We developed a model to estimate supply potentials and available amounts of timber and forest biomass resources from profitable sub-compartments of thinning and final felling operations. Economic balances were estimat...We developed a model to estimate supply potentials and available amounts of timber and forest biomass resources from profitable sub-compartments of thinning and final felling operations. Economic balances were estimated while considering not only harvesting expenses but also reforestation expenses after final felling, which should be considered for sustainable forest management. Harvesting expenses were estimated based on two types of timber harvesting systems and three types of forest biomass harvesting systems in each sub-compartment. Then, the model was applied to Nasushiobara city of Tochigi prefecture, Japan. Reforestation expenses had large negative impacts on the financial balances of final felling operations. Few sub-compartments were profitable after considering reforestation expenses. Most profitable sub-compartments were those with mechanized operation systems and landing sales. These accounted for 17.19% of all sub-compartments, while only 5.75% of the sub-compartments were profitable based on their current operation systems and landing sales. Although the overall supply potentials of timber and forest biomass resources were 380,000 m3 and 210,000 Mg, respectively, and 15 times the planned harvest of coniferous tree volume of 25,000 m3year-1 and 50 times the annual demand for the woody gasification power generation of 4,000 Mg year-1 in Nasushiobara, available amounts of timber and forest biomass resources were only49,429 m3 and 33,333 Mg, which were 13.0% and 15.7% of supply potentials for landing sales with mechanized operation systems.展开更多
We investigated a developed arm roll forwarder at Nasu in Tochigi Prefecture, Japan. An arm roll forwarder can only load a steel container that has been fully loaded with logs beforehand, and can later unload such a c...We investigated a developed arm roll forwarder at Nasu in Tochigi Prefecture, Japan. An arm roll forwarder can only load a steel container that has been fully loaded with logs beforehand, and can later unload such a container. Such a forwarder can shorten the loading and untoading times and improve operational efficiency. We examined two operation systems with an arm roll forwarder and a forwarder. In the first system the loading was done with a grapple-loader. In the second system the loading was done with a processor. The loading times of an arm roll forwarder were significantly tess than those of a forwarder. Because the optimal cycle times (excluding the waiting times for an arm roll for- warder) were significantly reduced, the costs of using an arm roll for- warder are lower, although the loading capacity was small and the hourly operation cost was high. The maximum operational efficiencies varied depending on forwarding distances. The second operation system with an arm roll forwarder exhibited the best operational efficiency within a 1,580-m forwarding distance, and beyond that distance it exhibited the highest operational efficiency when a forwarder was used. Similarly, the cost of operation of the system with an arm roll forwarder was the lowest within a 1,130-m forwarding distance, and beyond that distance the cost was the lowest when using the forwarder. Therefore, the arm roll for- warder is effective within a certain forwarding distance.展开更多
We investigated forest road networks and forestry operations before and after mechanization on aggregated forestry operation sites. We developed equations to estimate densities of road networks with average slope angl...We investigated forest road networks and forestry operations before and after mechanization on aggregated forestry operation sites. We developed equations to estimate densities of road networks with average slope angles, operational efficiency of bunching operations with road network density, and average forwarding distances with operation site areas. Subsequently, we analyzed the effects of aggregating forests, establishing forest road networks, and mechanization on operational efficiency and costs. Six ha proved to be an appropriate operation site area with minimum operation expenses. The operation site areas of the forest owners' cooperative in this region aggregated approximately 6 ha and the cooperative conducted forestry operations on aggregated sites. Therefore, 6 ha would be an appropriate operation site area in this region. Regarding road network density, higher-density road networks increased operational expenses due to the higher direct operational expenses of strip road establishment. Therefore, road network density should be reduced to approximately 200 m.展开更多
We used GIS on a regional scale to estimate and compare supply potentials and costs of small-scale logging systems, a mini-forwarder and a 4-ton truck operated by private logging contractors, and manual logging and a ...We used GIS on a regional scale to estimate and compare supply potentials and costs of small-scale logging systems, a mini-forwarder and a 4-ton truck operated by private logging contractors, and manual logging and a light truck operated by individual forest own- ers, with the mechanized operational system of the Forest Owners' Asso- ciation. Total potential yields of timber and logging residues were esti- mated as 418,895 m3 and 254,962 m3, respectively. The economic bal- ances were estimated and available amounts were projected as supply potentials from profitable sub-compartments. As a result, available amounts of timber and logging residues were estimated at 375,466 m3 (89.9%) and 203,850 m3 (80.0%), respectively. Because their transport expenses were lower than for other systems the most profitable sub-compartments were operated by private logging contractors who sold logging residues at a plant. The profitable sub-compartments operated by individual forest owners were few because the extracting distances were usually greater than 20 m. Raising logging residue prices from 3,000 yen·m-3 to 4,080 yen·m-3 or 6,800 yen·m-3, and establishing forest roads, which reduced some extracting distances to less than 20 m, increased the number and area of profitable sub*compartments, and increased available amounts of logging residues.展开更多
文摘We developed a model to estimate supply potentials and available amounts of timber and forest biomass resources from profitable sub-compartments of thinning and final felling operations. Economic balances were estimated while considering not only harvesting expenses but also reforestation expenses after final felling, which should be considered for sustainable forest management. Harvesting expenses were estimated based on two types of timber harvesting systems and three types of forest biomass harvesting systems in each sub-compartment. Then, the model was applied to Nasushiobara city of Tochigi prefecture, Japan. Reforestation expenses had large negative impacts on the financial balances of final felling operations. Few sub-compartments were profitable after considering reforestation expenses. Most profitable sub-compartments were those with mechanized operation systems and landing sales. These accounted for 17.19% of all sub-compartments, while only 5.75% of the sub-compartments were profitable based on their current operation systems and landing sales. Although the overall supply potentials of timber and forest biomass resources were 380,000 m3 and 210,000 Mg, respectively, and 15 times the planned harvest of coniferous tree volume of 25,000 m3year-1 and 50 times the annual demand for the woody gasification power generation of 4,000 Mg year-1 in Nasushiobara, available amounts of timber and forest biomass resources were only49,429 m3 and 33,333 Mg, which were 13.0% and 15.7% of supply potentials for landing sales with mechanized operation systems.
文摘We investigated a developed arm roll forwarder at Nasu in Tochigi Prefecture, Japan. An arm roll forwarder can only load a steel container that has been fully loaded with logs beforehand, and can later unload such a container. Such a forwarder can shorten the loading and untoading times and improve operational efficiency. We examined two operation systems with an arm roll forwarder and a forwarder. In the first system the loading was done with a grapple-loader. In the second system the loading was done with a processor. The loading times of an arm roll forwarder were significantly tess than those of a forwarder. Because the optimal cycle times (excluding the waiting times for an arm roll for- warder) were significantly reduced, the costs of using an arm roll for- warder are lower, although the loading capacity was small and the hourly operation cost was high. The maximum operational efficiencies varied depending on forwarding distances. The second operation system with an arm roll forwarder exhibited the best operational efficiency within a 1,580-m forwarding distance, and beyond that distance it exhibited the highest operational efficiency when a forwarder was used. Similarly, the cost of operation of the system with an arm roll forwarder was the lowest within a 1,130-m forwarding distance, and beyond that distance the cost was the lowest when using the forwarder. Therefore, the arm roll for- warder is effective within a certain forwarding distance.
文摘We investigated forest road networks and forestry operations before and after mechanization on aggregated forestry operation sites. We developed equations to estimate densities of road networks with average slope angles, operational efficiency of bunching operations with road network density, and average forwarding distances with operation site areas. Subsequently, we analyzed the effects of aggregating forests, establishing forest road networks, and mechanization on operational efficiency and costs. Six ha proved to be an appropriate operation site area with minimum operation expenses. The operation site areas of the forest owners' cooperative in this region aggregated approximately 6 ha and the cooperative conducted forestry operations on aggregated sites. Therefore, 6 ha would be an appropriate operation site area in this region. Regarding road network density, higher-density road networks increased operational expenses due to the higher direct operational expenses of strip road establishment. Therefore, road network density should be reduced to approximately 200 m.
文摘We used GIS on a regional scale to estimate and compare supply potentials and costs of small-scale logging systems, a mini-forwarder and a 4-ton truck operated by private logging contractors, and manual logging and a light truck operated by individual forest own- ers, with the mechanized operational system of the Forest Owners' Asso- ciation. Total potential yields of timber and logging residues were esti- mated as 418,895 m3 and 254,962 m3, respectively. The economic bal- ances were estimated and available amounts were projected as supply potentials from profitable sub-compartments. As a result, available amounts of timber and logging residues were estimated at 375,466 m3 (89.9%) and 203,850 m3 (80.0%), respectively. Because their transport expenses were lower than for other systems the most profitable sub-compartments were operated by private logging contractors who sold logging residues at a plant. The profitable sub-compartments operated by individual forest owners were few because the extracting distances were usually greater than 20 m. Raising logging residue prices from 3,000 yen·m-3 to 4,080 yen·m-3 or 6,800 yen·m-3, and establishing forest roads, which reduced some extracting distances to less than 20 m, increased the number and area of profitable sub*compartments, and increased available amounts of logging residues.