期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
融合自注意力机制和多路金字塔卷积的软件需求聚类算法 被引量:8
1
作者 康雁 崔国荣 +3 位作者 李浩 杨其越 李晋源 王沛尧 《计算机科学》 CSCD 北大核心 2020年第3期48-53,共6页
随着软件数量的急剧增长以及种类的日益多样化,挖掘软件需求文本特征并对软件需求特征聚类,成为了软件工程领域的一大挑战。软件需求文本的聚类为软件开发过程提供了可靠的保障,同时降低了需求分析阶段的潜在风险和负面影响。然而,软件... 随着软件数量的急剧增长以及种类的日益多样化,挖掘软件需求文本特征并对软件需求特征聚类,成为了软件工程领域的一大挑战。软件需求文本的聚类为软件开发过程提供了可靠的保障,同时降低了需求分析阶段的潜在风险和负面影响。然而,软件需求文本存在离散度高、噪声大和数据稀疏等特点,目前有关聚类的工作局限于单一类型的文本,鲜有考虑软件需求的功能语义。文中鉴于需求文本的特点和传统型聚类方法的局限性,提出了融合自注意力机制和多路金字塔卷积的软件需求聚类算法(SA-MPCN&SOM)。该方法通过自注意力机制捕获全局特征,然后基于多路金字塔卷积从不同窗口的通路深度挖掘需求文本特征,使得感知的文本片段逐倍增加,最终融合多路文本特征,利用SOM完成聚类。在软件需求数据上的实验表明,所提方法能较好地挖掘需求特征并对其聚类,性能上优于其他特征提取方式和聚类算法。 展开更多
关键词 需求分析 文本聚类 自注意力机制 金字塔卷积 文本特征
下载PDF
Quantitative analysis on microstructure and high temperature fracture mechanism of 2.6vol%TiBw/Ti6Al4V composites with equiaxed microstructure after heat treatment
2
作者 PAN Jin-qi ZHANG Wen-cong +2 位作者 YANG Jian-lei CHEN Wen-zhen cui guo-rong 《Journal of Central South University》 SCIE EI CAS CSCD 2021年第8期2307-2319,共13页
In this paper,the 2.6 vol%TiBw/Ti6Al4V composites with network architecture were fabricated by hot press sintering(HPS)at 1100℃ for 1 h,and the quantitative relationships between phases and heat treatment temperature... In this paper,the 2.6 vol%TiBw/Ti6Al4V composites with network architecture were fabricated by hot press sintering(HPS)at 1100℃ for 1 h,and the quantitative relationships between phases and heat treatment temperatures were established.The results showed that the volume fraction phases changed linearly with a range of solution temperature(930-1010℃)and aging temperature(400-600℃).Moreover,the composites with equiaxed microstructure were obtained due to the static recrystallization after solution treated at 950℃ for 1 h and aging treated at 600℃ for 12 h.The ultimate high temperature tensile strengths were 772,658,392 and 182 MPa,and the elongations were 9.1%,12.5%,28.6%and 35.3%at 400,500,600 and 700℃,respectively.In addition,fractured morphology analysis indicated the excellent strengthening effect of TiBw at a temperature below 600℃.However,the strengthening effect was significantly reduced due to the debonding of matrix and TiBw at 700℃ and caused the cracks to propagate along the grain boundary. 展开更多
关键词 titanium matrix composites(TMCs) heat treatment mechanical properties microstructure evolution
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部