The main objective of this project is quality improvement of Sudanese petrodiesel fuel by the use of furfural. The Gas Chromatography Mass Spectrometry GC/MS technique was performed to analyze organic compounds for ma...The main objective of this project is quality improvement of Sudanese petrodiesel fuel by the use of furfural. The Gas Chromatography Mass Spectrometry GC/MS technique was performed to analyze organic compounds for marked petrodiesel fuel before and after treatment by furfural, physicochemical characteristics of petrodiesel fuel were investigated before and after treatment according to American Society for Testing and Materials (ASTM), characteristics include: density, distillation, cloud point, viscosity, ash content, micro carbon residue, water content, flash point, colour, copper strip corrosion, sulfur content and calculated cetane number. Elements composition of petrodiesel sample has been determined by Inductively coupled plasma (ICP). The furfural showed high ability in extraction of aromatic, cyclo and branched hydrocarbons, a total of 81 organic compounds that exhibit a negative effect on quality of petrodiesel have been removed by furfural. All physicochemical characteristics of petrodiesel fuel were improved within permissible limits assigned by ASTM. The furfural has shown no effect on colour of Sudanese Petrodiesel, which cetane number has increased from 54.46 to 58.36. The concentration of Na, Mg, Ca, Fe, Al and As have been decreased after treatment by furfural, these results have led to decrease of ash content.展开更多
The amount iron content of the extracts and samples of Acacia species was determined. Since the iron hinders the process of retanning leather, iron content is determined by wet digestion method and atomic absorption s...The amount iron content of the extracts and samples of Acacia species was determined. Since the iron hinders the process of retanning leather, iron content is determined by wet digestion method and atomic absorption spectrophotometry. The iron contents of bark extract of Acacia nilotica, Acacia senegal and Acacia seyal were 0.0044%, 0.0040% and 0.0029% respectively. In contrast, the iron content of bark extract of the three species of Acacia had lower percentage compared to that of Mimosa (Acacia mearnsii) (0.0047%), which was imported from Kenya. The iron content presented in leaves, barks, mature and immature fruits of Acacia species were determined by the same analytical methods. Bark and mature fruits of Acacia nilotica had the highest and equal percentage (0.1450%). The percentage of iron content of leaves and bark of Acacia seyal had equal percentage (0.0750%), while the bark of Acacia senegal had much lower percentage (0.0375%).展开更多
文摘The main objective of this project is quality improvement of Sudanese petrodiesel fuel by the use of furfural. The Gas Chromatography Mass Spectrometry GC/MS technique was performed to analyze organic compounds for marked petrodiesel fuel before and after treatment by furfural, physicochemical characteristics of petrodiesel fuel were investigated before and after treatment according to American Society for Testing and Materials (ASTM), characteristics include: density, distillation, cloud point, viscosity, ash content, micro carbon residue, water content, flash point, colour, copper strip corrosion, sulfur content and calculated cetane number. Elements composition of petrodiesel sample has been determined by Inductively coupled plasma (ICP). The furfural showed high ability in extraction of aromatic, cyclo and branched hydrocarbons, a total of 81 organic compounds that exhibit a negative effect on quality of petrodiesel have been removed by furfural. All physicochemical characteristics of petrodiesel fuel were improved within permissible limits assigned by ASTM. The furfural has shown no effect on colour of Sudanese Petrodiesel, which cetane number has increased from 54.46 to 58.36. The concentration of Na, Mg, Ca, Fe, Al and As have been decreased after treatment by furfural, these results have led to decrease of ash content.
文摘The amount iron content of the extracts and samples of Acacia species was determined. Since the iron hinders the process of retanning leather, iron content is determined by wet digestion method and atomic absorption spectrophotometry. The iron contents of bark extract of Acacia nilotica, Acacia senegal and Acacia seyal were 0.0044%, 0.0040% and 0.0029% respectively. In contrast, the iron content of bark extract of the three species of Acacia had lower percentage compared to that of Mimosa (Acacia mearnsii) (0.0047%), which was imported from Kenya. The iron content presented in leaves, barks, mature and immature fruits of Acacia species were determined by the same analytical methods. Bark and mature fruits of Acacia nilotica had the highest and equal percentage (0.1450%). The percentage of iron content of leaves and bark of Acacia seyal had equal percentage (0.0750%), while the bark of Acacia senegal had much lower percentage (0.0375%).
