also demonstrated that some bacteria in deep-sea sediments had relation to matter-energy circulation.展开更多
Sr2SiO4∶Eu 3+ ,Bi 3+ and SrSiO 3∶Eu 3+ ,Bi 3+ samples were synthesized at high temperature and high pressure. The effect of high pressure on the structure and luminescence properties of the samples were ...Sr2SiO4∶Eu 3+ ,Bi 3+ and SrSiO 3∶Eu 3+ ,Bi 3+ samples were synthesized at high temperature and high pressure. The effect of high pressure on the structure and luminescence properties of the samples were studied. As a comparison, the samples were also prepared by the method of sol-gel at high temperature and atmospheric pressure. The SrSiO 3∶Eu 3+ ,Bi 3+ prepared at atmosphere has a hexagonal phase structure; in the pressure range of 2 34-4 10 GPa, it is transformed into a pseudo-orthorhombic structure(monoclinic), and in the pressure range of 4 10-4 15 GPa, the structure change of Sr 2SiO 4∶Eu 3+ , Bi 3+ has not been observed, it maintains the monoclinic structure of the samples synthesized at an atmospheric pressure. High pressure makes the luminescence properties of the samples changed obviously. The intensity and the relative quantum luminescent efficiency decrease, the half-width increases obviously and the red shift occurs. The changes of the luminescence properties result from the pressure-induced changes of the crystal structures.展开更多
The integrity assessment of defective pipelines represents a practically important task of structural analysis and design in various technological areas,such as oil and gas indus- try,power plant engineering and chemi...The integrity assessment of defective pipelines represents a practically important task of structural analysis and design in various technological areas,such as oil and gas indus- try,power plant engineering and chemical factories.An iterative algorithm is presented for the kinematic limit analysis of 3-D rigid-perfectly plastic bodies.A numerical path scheme for radial loading is adopted to deal with complex multi-loading systems.The numerical procedure has been applied to carry out the plastic collapse analysis of pipelines with part-through slot under internal pressure,bending moment and axial force.The effects of various shapes and sizes of part-through slots on the collapse loads of pipelines are systematically investigated and evaluated.Some typical failure modes corresponding to different configurations of slots and loading forms are studied.展开更多
The effects of the incorporated oxygen and the different buffer layers on the optical properties and surface morphology of GaN were studied. The results show that the decrease of the concentration of the incorporated ...The effects of the incorporated oxygen and the different buffer layers on the optical properties and surface morphology of GaN were studied. The results show that the decrease of the concentration of the incorporated oxygen has no effect on the surface morphology, but improves the optical properties. While the introduction of the AlN buffer layer makes not only the surface morphology but also the optical properties improve. Both the oxygen contamination from the nitrogen source and the resulted morphology are directly related to the line width of the low-temperature photoluminescence(PL) spectra.展开更多
The distributions of temperature and residual stresses in thin plates of BT20titanium alloy are numerically analyzed by three-dimensional finite element software duringelectron beam welding and electron beam local pos...The distributions of temperature and residual stresses in thin plates of BT20titanium alloy are numerically analyzed by three-dimensional finite element software duringelectron beam welding and electron beam local post-weld heat treatment (EBLPWHT). Combined withnumerical calculating results, the effects of different EBLPWHT mode and parameters, including heattreating position, heating width and heating time, on the distribution of welding residual stressesare analyzed. The results show that, the residual tensile stresses in weld center can be largelydecreased when the weld is heat treated at back preface of the plate. The numerical results alsoindicated that the magnitude of the residual longitudinal stresses of the weld and the zone vicinityof the weld is decreased, and the range of the residual longitudinal stresses is increased alongwith the increase of heating width and heating time.展开更多
A series of GaN layers was grown on sapphire (0001) substrates under various growth conditions by means of the molecular beam epitaxy(MBE) method, the optical characteristics and surface morphologies of the samples we...A series of GaN layers was grown on sapphire (0001) substrates under various growth conditions by means of the molecular beam epitaxy(MBE) method, the optical characteristics and surface morphologies of the samples were studied. The results show that the line width of the GaN emission gradually decreases and the peak shifts under the Ga-rich condition by increasing the Ga-flux on keeping all other growth conditions unchanged. It has been also found that the resulted morphology is directly related to the Ga-flux.展开更多
A Raman study was carried out for LiMn 2O 4, which was synthesized via the mixture of Mn 3O 4 and LiNO 3 sintered at different temperatures. It is shown that there are two kinds of Raman spectra for LiMn 2O ...A Raman study was carried out for LiMn 2O 4, which was synthesized via the mixture of Mn 3O 4 and LiNO 3 sintered at different temperatures. It is shown that there are two kinds of Raman spectra for LiMn 2O 4 at different sintering temperatures, while the X-ray diffraction patterns of LiMn 2O 4 sintered at different temperatures are the same. Five Raman bands observed for the materials sintered below 500 ℃ are consistent with the theoretical prediction for spinel structure based on the group theory. Only two Raman bands were observed for the materials sintered at temperatures higher than 500 ℃. The best preparation condition for obtaining a good spinel LiMn 2O 4 is suggested based on the Raman study.展开更多
In this paper,the authors construct a class of fractal surfaces,Bush type surfaces,based on the Bush type functions.The Box dimension,Packing dimension and Hausdorff dimension of such surfaces are investigated.
A three-dimensional numerical model was developed to simulate reaerationusing a body-fitted coordinate system. The model was designed to calculate the velocity and oxygenconcentration separately, called, 'no pairi...A three-dimensional numerical model was developed to simulate reaerationusing a body-fitted coordinate system. The model was designed to calculate the velocity and oxygenconcentration separately, called, 'no pairing resolution'. The velocity was calculated by SIMPLECalgorithm in the body-fitted coordinate system. The considerably proposed model was checked by areaeration experiment couducted in an open channel. The computed results agree considerably wellwith the experimental data. The model was also used to predict the reaeration in an S-shapedchannel, and the numerical results are discussed.展开更多
基金supported by the National Key Technologies R&D Program in 10th Five-year Plan of China(2001BA507A)the National Natural Sicence Foundation of China(39760040).
文摘The field experiments were carried out to investigate the dynamics and models of N, P and K absorption for the cotton plants with a lint of 3 000 kg ha-1 in Xinjiang. The main results were as follows: The contents of N, P2O5, K2O in cotton leaves, stems, squares and bolls decreased obviously with the time over the whole growth duration and the falling extent was greater in high-yield cotton than in CK. Contents of N in leaves, squares and bolls, in particular in the leaves of fruit-bearing shoot was higher in high-yield cotton than in CK. Contents of P2O5 in squares and bolls and that of K2O in stems were higher in high-yield cotton than in CK during the whole growing period. The accumulations of N, P2O5 and K2O in the cotton plants could be described with a logistic curve equation. There was the fastest nutrient uptake at about 90 d for N, 92 d for P2O5 and 85 d for K2O after emergence, respectively. Total nutrient accumulation of N, P2O5 and K2O was 385.8, 244. 7 and 340.3 kg ha-1, respectively. Approximately 12. 5 kg N, 8. 0 kg P2O5 and 11.1 kg K2O were needed for producing 100 kg lint with the leaves and stems under the super high yield condition of 3 000 kg ha-1 in Xinjiang.
文摘Diversity of bacteria was studied in deep-sea sediments from the Shikoku Basin in the Northwest Pacific Ocean by PCR, RFLP and sequence analysis of 16S rDNA and comparing with Genbank database. Based on the RFLP profile generated, 77 clones from the 16S rDNA library were divided into 27 types. Phylogenetic analysis showed that the 27 independent clones fell into four groups: Proteobac-teria (62.96%), Chloroflexi (14.81%), Planctomycetes (14.81%) and Acidobacteria (7.41%). Among all sequenced clones, 6 were related to the sulfur or sulfate metabolism bacteria and the results also demonstrated that some bacteria in deep-sea sediments had relation to matter-energy circulation.
基金Supported by the Science and Technology Bureau of Jilin Province( No. 2 0 0 2 0 6 15 ) and the Overseas- back Scholar Pro-gram of Ministry of Personnel of China
文摘Sr2SiO4∶Eu 3+ ,Bi 3+ and SrSiO 3∶Eu 3+ ,Bi 3+ samples were synthesized at high temperature and high pressure. The effect of high pressure on the structure and luminescence properties of the samples were studied. As a comparison, the samples were also prepared by the method of sol-gel at high temperature and atmospheric pressure. The SrSiO 3∶Eu 3+ ,Bi 3+ prepared at atmosphere has a hexagonal phase structure; in the pressure range of 2 34-4 10 GPa, it is transformed into a pseudo-orthorhombic structure(monoclinic), and in the pressure range of 4 10-4 15 GPa, the structure change of Sr 2SiO 4∶Eu 3+ , Bi 3+ has not been observed, it maintains the monoclinic structure of the samples synthesized at an atmospheric pressure. High pressure makes the luminescence properties of the samples changed obviously. The intensity and the relative quantum luminescent efficiency decrease, the half-width increases obviously and the red shift occurs. The changes of the luminescence properties result from the pressure-induced changes of the crystal structures.
基金Project supported by the Ministry of Science and Technology of China (No.2001BA803B03-05).
文摘The integrity assessment of defective pipelines represents a practically important task of structural analysis and design in various technological areas,such as oil and gas indus- try,power plant engineering and chemical factories.An iterative algorithm is presented for the kinematic limit analysis of 3-D rigid-perfectly plastic bodies.A numerical path scheme for radial loading is adopted to deal with complex multi-loading systems.The numerical procedure has been applied to carry out the plastic collapse analysis of pipelines with part-through slot under internal pressure,bending moment and axial force.The effects of various shapes and sizes of part-through slots on the collapse loads of pipelines are systematically investigated and evaluated.Some typical failure modes corresponding to different configurations of slots and loading forms are studied.
文摘The effects of the incorporated oxygen and the different buffer layers on the optical properties and surface morphology of GaN were studied. The results show that the decrease of the concentration of the incorporated oxygen has no effect on the surface morphology, but improves the optical properties. While the introduction of the AlN buffer layer makes not only the surface morphology but also the optical properties improve. Both the oxygen contamination from the nitrogen source and the resulted morphology are directly related to the line width of the low-temperature photoluminescence(PL) spectra.
基金This project is supported by Foundation of National Defense Technology Key Laboratory, China (No.99JS50.3.2JW1402).
文摘The distributions of temperature and residual stresses in thin plates of BT20titanium alloy are numerically analyzed by three-dimensional finite element software duringelectron beam welding and electron beam local post-weld heat treatment (EBLPWHT). Combined withnumerical calculating results, the effects of different EBLPWHT mode and parameters, including heattreating position, heating width and heating time, on the distribution of welding residual stressesare analyzed. The results show that, the residual tensile stresses in weld center can be largelydecreased when the weld is heat treated at back preface of the plate. The numerical results alsoindicated that the magnitude of the residual longitudinal stresses of the weld and the zone vicinityof the weld is decreased, and the range of the residual longitudinal stresses is increased alongwith the increase of heating width and heating time.
基金the Science and Technology Bureau of Jilin Province(No.2 0 0 2 0 6 15 ) and The Overseas- back ScholarProgram of Ministry of Personnel of China
文摘A series of GaN layers was grown on sapphire (0001) substrates under various growth conditions by means of the molecular beam epitaxy(MBE) method, the optical characteristics and surface morphologies of the samples were studied. The results show that the line width of the GaN emission gradually decreases and the peak shifts under the Ga-rich condition by increasing the Ga-flux on keeping all other growth conditions unchanged. It has been also found that the resulted morphology is directly related to the Ga-flux.
基金SupportedbytheNational NaturalScienceFoundation of China( No.5 0 2 72 0 2 3),the Special Funds for Major State Ba-sic researchProject of China under( No.2 0 0 2 CB2 1180 2) and the Research Grant for Ph.D Programs from Ministry ofEduca-tion( No.2 0 0 10
文摘A Raman study was carried out for LiMn 2O 4, which was synthesized via the mixture of Mn 3O 4 and LiNO 3 sintered at different temperatures. It is shown that there are two kinds of Raman spectra for LiMn 2O 4 at different sintering temperatures, while the X-ray diffraction patterns of LiMn 2O 4 sintered at different temperatures are the same. Five Raman bands observed for the materials sintered below 500 ℃ are consistent with the theoretical prediction for spinel structure based on the group theory. Only two Raman bands were observed for the materials sintered at temperatures higher than 500 ℃. The best preparation condition for obtaining a good spinel LiMn 2O 4 is suggested based on the Raman study.
文摘In this paper,the authors construct a class of fractal surfaces,Bush type surfaces,based on the Bush type functions.The Box dimension,Packing dimension and Hausdorff dimension of such surfaces are investigated.
文摘A three-dimensional numerical model was developed to simulate reaerationusing a body-fitted coordinate system. The model was designed to calculate the velocity and oxygenconcentration separately, called, 'no pairing resolution'. The velocity was calculated by SIMPLECalgorithm in the body-fitted coordinate system. The considerably proposed model was checked by areaeration experiment couducted in an open channel. The computed results agree considerably wellwith the experimental data. The model was also used to predict the reaeration in an S-shapedchannel, and the numerical results are discussed.
