La-doped Pt/TiO_2 as an efficient catalyst for room temperature oxidation of low concentration HCHO

Catalytic oxidation of formaldehyde (HCHO) is the most efficient way to purify indoor air of HCHO pollutant. This work investigated rare earth La‐doped Pt/TiO2 for low concentration HCHO oxidation at room temperature. La‐doped Pt/TiO2 had a dramatically promoted catalytic performance for HCHO oxidation. The reasons for the La promotion effect were investigated by N2 adsorption, X‐raydiffraction, CO chemisorption, X‐ray photoelectron spectroscopy, transmission electron microscopy(TEM) and high‐angle annular dark field scanning TEM. The Pt nanoparticle size was reduced to 1.7nm from 2.2 nm after modification by La, which led to higher Pt dispersion, more exposed activesites and enhanced metal‐support interaction. Thus a superior activity for indoor low concentrationHCHO oxidation was obtained. Moreover, the La‐doped TiO2 can be wash‐coated on a cordieritemonolith so that very low amounts of Pt (0.01 wt%) can be used. The catalyst was evaluated in asimulated indoor HCHO elimination environment and displayed high purifying efficiency and stability.It can be potentially used as a commercial catalyst for indoor HCHO elimination.

Three-dimensionally ordered macroporous SnO_2-based solid solution catalysts for effective soot oxidation

A series of three‐dimensionally ordered macroporous(3DOM)SnO2‐based catalysts modified by the cations Ce4+,Mn3+,and Cu2+have been prepared by using a colloidal crystal templating method and tested for soot combustion under loose contact condition.XRD and STEM mapping results confirm that all the secondary metal cations have entered the lattice matrix of tetragonal rutile SnO2 to form non‐continuous solid solutions,thus impeding crystallization and improving the surface areas and pore volumes of the modified catalysts.In comparison with regular SnO2 nanoparticles,the 3DOM SnO2 displays evidently improved activity,testifying that the formation of the 3DOM structure can anchor the soot particulates in the macro‐pores,which ensures that the contact of the soot particles with the active sites on the 3DOM skeleton is more easily formed,thus benefiting the target reaction.With the incorporation of the secondary metal cations,the activity of the catalyst can be further improved due to the formation of more abundant mobile oxygen species.In summary,these effects are believed to be the major factors responsible for the activity of the catalyst.

Tuning SnO_2 surface with CuO for soot particulate combustion: The effect of monolayer dispersion capacity on reaction performance

With the objective to investigate the structure-reactivity relationship of CuO/SnO2 and eventually design more applicable catalysts for soot combustion,catalysts with different CuO loadings have been prepared by impregnation method.By using X-ray diffraction and X-ray photoelectron spectroscopy extrapolation methods,it is disclosed that CuO disperses finely on the SnO2 support to form a monolayer with a capacity of 2.09 mmol 100 m^-2,which equals 4.8 wt%CuO loading.When the CuO loading is below the capacity,it is in a sub-monolayer state.However,when the loading is above the capacity,CuO micro-crystallites will be formed that coexist with the CuO monolayer.The soot combustion activity of the catalyst increases with the CuO loading until it reaches the monolayer dispersion capacity.A further increase in the CuO loading has no evident influence on the activity.Raman results have testified that with the addition of CuO onto the SnO2 support,a surface-active oxygen species can be formed,the amount of which also increases significantly with the increase in the CuO loading until it reaches the monolayer dispersion capacity.Increasing the CuO loading further has no evident impact on the amount of surface oxygen.Therefore,an apparent monolayer dispersion threshold effect is observed for soot combustion over CuO/SnO2 catalysts.It is concluded that the amount of surface-active oxygen sites is the major factor determining the activity of the catalyst.