The analytical approach and the thermomechanical behavior of a Cr-Ni-Mo-Mn-N austenitic stainless steel were characterized based on the parameters of work hardening (h), dynamic recovery (r) and dynamic recrystallizat...The analytical approach and the thermomechanical behavior of a Cr-Ni-Mo-Mn-N austenitic stainless steel were characterized based on the parameters of work hardening (h), dynamic recovery (r) and dynamic recrystallization (n, t<sub>0.5</sub>), considering constitutive equations (σ, ε) and deformation conditions expressed according to the Zener-Hollomon parameter (Z). The results indicated that the curves were affected by the deformation conditions and that the stress levels increased with Z under high work hardening rates. The σ<sub>c</sub>/σ<sub>p</sub> ratio was relatively high in the first part of the curves, indicating that softening was promoted by intense dynamic recovery (DRV). This was corroborated by the high values of r and average stacking fault energy, γ<sub>s</sub><sub>fe</sub> = 66.86 mJ/m<sup>2</sup>, which facilitated the thermally activated mechanisms, increasing the effectiveness of DRV and delaying the onset of dynamic recrystallization (DRX). The second part of the curves indicates that there was a delay in the kinetics of dynamic softening, with a higher value of t<sub>0.5</sub> and lower values of the Avrami exponent (n) due to the competing DRV-DRX mechanisms, and steady state stress (σ<sub>ss</sub>) was achieved under higher rates of deformation.展开更多
Hot-formed components are constantly exposed to hostile environments with corrosive substances. Microstructural changes caused by thermomechanical processing can be predicted to increase the corrosion resistance of au...Hot-formed components are constantly exposed to hostile environments with corrosive substances. Microstructural changes caused by thermomechanical processing can be predicted to increase the corrosion resistance of austenitic stainless steels. The objective of this study is to understand the relationship between the dynamic softening mechanisms and corrosion resistance, thus optimizing the hot-forming process. In the current work, the dynamic recrystallization (DRX) behavior of AISI 316 L austenitic stainless steel was studied in the temperature range of 1273 - 1423 K and strain-rate range of 0.1 - 5.0 s-1 using physical simulation. Subsequently, potentiodynamic polarization tests and scanning electron microscopy were performed on the hot-deformed samples to investigate the influence of temperature and strain-rate on the corrosion resistance and mechanical properties. The results indicated that the DRX fractions increased under low-temperature and high strain-rate conditions, resulting in grain refinement. The potentiodynamic polarization tests indicated that the dynamically recovered samples demonstrated high resistance to corrosion compared with the DRX samples. The best route found for the investigated alloy was for the strain to be applied at a temperature of 1423 K and a strain rate of 0.1 s-1.展开更多
文摘The analytical approach and the thermomechanical behavior of a Cr-Ni-Mo-Mn-N austenitic stainless steel were characterized based on the parameters of work hardening (h), dynamic recovery (r) and dynamic recrystallization (n, t<sub>0.5</sub>), considering constitutive equations (σ, ε) and deformation conditions expressed according to the Zener-Hollomon parameter (Z). The results indicated that the curves were affected by the deformation conditions and that the stress levels increased with Z under high work hardening rates. The σ<sub>c</sub>/σ<sub>p</sub> ratio was relatively high in the first part of the curves, indicating that softening was promoted by intense dynamic recovery (DRV). This was corroborated by the high values of r and average stacking fault energy, γ<sub>s</sub><sub>fe</sub> = 66.86 mJ/m<sup>2</sup>, which facilitated the thermally activated mechanisms, increasing the effectiveness of DRV and delaying the onset of dynamic recrystallization (DRX). The second part of the curves indicates that there was a delay in the kinetics of dynamic softening, with a higher value of t<sub>0.5</sub> and lower values of the Avrami exponent (n) due to the competing DRV-DRX mechanisms, and steady state stress (σ<sub>ss</sub>) was achieved under higher rates of deformation.
文摘Hot-formed components are constantly exposed to hostile environments with corrosive substances. Microstructural changes caused by thermomechanical processing can be predicted to increase the corrosion resistance of austenitic stainless steels. The objective of this study is to understand the relationship between the dynamic softening mechanisms and corrosion resistance, thus optimizing the hot-forming process. In the current work, the dynamic recrystallization (DRX) behavior of AISI 316 L austenitic stainless steel was studied in the temperature range of 1273 - 1423 K and strain-rate range of 0.1 - 5.0 s-1 using physical simulation. Subsequently, potentiodynamic polarization tests and scanning electron microscopy were performed on the hot-deformed samples to investigate the influence of temperature and strain-rate on the corrosion resistance and mechanical properties. The results indicated that the DRX fractions increased under low-temperature and high strain-rate conditions, resulting in grain refinement. The potentiodynamic polarization tests indicated that the dynamically recovered samples demonstrated high resistance to corrosion compared with the DRX samples. The best route found for the investigated alloy was for the strain to be applied at a temperature of 1423 K and a strain rate of 0.1 s-1.
