Preparation and characterization of neodymium hydroxide powder via the hydration method

The preparation of Nd(OH)3 powder by the direct hydration method using Nd2O3 as a raw material was studied,and the effects of stirring mode,H2O and Nd2O3 molar ratio,stirring rate,and reaction time on temperature change and conversion rate in a hydration system were analyzed.The reasonable process conditions for the direct hydration of Nd(OH)3 by Nd2O3 were then determined.Process,morphology,and structure were considered in the preparation of neodymium hydroxide powder,and its composition was investigated by X-ray powder diffraction,scanning electron microscopy,laser particle size analysis,thermogravimetric differential thermal analysis,and chemical analysis.It has been proved that the process is simple and feasible,in line with the concept of modern green chemistry,and the products also meet the market requirements.

A robust membrane with dual superlyophobicity for solving water-caused lubricant deterioration and water contamination

Lubricants are often contaminated by water in different ways. Water-polluted lubricants extremely accelerate wear corrosion, leading to the deterioration of lubricity performance. Recently, multiphase media superwettability has been developed to endow one surface with compatible functions, such as on-demand separation of oily wastewater. However, realizing the robustness of the dual superlyophobic surface to solve water-caused lubricant deterioration and water contamination as needed remains challenges. Herein, a robust dual superlyophobic membrane is presented to realize on-demand separation for various lubricant–water emulsions. Compared to pure lubricants, the purified lubricants have equivalent tribology performance, which are much better than that of water-polluted lubricants. The as-prepared membrane maintains dual superlyophobicity, high-efficient for water or lubricant purification, and excellent tribology performance of the purified lubricant, even after immersion in hot liquids for 24 h, multicycle separation, and sandpaper abrasion for 50 cycles. Water-polluted lubricant extremely accelerates wear corrosion to promote catalytic dehydrogenation of lubricants, generating too much harmful carbon-based debris. This work shows great guiding significance for recovering the tribology performance of water-polluted lubricants and purifying water by the dual superlyophobic membrane.

Electron transfer dominated triboelectrification at the hydrophobic/slippery substrate-water interfaces

Triboelectric nanogenerator(TENG)based on triboelectrification has attracted wide attention due to its effective utilization of green energy sources such as marine energy.However,researches about liquid-liquid triboelectrification are still scanty as solid-liquid triboelectrification has been widely studied.Herein,this work focuses on the hydrophobic/slippery substrate-water interfacial triboelectrification based on the solid friction materials of polytetrafluoroethylene(PTFE)nanoparticles.The hydrophobic/slippery substrate-water interfacial triboelectrification are studied by assembling PTFE coated Al sheets and perfluoropolyether(PFPE)infused PTFE coated Al sheets(formed the slippery lubricant-infused surfaces(SLIPSs))as the friction electrode,and water as liquid friction materials,respectively.The results show that the hydrophobic TENG output performances improved as the PTFE nanoparticles cumulating,and the SLIPSs TENG output performances increased with the thinner PFPE thickness.Both the triboelectrification behavior of hydrophobic/SLIPSs TENG assembled in this work are dominated by the electron transfer.Thanks to the introduction of SLIPSs,the SLIPSs TENG exhibits superior stability and durability than the hydrophobic TENG.The investigation of hydrophobic/slippery substrate-water interfacial triboelectrification contributes to optimize the TENG performances,and expands the application in harsh environments including low temperature and high humidity on the ocean.